Ada Reference Manual (Ada 2022)Legal Information
Contents   Index   References   Search   Previous   Next 

13.13.2 Stream-Oriented Attributes

1/3
The type-related operational attributes Write, Read, Output, and Input convert values to a stream of elements and reconstruct values from a stream. 

Static Semantics

1.1/2
 For every subtype S of an elementary type T, the following representation attribute is defined: 
1.2/3
 S'Stream_Size

Denotes the number of bits read from or written to a stream by the default implementations of S'Read and S'Write. Hence, the number of stream elements required per item of elementary type T is:
1.3/2
T'Stream_Size / Ada.Streams.Stream_Element'Size
1.4/2
The value of this attribute is of type universal_integer and is a multiple of Stream_Element'Size.
1.5/2
Stream_Size may be specified for first subtypes via an attribute_definition_clause; the expression of such a clause shall be static, nonnegative, and a multiple of Stream_Element'Size.

Implementation Advice

1.6/2
 If not specified, the value of Stream_Size for an elementary type should be the number of bits that corresponds to the minimum number of stream elements required by the first subtype of the type, rounded up to the nearest factor or multiple of the word size that is also a multiple of the stream element size. 
1.7/2
 The recommended level of support for the Stream_Size attribute is: 
1.8/2
A Stream_Size clause should be supported for a discrete or fixed point type T if the specified Stream_Size is a multiple of Stream_Element'Size and is no less than the size of the first subtype of T, and no greater than the size of the largest type of the same elementary class (signed integer, modular integer, enumeration, ordinary fixed point, or decimal fixed point). 

Static Semantics

2
For every subtype S of a specific type T, the following attributes are defined. 
3
S'Write
S'Write denotes a procedure with the following specification: 
4/2
procedure S'Write(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class;
   Item : in T)
5
S'Write writes the value of Item to Stream.
6
S'Read
S'Read denotes a procedure with the following specification: 
7/2
procedure S'Read(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class;
   Item : out T)
8
S'Read reads the value of Item from Stream
8.1/5
 This paragraph was deleted.
8.2/2
 The default implementations of the Write and Read attributes, where available, execute as follows:
9/5
For nonderived elementary types, Read reads (and Write writes) the number of stream elements implied by the Stream_Size for the type T; the representation of those stream elements is implementation defined. For nonderived composite types, the Write or Read attribute for each component (excluding those, if any, that are not components of the nominal type of the object) is called in canonical order, which is last dimension varying fastest for an array (unless the convention of the array is Fortran, in which case it is first dimension varying fastest), and positional aggregate order for a record. Bounds are not included in the stream if T is an array type. If T is a discriminated type, discriminants are included only if they have defaults. If T is a tagged type, the tag is not included. 
9.1/5
 For type extensions, the Write or Read attribute for the parent type is called, followed by the Write or Read attribute of each component of the extension part, in canonical order. For a limited type extension, if the attribute of the parent type or any progenitor type of T is available anywhere within the immediate scope of T, and the attribute of the parent type or the type of any of the extension components is not available at the freezing point of T, then the attribute of T shall be directly specified. For untagged derived types, the Write (resp. Read) attribute invokes the corresponding attribute of the parent type, if the attribute is available for the parent type.
9.2/5
 If T is a discriminated type and its discriminants have defaults, then S'Read first reads the discriminants from the stream without modifying Item. S'Read then creates an object of type T constrained by these discriminants. The value of this object is then converted to the subtype of Item and is assigned to Item. Finally, the Read attribute for each nondiscriminant component of Item is called in canonical order as described above. Normal default initialization and finalization take place for the created object.
9.3/5
 Constraint_Error is raised by the predefined Write attribute if the value of the elementary item is outside the range of values representable using Stream_Size bits. For a signed integer type, an enumeration type, or a fixed point type, the range is unsigned only if the integer code for the lower bound of the first subtype is nonnegative, and a (symmetric) signed range that covers all values of the first subtype would require more than Stream_Size bits; otherwise, the range is signed.
10
For every subtype S'Class of a class-wide type T'Class: 
11
S'Class'Write
S'Class'Write denotes a procedure with the following specification: 
12/2
procedure S'Class'Write(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class;
   Item   : in T'Class)
13
Dispatches to the subprogram denoted by the Write attribute of the specific type identified by the tag of Item.
14
S'Class'Read
S'Class'Read denotes a procedure with the following specification: 
15/2
procedure S'Class'Read(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class;
   Item : out T'Class)
16
Dispatches to the subprogram denoted by the Read attribute of the specific type identified by the tag of Item.
Paragraph 17 was deleted. 

Static Semantics

18
For every subtype S of a specific type T, the following attributes are defined. 
19
S'Output
S'Output denotes a procedure with the following specification: 
20/2
procedure S'Output(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class;
   Item : in T)
21
S'Output writes the value of Item to Stream, including any bounds or discriminants. 
22
S'Input
S'Input denotes a function with the following specification: 
23/2
function S'Input(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class)
   return T
24
S'Input reads and returns one value from Stream, using any bounds or discriminants written by a corresponding S'Output to determine how much to read. 
25/5
For an untagged derived type, the default implementation of the Output (resp. Input) attribute invokes the corresponding attribute of the parent type, if the attribute is available for the parent type. For any other type, the default implementations of the Output and Input attributes, where available, execute as follows:
26/3
If T is an array type, S'Output first writes the bounds, and S'Input first reads the bounds. If T has discriminants without defaults, S'Output first writes the discriminants (using the Write attribute of the discriminant type for each), and S'Input first reads the discriminants (using the Read attribute of the discriminant type for each).
27/3
S'Output then calls S'Write to write the value of Item to the stream. S'Input then creates an object of type T, with the bounds or (when without defaults) the discriminants, if any, taken from the stream, passes it to S'Read, and returns the value of the object. If T has discriminants, then this object is unconstrained if and only the discriminants have defaults. Normal default initialization and finalization take place for this object (see 3.3.1, 7.6, and 7.6.1).
27.1/2
  If T is an abstract type, then S'Input is an abstract function.
28
For every subtype S'Class of a class-wide type T'Class: 
29
S'Class'Output

S'Class'Output denotes a procedure with the following specification: 
30/2
procedure S'Class'Output(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class;
   Item   : in T'Class)
31/2
First writes the external tag of Item to Stream (by calling String'Output(Stream, Tags.External_Tag(Item'Tag)) — see 3.9) and then dispatches to the subprogram denoted by the Output attribute of the specific type identified by the tag. Tag_Error is raised if the tag of Item identifies a type declared at an accessibility level deeper than that of S. 
32
S'Class'Input
S'Class'Input denotes a function with the following specification: 
33/2
function S'Class'Input(
   Stream : not null access Ada.Streams.Root_Stream_Type'Class)
   return T'Class
34/5
First reads the external tag from Stream and determines the corresponding internal tag (by calling Tags.Descendant_Tag(String'Input(Stream), S'Tag) which can raise Tag_Error — see 3.9) and then dispatches to the subprogram denoted by the Input attribute of the specific type identified by the internal tag; returns that result. If the specific type identified by the internal tag is abstract, Constraint_Error is raised.
35/3
In the default implementation of Read and Input for a composite type, for each scalar component that is a discriminant or that has an implicit initial value, a check is made that the value returned by Read for the component belongs to its subtype. Constraint_Error is raised if this check fails. For other scalar components, no check is made. For each component that is of an access type, if the implementation can detect that the value returned by Read for the component is not a value of its subtype, Constraint_Error is raised. If the value is not a value of its subtype and this error is not detected, the component has an abnormal value, and erroneous execution can result (see 13.9.1). In the default implementation of Read for a composite type with defaulted discriminants, if the actual parameter of Read is constrained, a check is made that the discriminants read from the stream are equal to those of the actual parameter. Constraint_Error is raised if this check fails.
36/2
It is unspecified at which point and in which order these checks are performed. In particular, if Constraint_Error is raised due to the failure of one of these checks, it is unspecified how many stream elements have been read from the stream.
37/1
In the default implementation of Read and Input for a type, End_Error is raised if the end of the stream is reached before the reading of a value of the type is completed.
37.1/5
  The Nonblocking aspect is statically True and the Global aspect is null for the default implementations of stream-oriented attributes for elementary types. For the default implementations of stream-oriented attributes for composite types, the value of the Nonblocking aspect is that of the first subtype, and the Global aspect defaults to that of the first subtype. A default implementation of a stream-oriented attribute that has the Nonblocking aspect statically True is considered a nonblocking region. The aspect Dispatching (see H.7.1) is Read(Stream) for the default implementations of the stream-oriented attributes Read, Read'Class, Input, and Input'Class; the aspect Dispatching is Write(Stream) for the default implementations of the stream-oriented attributes Write, Write'Class, Output, and Output'Class.
38/5
The stream-oriented attributes may be specified for any type via an attribute_definition_clause. Alternatively, each of the specific stream-oriented attributes may be specified using an aspect_specification on any type_declaration, with the aspect name being the corresponding attribute name. Each of the class-wide stream-oriented attributes may be specified using an aspect_specification for a tagged type T using the name of the stream-oriented attribute followed by 'Class; such class-wide aspects do not apply to other descendants of T. If not directly specified, a default implementation of a stream-oriented attribute is implicitly composed for a nonlimited type, and for certain limited types, as defined above.
38.1/4
  The subprogram name given in such an attribute_definition_clause or aspect_specification shall statically denote a subprogram that is not an abstract subprogram. Furthermore, if a specific stream-oriented attribute is specified for an interface type, the subprogram name given in the attribute_definition_clause or aspect_specification shall statically denote a null procedure.
39/2
A stream-oriented attribute for a subtype of a specific type T is available at places where one of the following conditions is true:
40/2
T is nonlimited.
41/2
The attribute_designator is Read (resp. Write) and T is a limited record extension, and the attribute Read (resp. Write) is available for the parent type of T and for the types of all of the extension components. 
42/5
T is a limited untagged derived type, and the attribute is available for the parent type. 
43/2
The attribute_designator is Input (resp. Output), and T is a limited type, and the attribute Read (resp. Write) is available for T
44/5
The attribute has been specified via an attribute_definition_clause or aspect_specification, and the attribute_definition_clause or aspect_specification is visible. 
45/2
A stream-oriented attribute for a subtype of a class-wide type T'Class is available at places where one of the following conditions is true:
46/2
T is nonlimited;
47/5
the attribute has been specified via an attribute_definition_clause or aspect_specification, and the attribute_definition_clause or aspect_specification is visible; or
48/2
the corresponding attribute of T is available, provided that if T has a partial view, the corresponding attribute is available at the end of the visible part where T is declared.
49/4
An attribute_reference for one of the stream-oriented attributes is illegal unless the attribute is available at the place of the attribute_reference. Furthermore, an attribute_reference for T'Input is illegal if T is an abstract type. In addition to the places where Legality Rules normally apply (see 12.3), these rules also apply in the private part of an instance of a generic unit.
49.1/5
  Unless available for a parent type, if any, for an untagged type having a task, protected, or explicitly limited record part, the default implementation of each of the Read, Write, Input, and Output attributes raises Program_Error and performs no other action.
50/3
In the parameter_and_result_profiles for the default implementations of the stream-oriented attributes, the subtype of the Item parameter is the base subtype of T if T is a scalar type, and the first subtype otherwise. The same rule applies to the result of the Input attribute.
51/5
For an attribute_definition_clause or aspect_specification specifying one of these attributes, the subtype of the Item parameter shall be the first subtype or the base subtype if scalar, and the first subtype if not scalar. The same rule applies to the result of the Input function.
52/3
A type is said to support external streaming if Read and Write attributes are provided for sending values of such a type between active partitions, with Write marshalling the representation, and Read unmarshalling the representation. A limited type supports external streaming only if it has available Read and Write attributes. A type with a part that is of a nonremote access type supports external streaming only if that access type or the type of some part that includes the access type component, has Read and Write attributes that have been specified via an attribute_definition_clause, and that attribute_definition_clause is visible. An anonymous access type does not support external streaming. All other types (including remote access types, see E.2.2) support external streaming.

Erroneous Execution

53/2
If the internal tag returned by Descendant_Tag to T'Class'Input identifies a type that is not library-level and whose tag has not been created, or does not exist in the partition at the time of the call, execution is erroneous. 

Implementation Requirements

54/1
For every subtype S of a language-defined nonlimited specific type T, the output generated by S'Output or S'Write shall be readable by S'Input or S'Read, respectively. This rule applies across partitions if the implementation conforms to the Distributed Systems Annex.
55/3
If Constraint_Error is raised during a call to Read because of failure of one the above checks, the implementation shall ensure that the discriminants of the actual parameter of Read are not modified. 

Implementation Permissions

56/5
The number of calls performed by the predefined implementation of the stream-oriented attributes on the Read and Write operations of the stream type is unspecified. An implementation may take advantage of this permission to perform internal buffering. However, all the calls on the Read and Write operations of the stream type used to implement an explicit invocation of a stream-oriented attribute shall take place before this invocation returns. An explicit invocation is one appearing explicitly in the program text, possibly through a generic instantiation (see 12.3).
56.1/5
  If T is a discriminated type and its discriminants have defaults, then in two cases an execution of the default implementation of S'Read is not required to create an anonymous object of type T: If the discriminant values that are read in are equal to the corresponding discriminant values of Item, then creation of a new object of type T may be bypassed and Item may be used instead. If they are not equal and Item is a constrained variable, then Constraint_Error may be raised at that point, before any further values are read from the stream and before the object of type T is created.
56.2/3
  A default implementation of S'Input that calls the default implementation of S'Read may create a constrained anonymous object with discriminants that match those in the stream. 
57/5
NOTE 1   For a definite subtype S of a type T, only T'Write and T'Read are necessary to pass an arbitrary value of the subtype through a stream. For an indefinite subtype S of a type T, T'Output and T'Input will normally be necessary, since T'Write and T'Read do not pass bounds, discriminants, or tags.
58
NOTE 2   User-specified attributes of S'Class are not inherited by other class-wide types descended from S. 

Examples

59
Example of user-defined Write attribute: 
60/2
procedure My_Write(
  Stream : not null access Ada.Streams.Root_Stream_Type'Class;
  Item   : My_Integer'Base);
for My_Integer'Write use My_Write;

Contents   Index   References   Search   Previous   Next 
Ada-Europe Ada 2005 and 2012 Editions sponsored in part by Ada-Europe