.. _Building_with_GPRbuild: ********************** Building with GPRbuild ********************** .. _Building_with_GPRbuild_Introduction: Introduction ============ `GPRbuild` is a generic build tool designed for the construction of large multi-language systems organized into subsystems and libraries. It is well-suited for compiled languages supporting separate compilation, such as Ada, C, C++ and Fortran. `GPRbuild` manages a three step build process. * compilation phase: Each compilation unit of each subsystem is examined in turn, checked for consistency, and compiled or recompiled when necessary by the appropriate compiler. The recompilation decision is based on dependency information that is typically produced by a previous compilation. * post-compilation phase (or binding): Compiled units from a given language are passed to a language-specific post-compilation tool if any. Also during this phase objects are grouped into static or dynamic libraries as specified. * linking phase: All units or libraries from all subsystems are passed to a linker tool specific to the set of toolchains being used. The tool is generic in that it provides, when possible, equivalent build capabilities for all supported languages. For this, it uses a configuration file :file:`.cgpr` that has a syntax and structure very similar to a project file, but which defines the characteristics of the supported languages and toolchains. The configuration file contains information such as: * the default source naming conventions for each language, * the compiler name, location and required options, * how to compute inter-unit dependencies, * how to build static or dynamic libraries, * which post-compilation actions are needed, * how to link together units from different languages. On the other hand, `GPRbuild` is not a replacement for general-purpose build tools such as `make` or `ant` which give the user a high level of control over the build process itself. When building a system requires complex actions that do not fit well in the three-phase process described above, `GPRbuild` might not be sufficient. In such situations, `GPRbuild` can still be used to manage the appropriate part of the build. For instance it can be called from within a Makefile. .. _Command_Line: Command Line ============ Three elements can optionally be specified on GPRbuild's command line: * the main project file, * the switches for GPRbuild itself or for the tools it drives, and * the main source files. The general syntax is thus: :: gprbuild [.gpr] [switches] [names] {[-cargs opts] [-cargs:lang opts] [-largs opts] [-kargs opts] [-gargs opts]} GPRbuild requires a project file, which may be specified on the command line either directly or through the :samp:`-P` switch. If not specified, GPRbuild uses the project file :file:`default.gpr` if there is one in the current working directory. Otherwise, if there is only one project file in the current working directory, GPRbuild uses this project file. Main source files represent the sources to be used as the main programs. If they are not specified on the command line, GPRbuild uses the source files specified with the `Main` attribute in the project file. If none exists, then no executable will be built. It is also possible to specify absolute file names, or file names relative to the current directory. When source files are specified along with the option :samp:`-c`, then recompilation will be considered only for those source files. In all other cases, GPRbuild compiles or recompiles all sources in the project tree that are not up to date, and builds or rebuilds libraries that are not up to date. If invoked without the :samp:`--config=` or :samp:`--autoconf=` options, then GPRbuild will look for a configuration project file. The file name or path name of this configuration project file depends on the target, the runtime and environment variable `GPR_CONFIG` See :ref:`Configuring_with_GPRconfig`. If there is no such file in the default locations expected by GPRbuild (/share/gpr and the current directory) then GPRbuild will invoke GPRconfig with the languages from the project files, and create a configuration project file :file:`auto.cgpr` in the object directory of the main project. The project :file:`auto.cgpr` will be rebuilt at each GPRbuild invocation unless you use the switch :samp:`--autoconf=path/auto.cgpr`, which will use the configuration project file if it exists and create it otherwise. Options given on the GPRbuild command line may be passed along to individual tools by preceding them with one of the "command line separators" shown below. Options following the separator, up to the next separator (or end of the command line), are passed along. The different command line separators are: * :samp:`-cargs` The arguments that follow up to the next command line separator are options for all compilers for all languages. Example: :samp:`-cargs` :samp:`-g` * :samp:`-cargs:{language name}` The arguments that follow up to the next command line separator are options for the compiler of the specific language. Examples: * :samp:`-cargs:Ada -gnatf` * :samp:`-cargs:C -E` * :samp:`-bargs` The arguments that follow up to the next command line separator are options for all binder drivers. * :samp:`-bargs:{language name}` The arguments that follow up to the next command line separators are options for the binder driver of the specific language. Examples: * :samp:`-bargs:Ada binder_prefix=ppc-elf` * :samp:`-bargs:C++ c_compiler_name=ccppc` * :samp:`-largs` The arguments that follow up to the next command line separator are options for the linker, when linking an executable. * :samp:`-kargs` The arguments that follow up to the next command line separator are options for gprconfig when performing auto-configuration. * :samp:`-gargs` The arguments that follow up to the next command line separator are options for GPRbuild itself. Usually :samp:`-gargs` is specified after one or several other command line separators. * :samp:`-margs` Equivalent to :samp:`-gargs`, provided for compatibility with *gnatmake*. .. _Switches: Switches ======== GPRbuild takes into account switches that may be specified on the command line or in attributes Switches(
) or Default_Switches () in package Builder of the main project. When there are a single main (specified on the command line or in attribute Main in the main project), the switches that are taken into account in package Builder of the main project are Switches (
), if declared, or Switches (), if declared. When there are several mains, if there are sources of the same language, then Switches () is taken into account, if specified. When there are no main specified, if there is only one compiled language (that is a language with a non empty Compiler Driver), then Switches () is taken into account, if specified. The switches that are interpreted directly by GPRbuild are listed below. First, the switches that may be specified only on the command line, but not in package Builder of the main project: * :samp:`--build-script=` This switch is not compatible with :samp:`--distributed=`. When this switch is specified, a shell script is created. Provided that the temporary files created by gprbuild are not deleted, running this script should perform the same build as the invocation of gprbuild, with the same sources. * :samp:`--no-project` This switch cannot be used if a project file is specified on the command line. When this switch is specified, it indicates to gprbuild that the project files in the current directory should not be considered and that the default project file in /share/gpr is to be used. It is usually used with one or several mains specified on the command line. * :samp:`--no-complete-output` Synonym: :samp:`-n`. By default, gprbuild redirects the standard output and the standard error of the compilations to different text files. This allows to inspect the results afterwards, and also ensures that parallel processes do not clobber each other's output. When this switch is specified, these files are not created and individual compilations output directly to common standard streams. * :samp:`--complete-output` This switch is not compatible with :samp:`--distributed=`. When this switch is specified, if a source is up to date and compilation log files exist, their contents are sent to standard output and standard error. This allows to redisplay any warning or info from the last invocation of gprbuild. * :samp:`--distributed[={slave1}[,{slave2}]]` This switch is not compatible with :samp:`--complete-output`, or with :samp:`--build-script=`. Activate the distributed compilation on the listed slaves nodes (IP or name). Or if no slave are specified they are search in `GPR_SLAVES` or `GPR_SLAVES_FILE` environment variables. see :ref:`Distributed_compilation`. * :samp:`--hash={string}` Specify an hash string. This is just a value which is checked against the GPRslave hash value. If GPRslave has a hash value specified this string must match, otherwise it is ignored. For example: :: $ gprbuild --hash=$(echo $ADA_PROJECT_PATH | shasum) --distributed=... * :samp:`--slave-env={name}` Use name as the slave's environment directory instead of the default one. This options is only used in distributed mode. * :samp:`--version` Display information about GPRbuild: version, origin and legal status, then exit successfully, ignoring other options. * :samp:`--help` Display GPRbuild usage, then exit successfully, ignoring other options. * :samp:`--display-paths` Display two lines: the configuration project file search path and the user project file search path, then exit successfully, ignoring other options. * :samp:`--config={config project file name}` This specifies the configuration project file name. By default, the configuration project file name is :file:`default.cgpr`. Option :samp:`--config=` cannot be specified more than once. The configuration project file specified with :samp:`--config=` must exist. * :samp:`--autoconf={config project file name}` This specifies a configuration project file name that already exists or will be created automatically. Option :samp:`--autoconf=` cannot be specified more than once. If the configuration project file specified with :samp:`--autoconf=` exists, then it is used. Otherwise, GPRconfig is invoked to create it automatically. * :samp:`--target={targetname}` This specifies that the default configuration project file is :file:`.cgpr`. If no configuration project file with this name is found, then GPRconfig is invoked with option :samp:`--target={targetname}` to create a configuration project file :file:`auto.cgpr`. Note: only one of :samp:`--config`, :samp:`--autoconf` or :samp:`--target=` can be specified. * :samp:`--implicit-with={project file name}` Adds a given project as an implicit dependency to every project in the build tree by creating an implicit "limited with" clause at the start of each project. This switch can only appear once on the command line. * :samp:`--subdirs={subdir}` This indicates that the object, library and executable directories specified in the project file will be suffixed with {subdir}. If needed, those subdirectories are created except for externally built projects: in this case if the subdirectories already exist they are used, otherwise the base directories are used. * :samp:`--src-subdirs={subdir}` This adds the given subdirectory (relative to each object directory of the project tree) to the list of source directories of the project, one directory per object directory. This is useful for overriding temporarily some source files for the purpose of e.g. source instrumentation such as source coverage or preprocessing. This option may be combined with :samp:`--subdirs`. * :samp:`--relocate-build-tree[={dir}]` With this option it is possible to achieve out-of-tree build. That is, real object, library or exec directories are relocated to the current working directory or dir if specified. * :samp:`--root-dir={dir}` This option is to be used with --relocate-build-tree above and cannot be specified alone. This option specifies the root directory for artifacts for proper relocation. The default value is the main project directory. This may not be suitable for relocation if for example some artifact directories are in parent directory of the main project. The specified directory must be a parent of all artifact directories. * :samp:`--unchecked-shared-lib-imports` Allow shared library projects to import projects that are not shared library projects. * :samp:`--source-info={source info file}` Specify a source info file. If the source info file is specified as a relative path, then it is relative to the object directory of the main project. If the source info file does not exist, then after the Project Manager has successfully parsed and processed the project files and found the sources, it creates the source info file. If the source info file already exists and can be read successfully, then the Project Manager will get all the needed information about the sources from the source info file and will not look for them. This reduces the time to process the project files, especially when looking for sources that take a long time. If the source info file exists but cannot be parsed successfully, the Project Manager will attempt to recreate it. If the Project Manager fails to create the source info file, a message is issued, but GPRbuild does not fail. * :samp:`--restricted-to-languages={list of language names}` Restrict the sources to be compiled to one or several languages. Each language name in the list is separated from the next by a comma, without any space. Example: :samp:`--restricted-to-languages=Ada,C` When this switch is used, switches :samp:`-c`, :samp:`-b` and :samp:`-l` are ignored. Only the compilation phase is performed and the sources that are not in the list of restricted languages are not compiled, including mains specified in package Builder of the main project. * :samp:`--no-sal-binding` Specify to GPRbuild to not rebind a Stand-Alone Library (SAL), but instead to reuse the files created during a previous build of the SAL. GPRbuild will fail if there are missing files. This option is unsafe and not recommended, as it may result in incorrect binding of the SAL, for example if sources have been added, removed or modified in a significant way related to binding. It is only provided to improve performance, when it is known that the resulting binding files will be the same as the previous ones. * :samp:`-aP {dir}` (Add directory :file:`dir` to project search path) Specify to GPRbuild to add directory :file:`dir` to the user project file search path, before the default directory. * :samp:`-d` (Display progress) Display progress for each source, up to date or not, as a single line *completed x out of y (zz%)...*. If the file needs to be compiled this is displayed after the invocation of the compiler. These lines are displayed even in quiet output mode (switch :samp:`-q`). * :samp:`-I{nn}` (Index of main unit in multi-unit source file) Indicate the index of the main unit in a multi-unit source file. The index must be a positive number and there should be one and only one main source file name on the command line. * :samp:`-eL` (Follow symbolic links when processing project files) By default, symbolic links on project files are not taken into account when processing project files. Switch :samp:`-eL` changes this default behavior. * :samp:`-eS` (no effect) This switch is only accepted for compatibility with gnatmake, but it has no effect. For gnatmake, it means: echo commands to standard output instead of standard error, but for gprbuild, commands are always echoed to standard output. * :samp:`-F` (Full project path name in brief error messages) By default, in non verbose mode, when an error occurs while processing a project file, only the simple name of the project file is displayed in the error message. When switch :samp:`-F` is used, the full path of the project file is used. This switch has no effect when switch :samp:`-v` is used. * :samp:`-o {name}` (Choose an alternate executable name) Specify the file name of the executable. Switch :samp:`-o` can be used only if there is exactly one executable being built; that is, there is exactly one main on the command line, or there are no mains on the command line and exactly one main in attribute `Main` of the main project. * :samp:`-P {proj}` (use Project file *proj*) Specify the path name of the main project file. The space between :samp:`-P` and the project file name is optional. Specifying a project file name (with suffix :file:`.gpr`) may be used in place of option :samp:`-P`. Exactly one main project file can be specified. * :samp:`-r` (Recursive) This switch has an effect only when :samp:`-c` or :samp:`-u` is also specified and there are no mains: it means that all sources of all projects need to be compiled or recompiled. * :samp:`-u` (Unique compilation, only compile the given files) If there are sources specified on the command line, only compile these sources. If there are no sources specified on the command line, compile all the sources of the main project. In both cases, do not attempt the binding and the linking phases. * :samp:`-U` (Compile all sources of all projects) If there are sources specified on the command line, only compile these sources. If there are no sources specified on the command line, compile all the sources of all the projects in the project tree. In both cases, do not attempt the binding and the linking phases. * :samp:`-vP{x}` (Specify verbosity when parsing Project Files) By default, GPRbuild does not display anything when processing project files, except when there are errors. This default behavior is obtained with switch :samp:`-vP0`. Switches :samp:`-vP1` and :samp:`-vP2` yield increasingly detailed output. * :samp:`-Xnm={val}` (Specify an external reference for Project Files) Specify an external reference that may be queried inside the project files using built-in function `external`. For example, with :samp:`-XBUILD=DEBUG`, `external("BUILD")` inside a project file will have the value `"DEBUG"`. * :samp:`--compiler-subst={lang},{tool}` (Specify alternative compiler) Use *tool* for compiling files in language *lang*, instead of the normal compiler. For example, if :samp:`--compiler-subst=ada,my-compiler` is given, then Ada files will be compiled with *my-compiler* instead of the usual *gcc*. This and :samp:`--compiler-pkg-subst` are intended primarily for use by ASIS tools using :samp:`--incremental` mode. * :samp:`--compiler-pkg-subst={pkg}` (Specify alternative package) Use the switches in project-file package *pkg* when running the compiler, instead of the ones in package Compiler. Then, the switches that may be specified on the command line as well as in package Builder of the main project (attribute Switches): * :samp:`--keep-temp-files` Normally, GPRbuild delete the temporary files that it creates. When this switch is used, the temporary files that GPRbuild creates are not deleted. * :samp:`--create-map-file` When linking an executable, if supported by the platform, create a map file with the same name as the executable, but with suffix :file:`.map`. * :samp:`--create-map-file={map file}` When linking an executable, if supported by the platform, create a map file with file name :file:`map file`. * :samp:`--no-indirect-imports` This indicates that sources of a project should import only sources or header files from directly imported projects, that is those projects mentioned in a with clause and the projects they extend directly or indirectly. A check is done in the compilation phase, after a successful compilation, that the sources follow these restrictions. For Ada sources, the check is fully enforced. For non Ada sources, the check is partial, as in the dependency file there is no distinction between header files directly included and those indirectly included. The check will fail if there is no possibility that a header file in a non directly imported project could have been indirectly imported. If the check fails, the compilation artifacts (dependency file, object file, switches file) are deleted. * :samp:`--indirect-imports` This indicates that sources of a project can import sources or header files from directly or indirectly imported projects. This is the default behavior. This switch is provided to cancel a previous switch :samp:`--no-indirect-imports` on the command line. * :samp:`--no-object-check` Do not check if an object has been created after compilation. * :samp:`--no-split-units` Forbid the sources of the same Ada unit to be in different projects. * :samp:`--single-compile-per-obj-dir` Disallow several simultaneous compilations for the same object directory. * :samp:`-b` (Bind only) Specify to GPRbuild that the post-compilation (or binding) phase is to be performed, but not the other phases unless they are specified by appropriate switches. * :samp:`-c` (Compile only) Specify to GPRbuild that the compilation phase is to be performed, but not the other phases unless they are specified by appropriate switches. * :samp:`-f` (Force recompilations) Force the complete processing of all phases (or of those explicitly specified) even when up to date. * :samp:`-j{num}` (use *num* simultaneous compilation jobs) By default, GPRbuild invokes one compiler at a time. With switch :samp:`-j`, it is possible to instruct GPRbuild to spawn several simultaneous compilation jobs if needed. For example, :samp:`-j2` for two simultaneous compilation jobs or :samp:`-j4` for four. On a multi-processor system, :samp:`-j{num}` can greatly speed up the build process. If :samp:`-j0` is used, then the maximum number of simultaneous compilation jobs is the number of core processors on the platform. Switch :samp:`-j{num}` is also used to spawned several simultaneous binding processes and several simultaneous linking processes when there are several mains to be bound and/or linked. * :samp:`-k` (Keep going after compilation errors) By default, GPRbuild stops spawning new compilation jobs at the first compilation failure. Using switch :samp:`-k`, it is possible to attempt to compile/recompile all the sources that are not up to date, even when some compilations failed. The post-compilation phase and the linking phase are never attempted if there are compilation failures, even when switch :samp:`-k` is used. * :samp:`-l` (Link only) Specify to GPRbuild that the linking phase is to be performed, but not the other phases unless they are specified by appropriate switches. * :samp:`-m` (Minimum Ada recompilation) Do not recompile Ada code if timestamps are different but checksums are the same. Note that for the case when source code contains preprocessing directives, this switch has no effect. * :samp:`-m2` (Checksum based recompilation) Recompile Ada code even if timestamps are the same, but checksums are different. Note that for the case when source code contains preprocessing directives, this switch has the same effect as -f. * :samp:`-p` or :samp:`--create-missing-dirs` (Create missing object, library and exec directories) By default, GPRbuild checks that the object, library and exec directories specified in project files exist. Switch :samp:`-p` instructs GPRbuild to attempt to create missing directories. Note that these switches may be specified in package Builder of the main project, but they are useless there as either the directories already exist or the processing of the project files has failed before the evaluation of the Builder switches, because there is at least one missing directory. * :samp:`-q` (Quiet output) Do not display anything except errors and progress (switch :samp:`-d`). Cancel any previous switch :samp:`-v`. * :samp:`-R` (no run path option) Do not use a run path option to link executables or shared libraries, even when attribute Run_Path_Option is specified. * :samp:`-s` (recompile if compilation switches have changed) By default, GPRbuild will not recompile a source if all dependencies are satisfied. Switch :samp:`-s` instructs GPRbuild to recompile sources when a different set of compilation switches has been used in the previous compilation, even if all dependencies are satisfied. Each time GPRbuild invokes a compiler, it writes a text file that lists the switches used in the invocation of the compiler, so that it can retrieve these switches if :samp:`-s` is used later. * :samp:`-v` (Verbose output) Same as switch :samp:`-vl`. * :samp:`-vl` (Verbose output, low level) Display full paths, all options used in spawned processes, as well as creations of missing directories and changes of current working directories. * :samp:`-vm` (Verbose output, medium level) Not significantly different from switch :samp:`-vh`. * :samp:`-vh` (Verbose output, high level) In addition to what is displayed with switch :samp:`vl`, displayed internal behavior of gprbuild and reasons why the spawned processes are invoked. * :samp:`-we` (Treat all warnings as errors) When :samp:`-we` is used, any warning during the processing of the project files becomes an error and GPRbuild does not attempt any of the phases. * :samp:`-wn` (Treat warnings as warnings) Switch :samp:`-wn` may be used to restore the default after :samp:`-we` or :samp:`-ws`. * :samp:`-ws` (Suppress all warnings) Do not generate any warnings while processing the project files. Note that this switch is only for warnings generated by gprbuild, not for warnings generated by the compiler. Use the compiler switch :samp:`-gnatws` to suppress warnings generated by the GNAT front end, and the compiler switch :samp:`-w` to suppress warnings generated by the gcc back end. * :samp:`-x` (Create include path file) Create the include path file for the Ada compiler. This switch is often necessary when Ada sources are compiled with switch :samp:`-gnatep=`. Switches that are accepted for compatibility with gnatmake, either on the command line or in the Builder Ada switches in the main project file: * :samp:`-nostdinc` * :samp:`-nostdlib` * :samp:`-fstack-check` * :samp:`-fno-inline` * :samp:`-g{*}` Any switch starting with :samp:`-g` * :samp:`-O{*}` Any switch starting with :samp:`-O` These switches are passed to the Ada compiler. .. _Initialization: Initialization ============== Before performing one or several of its three phases, GPRbuild has to read the command line, obtain its configuration, and process the project files. If GPRbuild is invoked with an invalid switch or without any project file on the command line, it will fail immediately. Examples: :: $ gprbuild -P gprbuild: project file name missing after -P $ gprbuild -P c_main.gpr -WW gprbuild: illegal option "-WW" GPRbuild looks for the configuration project file first in the current working directory, then in the default configuration project directory. If the GPRbuild executable is located in a subdirectory :file:`/bin`, then the default configuration project directory is :file:`/share/gpr`, otherwise there is no default configuration project directory. When it has found its configuration project path, GPRbuild needs to obtain its configuration. By default, the file name of the main configuration project is :file:`default.cgpr`. This default may be modified using the switch :samp:`--config=...` Example: :: $ gprbuild --config=my_standard.cgpr -P my_project.gpr If GPRbuild cannot find the main configuration project on the configuration project path, then it will look for all the languages specified in the user project tree and invoke GPRconfig to create a temporary configuration project file. This file is located in the directory computed by the following sequence: * Look for a valid absolute path in the environment variables TMPDIR, TEMP, and TMP. * If this fails, check some predefined platform-specific temp dirs (e.g. /tmp for linux). * Finally if none is accessible we fall back onto the current working directory. The invocation of GPRconfig will take into account the target, if specified either by switch --target= on the command line or by attribute Target in the main project. Also, if Ada is one of the languages, it will take into account the Ada runtime directory, specified either by switches --RTS= or --RTS:ada= on the command line or by attribute Runtime ("Ada") in the main project file. If the Ada runtime is specified as a relative path, gprbuild will try to locate the Ada runtime directory as a subdirectory of the main project directory, or if environment variable GPR_RUNTIME_PATH is defined in the path specified by GPR_RUNTIME_PATH. Once it has found the configuration project, GPRbuild will process its configuration: if a single string attribute is specified in the configuration project and is not specified in a user project, then the attribute is added to the user project. If a string list attribute is specified in the configuration project then its value is prepended to the corresponding attribute in the user project. After GPRbuild has processed its configuration, it will process the user project file or files. If these user project files are incorrect then GPRbuild will fail with the appropriate error messages: :: $ gprbuild -P my_project.gpr ada_main.gpr:3:26: "src" is not a valid directory gprbuild: "my_project.gpr" processing failed Once the user project files have been dealt with successfully, GPRbuild will start its processing. .. _Compilation_of_one_or_several_sources: Compilation of one or several sources ===================================== If GPRbuild is invoked with :samp:`-u` or :samp:`-U` and there are one or several source file names specified on the command line, GPRbuild will compile or recompile these sources, if they are not up to date or if :samp:`-f` is also specified. Then GPRbuild will stop its execution. The options/switches used to compile these sources are described in section :ref:`Compilation_Phase`. If GPRbuild is invoked with :samp:`-u` and no source file name is specified on the command line, GPRbuild will compile or recompile all the sources of the *main* project and then stop. In contrast, if GPRbuild is invoked with :samp:`-U`, and again no source file name is specified on the command line, GPRbuild will compile or recompile all the sources of *all the projects in the project tree* and then stop. .. _Compilation_Phase: Compilation Phase ================= When switch :samp:`-c` is used or when switches :samp:`-b` or :samp:`-l` are not used, GPRbuild will first compile or recompile the sources that are not up to date in all the projects in the project tree. The sources considered are: * all the sources in languages other than Ada * if there are no main specified, all the Ada sources * if there is a non Ada main, but no attribute `Roots` specified for this main, all the Ada sources * if there is a main with an attribute `Roots` specified, all the Ada sources in the closures of these Roots. * if there is an Ada main specified, all the Ada sources in the closure of the main Attribute Roots takes as an index a main and a string list value. Each string in the list is the name of an Ada library unit. Example: :: for Roots ("main.c") use ("pkga", "pkgb"); Package PkgA and PkgB will be considered, and all the Ada units in their closure will also be considered. GPRbuild will first consider each source and decide if it needs to be (re)compiled. A source needs to be compiled in the following cases: * Switch :samp:`-f` (force recompilations) is used * The object file does not exist * The source is more recent than the object file * The dependency file does not exist * The source is more recent than the dependency file * When :samp:`-s` is used: the switch file does not exist * When :samp:`-s` is used: the source is more recent than the switch file * The dependency file cannot be read * The dependency file is empty * The dependency file has a wrong format * A source listed in the dependency file does not exist * A source listed in the dependency file has an incompatible time stamp * A source listed in the dependency file has been replaced * Switch :samp:`-s` is used and the source has been compiled with different switches or with the same switches in a different order When a source is successfully compiled, the following files are normally created in the object directory of the project of the source: * An object file * A dependency file, except when the dependency kind for the language is `none` * A switch file if switch :samp:`-s` is used The compiler for the language corresponding to the source file name is invoked with the following switches/options: * The required compilation switches for the language * The compilation switches coming from package `Compiler` of the project of the source * The compilation switches specified on the command line for all compilers, after :samp:`-cargs` * The compilation switches for the language of the source, specified after :samp:`-cargs:{language}` * Various other options including a switch to create the dependency file while compiling, a switch to specify a configuration file, a switch to specify a mapping file, and switches to indicate where to look for other source or header files that are needed to compile the source. If compilation is needed, then all the options/switches, except those described as 'Various other options' are written to the switch file. The switch file is a text file. Its file name is obtained by replacing the suffix of the source with :file:`.cswi`. For example, the switch file for source :file:`main.adb` is :file:`main.cswi` and for :file:`toto.c` it is :file:`toto.cswi`. If the compilation is successful, then if the creation of the dependency file is not done during compilation but after (see configuration attribute `Compute_Dependency`), then the process to create the dependency file is invoked. If GPRbuild is invoked with a switch :samp:`-j` specifying more than one compilation process, then several compilation processes for several sources of possibly different languages are spawned concurrently. For each project file, attribute Interfaces may be declared. Its value is a list of sources or header files of the project file. For a project file extending another one, directly or indirectly, inherited sources may be in the list. When Interfaces is not declared, all sources or header files are part of the interface of the project. When Interfaces is declared, only those sources or header files are part of the interface of the project file. After a successful compilation, gprbuild checks that all imported or included sources or header files that are from an imported project are part of the interface of the imported project. If this check fails, the compilation is invalidated and the compilation artifacts (dependency, object and switches files) are deleted. Example: :: project Prj is for Languages use ("Ada", "C"); for Interfaces use ("pkg.ads", "toto.h"); end Prj; If a source from a project importing project Prj imports sources from Prj other than package Pkg or includes header files from Prj other than "toto.h", then its compilation will be invalidated. .. _Post-Compilation_Phase: Post-Compilation Phase ====================== The post-compilation phase has two parts: library building and program binding. If there are libraries that need to be built or rebuilt, *gprbuild* will call the library builder, specified by attribute `Library_Builder`. This is generally the tool *gprlib*, provided with GPRbuild. If gprbuild can determine that a library is already up to date, then the library builder will not be called. If there are mains specified, and for these mains there are sources of languages with a binder driver (specified by attribute Binder'Driver (), then the binder driver is called for each such main, but only if it needs to. For Ada, the binder driver is normally *gprbind*, which will call the appropriate version of *gnatbind*, that either the one in the same directory as the Ada compiler or the fist one found on the path. When neither of those is appropriate, it is possible to specify to *gprbind* the full path of *gnatbind*, using the Binder switch `--gnatbind_path=`. Example: :: package Binder is for Switches ("Ada") use ("--gnatbind_path=/toto/gnatbind"); end Binder; If GPRbuild can determine that the artifacts from a previous post-compilation phase are already up to date, the binder driver is not called. If there are no libraries and no binder drivers, then the post-compilation phase is empty. .. _Linking_Phase: Linking Phase ============= When there are mains specified, either in attribute Main or on the command line, and these mains are not up to date, the linker is invoked for each main, with all the specified or implied options, including the object files generated during the post-compilation phase by the binder drivers. If switch :samp:`-j{nnn}` is used, with `nnn` other than 1, gprbuild will attempt to link simultaneously up to `nnn` executables. .. _Distributed_compilation: Distributed compilation ======================= .. _Introduction_to_distributed_compilation: Introduction to distributed compilation --------------------------------------- For large projects the compilation time can become a limitation in the development cycle. To cope with that, GPRbuild supports distributed compilation. In the distributed mode, the local machine (called the build master) compiles locally but also sends compilation requests to remote machines (called the build slaves). The compilation process can use one or more build slaves. Once the compilation phase is done, the build master will conduct the binding and linking phases locally. .. _Setup_build_environments: Setup build environments ------------------------ The configuration process to be able to use the distributed compilation support is the following: * Optionally add a Remote package in the main project file This Remote package is to be placed into the project file that is passed to GPRbuild to build the application. The Root_Dir default value is the project's directory. This attribute designates the sources root directory. That is, the directory from which all the sources are to be found to build the application. If the project passed to GPRbuild to build the application is not at the top-level directory but in a direct sub-directory the Remote package should be: .. code-block:: gpr package Remote is for Root_Dir use ".."; end Remote; * Launch a slave driver on each build slave The build master will communicate with each build slave with a specific driver in charge of running the compilation process and returning statuses. This driver is *gprslave*, :ref:`GPRslave`. The requirement for the slaves are: * The same build environment must be setup (same compiler version). * The same libraries must be installed. That is, if the GNAT project makes use of external libraries the corresponding C headers or Ada units must be installed on the remote slaves. When all the requirement are set, just launch the slave driver: :: $ gprslave When all this is done, the remote compilation can be used simply by running GPRbuild in distributed mode from the build master: :: $ gprbuild --distributed=comp1.xyz.com,comp2.xyz.com prj.gpr Alternatively the slaves can be set using the `GPR_SLAVES` environment variable. So the following command is equivalent to the above: :: $ export GPR_SLAVES=comp1.xyz.com,comp2.xyz.com $ gprbuild --distributed prj.gpr A third alternative is proposed using a list of slaves in a file (one per line). In this case the `GPR_SLAVES_FILE` environment variable must contain the path name to this file: :: $ export GPR_SLAVES_FILE=$HOME/slave-list.txt $ gprbuild --distributed prj.gpr Finally note that the search for the slaves are in this specific order. First the command line values, then `GPR_SLAVES` if set and finally `GPR_SLAVES_FILES`. The build slaves are specified with the following form: :: [:port] .. _GPRslave: GPRslave -------- This is the slave driver in charge of running the compilation jobs as requested by the build master. One instance of this tool must be launched in each build slave referenced in the project file. Compilations for a specific project are conducted under a sub-directory from where the slave is launched by default. This can be overridden with the `-d` option below. The current options are: * :samp:`-v, --verbose` Activate the verbose mode * :samp:`-vv`, :samp:`--debug` Activate the debug mode (very verbose) * :samp:`-h`, :samp:`--help` Display the usage * :samp:`-d`, :samp:`--directory=` Set the work directory for the slave. This is where the sources will be copied and where the compilation will take place. A sub-directory will be created for each root project built. * :samp:`-s`, :samp:`--hash={string}` Specify an hash string. This is just a value which is checked against the GPRbuild hash value. If set, GPRbuild hash value must match, otherwise the connection with the slave is aborted. For example: :: $ gprslave --hash=$(echo $ADA_PROJECT_PATH | shasum) * :samp:`-j{N}`, :samp:`--jobs={N}` Set the maximum simultaneous compilation. The default for `N` is the number of cores. * :samp:`-p`, :samp:`--port={N}` Set the port the slave will listen to. The default value is 8484. The same port must be specified for the build slaves on `GPRbuild` command line. * :samp:`-r`, :samp:`--response-handler={N}` Set maximum number of simultaneous responses. With this option it is possible to control the number of simultaneous responses (sending back object code and ALI files) supported. The value must be between 1 and the maximum number of simultaneous compilations. Note that a slave can be pinged to see if it is running and in response a set of information are delivered. The ping command has the following format: :: PG When and are 32bits binary values for the PG string command. As an example here is how to send a ping command from a UNIX shell using the echo command: :: echo -e "\x01\x00\x00\x00\x02\x00\x00\x00PG" | nc 8484 The answer from the ping command has the following format: :: OK[ASCII.GS][ASCII.GS] The ASCII.GS is the Group Separator character whose code is 29.