.. role:: switch(samp) .. _Implementation_Defined_Pragmas: ****************************** Implementation Defined Pragmas ****************************** Ada defines a set of pragmas that can be used to supply additional information to the compiler. These language defined pragmas are implemented in GNAT and work as described in the Ada Reference Manual. In addition, Ada allows implementations to define additional pragmas whose meaning is defined by the implementation. GNAT provides a number of these implementation-defined pragmas, which can be used to extend and enhance the functionality of the compiler. This section of the GNAT Reference Manual describes these additional pragmas. Note that any program using these pragmas might not be portable to other compilers (although GNAT implements this set of pragmas on all platforms). Therefore if portability to other compilers is an important consideration, the use of these pragmas should be minimized. Pragma Abort_Defer ================== .. index:: Deferring aborts Syntax: .. code-block:: ada pragma Abort_Defer; This pragma must appear at the start of the statement sequence of a handled sequence of statements (right after the ``begin``). It has the effect of deferring aborts for the sequence of statements (but not for the declarations or handlers, if any, associated with this statement sequence). This can also be useful for adding a polling point in Ada code, where asynchronous abort of tasks is checked when leaving the statement sequence, and is lighter than, for example, using ``delay 0.0;``, since with zero-cost exception handling, propagating exceptions (implicitly used to implement task abort) cannot be done reliably in an asynchronous way. An example of usage would be: .. code-block:: ada -- Add a polling point to check for task aborts begin pragma Abort_Defer; end; .. _Pragma-Abstract_State: Pragma Abstract_State ===================== Syntax: .. code-block:: ada pragma Abstract_State (ABSTRACT_STATE_LIST); ABSTRACT_STATE_LIST ::= null | STATE_NAME_WITH_OPTIONS | (STATE_NAME_WITH_OPTIONS {, STATE_NAME_WITH_OPTIONS} ) STATE_NAME_WITH_OPTIONS ::= STATE_NAME | (STATE_NAME with OPTION_LIST) OPTION_LIST ::= OPTION {, OPTION} OPTION ::= SIMPLE_OPTION | NAME_VALUE_OPTION SIMPLE_OPTION ::= Ghost | Synchronous NAME_VALUE_OPTION ::= Part_Of => ABSTRACT_STATE | External [=> EXTERNAL_PROPERTY_LIST] EXTERNAL_PROPERTY_LIST ::= EXTERNAL_PROPERTY | (EXTERNAL_PROPERTY {, EXTERNAL_PROPERTY} ) EXTERNAL_PROPERTY ::= Async_Readers [=> static_boolean_EXPRESSION] | Async_Writers [=> static_boolean_EXPRESSION] | Effective_Reads [=> static_boolean_EXPRESSION] | Effective_Writes [=> static_boolean_EXPRESSION] others => static_boolean_EXPRESSION STATE_NAME ::= defining_identifier ABSTRACT_STATE ::= name For the semantics of this pragma, see the entry for aspect ``Abstract_State`` in the SPARK 2014 Reference Manual, section 7.1.4. Pragma Ada_83 ============= Syntax: .. code-block:: ada pragma Ada_83; A configuration pragma that establishes Ada 83 mode for the unit to which it applies, regardless of the mode set by the command line switches. In Ada 83 mode, GNAT attempts to be as compatible with the syntax and semantics of Ada 83, as defined in the original Ada 83 Reference Manual as possible. In particular, the keywords added by Ada 95 and Ada 2005 are not recognized, optional package bodies are allowed, and generics may name types with unknown discriminants without using the ``(<>)`` notation. In addition, some but not all of the additional restrictions of Ada 83 are enforced. Ada 83 mode is intended for two purposes. Firstly, it allows existing Ada 83 code to be compiled and adapted to GNAT with less effort. Secondly, it aids in keeping code backwards compatible with Ada 83. However, there is no guarantee that code that is processed correctly by GNAT in Ada 83 mode will in fact compile and execute with an Ada 83 compiler, since GNAT does not enforce all the additional checks required by Ada 83. Pragma Ada_95 ============= Syntax: .. code-block:: ada pragma Ada_95; A configuration pragma that establishes Ada 95 mode for the unit to which it applies, regardless of the mode set by the command line switches. This mode is set automatically for the ``Ada`` and ``System`` packages and their children, so you need not specify it in these contexts. This pragma is useful when writing a reusable component that itself uses Ada 95 features, but which is intended to be usable from either Ada 83 or Ada 95 programs. Pragma Ada_05 ============= Syntax: .. code-block:: ada pragma Ada_05; pragma Ada_05 (local_NAME); A configuration pragma that establishes Ada 2005 mode for the unit to which it applies, regardless of the mode set by the command line switches. This pragma is useful when writing a reusable component that itself uses Ada 2005 features, but which is intended to be usable from either Ada 83 or Ada 95 programs. The one argument form (which is not a configuration pragma) is used for managing the transition from Ada 95 to Ada 2005 in the run-time library. If an entity is marked as Ada_2005 only, then referencing the entity in Ada_83 or Ada_95 mode will generate a warning. In addition, in Ada_83 or Ada_95 mode, a preference rule is established which does not choose such an entity unless it is unambiguously specified. This avoids extra subprograms marked this way from generating ambiguities in otherwise legal pre-Ada_2005 programs. The one argument form is intended for exclusive use in the GNAT run-time library. Pragma Ada_2005 =============== Syntax: .. code-block:: ada pragma Ada_2005; This configuration pragma is a synonym for pragma Ada_05 and has the same syntax and effect. Pragma Ada_12 ============= Syntax: .. code-block:: ada pragma Ada_12; pragma Ada_12 (local_NAME); A configuration pragma that establishes Ada 2012 mode for the unit to which it applies, regardless of the mode set by the command line switches. This mode is set automatically for the ``Ada`` and ``System`` packages and their children, so you need not specify it in these contexts. This pragma is useful when writing a reusable component that itself uses Ada 2012 features, but which is intended to be usable from Ada 83, Ada 95, or Ada 2005 programs. The one argument form, which is not a configuration pragma, is used for managing the transition from Ada 2005 to Ada 2012 in the run-time library. If an entity is marked as Ada_2012 only, then referencing the entity in any pre-Ada_2012 mode will generate a warning. In addition, in any pre-Ada_2012 mode, a preference rule is established which does not choose such an entity unless it is unambiguously specified. This avoids extra subprograms marked this way from generating ambiguities in otherwise legal pre-Ada_2012 programs. The one argument form is intended for exclusive use in the GNAT run-time library. Pragma Ada_2012 =============== Syntax: .. code-block:: ada pragma Ada_2012; This configuration pragma is a synonym for pragma Ada_12 and has the same syntax and effect. Pragma Ada_2022 =============== Syntax: .. code-block:: ada pragma Ada_2022; pragma Ada_2022 (local_NAME); A configuration pragma that establishes Ada 2022 mode for the unit to which it applies, regardless of the mode set by the command line switches. This mode is set automatically for the ``Ada`` and ``System`` packages and their children, so you need not specify it in these contexts. This pragma is useful when writing a reusable component that itself uses Ada 2022 features, but which is intended to be usable from Ada 83, Ada 95, Ada 2005 or Ada 2012 programs. The one argument form, which is not a configuration pragma, is used for managing the transition from Ada 2012 to Ada 2022 in the run-time library. If an entity is marked as Ada_2022 only, then referencing the entity in any pre-Ada_2022 mode will generate a warning. In addition, in any pre-Ada_2012 mode, a preference rule is established which does not choose such an entity unless it is unambiguously specified. This avoids extra subprograms marked this way from generating ambiguities in otherwise legal pre-Ada_2022 programs. The one argument form is intended for exclusive use in the GNAT run-time library. Pragma Aggregate_Individually_Assign ==================================== Syntax: .. code-block:: ada pragma Aggregate_Individually_Assign; Where possible, GNAT will store the binary representation of a record aggregate in memory for space and performance reasons. This configuration pragma changes this behavior so that record aggregates are instead always converted into individual assignment statements. Pragma Allow_Integer_Address ============================ Syntax: .. code-block:: ada pragma Allow_Integer_Address; In almost all versions of GNAT, ``System.Address`` is a private type in accordance with the implementation advice in the RM. This means that integer values, in particular integer literals, are not allowed as address values. If the configuration pragma ``Allow_Integer_Address`` is given, then integer expressions may be used anywhere a value of type ``System.Address`` is required. The effect is to introduce an implicit unchecked conversion from the integer value to type ``System.Address``. The reverse case of using an address where an integer type is required is handled analogously. The following example compiles without errors: .. code-block:: ada pragma Allow_Integer_Address; with System; use System; package AddrAsInt is X : Integer; Y : Integer; for X'Address use 16#1240#; for Y use at 16#3230#; m : Address := 16#4000#; n : constant Address := 4000; p : constant Address := Address (X + Y); v : Integer := y'Address; w : constant Integer := Integer (Y'Address); type R is new integer; RR : R := 1000; Z : Integer; for Z'Address use RR; end AddrAsInt; Note that pragma ``Allow_Integer_Address`` is ignored if ``System.Address`` is not a private type. In implementations of ``GNAT`` where System.Address is a visible integer type, this pragma serves no purpose but is ignored rather than rejected to allow common sets of sources to be used in the two situations. .. _Pragma-Always_Terminates: Pragma Always_Terminates ======================== Syntax: .. code-block:: ada pragma Always_Terminates [ (boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Always_Terminates`` in the SPARK 2014 Reference Manual, section 6.1.10. .. _Pragma-Annotate: Pragma Annotate =============== Syntax:: pragma Annotate (IDENTIFIER [, IDENTIFIER {, ARG}] [, entity => local_NAME]); ARG ::= NAME | EXPRESSION This pragma is used to annotate programs. IDENTIFIER identifies the type of annotation. GNAT verifies that it is an identifier, but does not otherwise analyze it. The second optional identifier is also left unanalyzed, and by convention is used to control the action of the tool to which the annotation is addressed. The remaining ARG arguments can be either string literals or more generally expressions. String literals (and concatenations of string literals) are assumed to be either of type ``Standard.String`` or else ``Wide_String`` or ``Wide_Wide_String`` depending on the character literals they contain. All other kinds of arguments are analyzed as expressions, and must be unambiguous. The last argument if present must have the identifier ``Entity`` and GNAT verifies that a local name is given. The analyzed pragma is retained in the tree, but not otherwise processed by any part of the GNAT compiler, except to generate corresponding note lines in the generated ALI file. For the format of these note lines, see the compiler source file lib-writ.ads. This pragma is intended for use by external tools, including ASIS. The use of pragma Annotate does not affect the compilation process in any way. This pragma may be used as a configuration pragma. Pragma Assert ============= Syntax:: pragma Assert ( boolean_EXPRESSION [, string_EXPRESSION]); The effect of this pragma depends on whether the corresponding command line switch is set to activate assertions. The pragma expands into code equivalent to the following: .. code-block:: ada if assertions-enabled then if not boolean_EXPRESSION then System.Assertions.Raise_Assert_Failure (string_EXPRESSION); end if; end if; The string argument, if given, is the message that will be associated with the exception occurrence if the exception is raised. If no second argument is given, the default message is ``file``:``nnn``, where ``file`` is the name of the source file containing the assert, and ``nnn`` is the line number of the assert. Note that, as with the ``if`` statement to which it is equivalent, the type of the expression is either ``Standard.Boolean``, or any type derived from this standard type. Assert checks can be either checked or ignored. By default they are ignored. They will be checked if either the command line switch *-gnata* is used, or if an ``Assertion_Policy`` or ``Check_Policy`` pragma is used to enable ``Assert_Checks``. If assertions are ignored, then there is no run-time effect (and in particular, any side effects from the expression will not occur at run time). (The expression is still analyzed at compile time, and may cause types to be frozen if they are mentioned here for the first time). If assertions are checked, then the given expression is tested, and if it is ``False`` then ``System.Assertions.Raise_Assert_Failure`` is called which results in the raising of ``Assert_Failure`` with the given message. You should generally avoid side effects in the expression arguments of this pragma, because these side effects will turn on and off with the setting of the assertions mode, resulting in assertions that have an effect on the program. However, the expressions are analyzed for semantic correctness whether or not assertions are enabled, so turning assertions on and off cannot affect the legality of a program. Note that the implementation defined policy ``DISABLE``, given in a pragma ``Assertion_Policy``, can be used to suppress this semantic analysis. Note: this is a standard language-defined pragma in versions of Ada from 2005 on. In GNAT, it is implemented in all versions of Ada, and the DISABLE policy is an implementation-defined addition. Pragma Assert_And_Cut ===================== Syntax:: pragma Assert_And_Cut ( boolean_EXPRESSION [, string_EXPRESSION]); The effect of this pragma is identical to that of pragma ``Assert``, except that in an ``Assertion_Policy`` pragma, the identifier ``Assert_And_Cut`` is used to control whether it is ignored or checked (or disabled). The intention is that this be used within a subprogram when the given test expresion sums up all the work done so far in the subprogram, so that the rest of the subprogram can be verified (informally or formally) using only the entry preconditions, and the expression in this pragma. This allows dividing up a subprogram into sections for the purposes of testing or formal verification. The pragma also serves as useful documentation. Pragma Assertion_Policy ======================= Syntax:: pragma Assertion_Policy (CHECK | DISABLE | IGNORE | SUPPRESSIBLE); pragma Assertion_Policy ( ASSERTION_KIND => POLICY_IDENTIFIER {, ASSERTION_KIND => POLICY_IDENTIFIER}); ASSERTION_KIND ::= RM_ASSERTION_KIND | ID_ASSERTION_KIND RM_ASSERTION_KIND ::= Assert | Static_Predicate | Dynamic_Predicate | Pre | Pre'Class | Post | Post'Class | Type_Invariant | Type_Invariant'Class | Default_Initial_Condition ID_ASSERTION_KIND ::= Assertions | Assert_And_Cut | Assume | Contract_Cases | Debug | Ghost | Initial_Condition | Invariant | Invariant'Class | Loop_Invariant | Loop_Variant | Postcondition | Precondition | Predicate | Refined_Post | Statement_Assertions | Subprogram_Variant POLICY_IDENTIFIER ::= Check | Disable | Ignore | Suppressible This is a standard Ada 2012 pragma that is available as an implementation-defined pragma in earlier versions of Ada. The assertion kinds ``RM_ASSERTION_KIND`` are those defined in the Ada standard. The assertion kinds ``ID_ASSERTION_KIND`` are implementation defined additions recognized by the GNAT compiler. The pragma applies in both cases to pragmas and aspects with matching names, e.g. ``Pre`` applies to the Pre aspect, and ``Precondition`` applies to both the ``Precondition`` pragma and the aspect ``Precondition``. Note that the identifiers for pragmas Pre_Class and Post_Class are Pre'Class and Post'Class (not Pre_Class and Post_Class), since these pragmas are intended to be identical to the corresponding aspects. If the policy is ``CHECK``, then assertions are enabled, i.e. the corresponding pragma or aspect is activated. If the policy is ``IGNORE``, then assertions are ignored, i.e. the corresponding pragma or aspect is deactivated. This pragma overrides the effect of the *-gnata* switch on the command line. If the policy is ``SUPPRESSIBLE``, then assertions are enabled by default, however, if the *-gnatp* switch is specified all assertions are ignored. The implementation defined policy ``DISABLE`` is like ``IGNORE`` except that it completely disables semantic checking of the corresponding pragma or aspect. This is useful when the pragma or aspect argument references subprograms in a with'ed package which is replaced by a dummy package for the final build. The implementation defined assertion kind ``Assertions`` applies to all assertion kinds. The form with no assertion kind given implies this choice, so it applies to all assertion kinds (RM defined, and implementation defined). The implementation defined assertion kind ``Statement_Assertions`` applies to ``Assert``, ``Assert_And_Cut``, ``Assume``, ``Loop_Invariant``, and ``Loop_Variant``. Pragma Assume ============= Syntax: :: pragma Assume ( boolean_EXPRESSION [, string_EXPRESSION]); The effect of this pragma is identical to that of pragma ``Assert``, except that in an ``Assertion_Policy`` pragma, the identifier ``Assume`` is used to control whether it is ignored or checked (or disabled). The intention is that this be used for assumptions about the external environment. So you cannot expect to verify formally or informally that the condition is met, this must be established by examining things outside the program itself. For example, we may have code that depends on the size of ``Long_Long_Integer`` being at least 64. So we could write: .. code-block:: ada pragma Assume (Long_Long_Integer'Size >= 64); This assumption cannot be proved from the program itself, but it acts as a useful run-time check that the assumption is met, and documents the need to ensure that it is met by reference to information outside the program. Pragma Assume_No_Invalid_Values =============================== .. index:: Invalid representations .. index:: Invalid values Syntax: .. code-block:: ada pragma Assume_No_Invalid_Values (On | Off); This is a configuration pragma that controls the assumptions made by the compiler about the occurrence of invalid representations (invalid values) in the code. The default behavior (corresponding to an Off argument for this pragma), is to assume that values may in general be invalid unless the compiler can prove they are valid. Consider the following example: .. code-block:: ada V1 : Integer range 1 .. 10; V2 : Integer range 11 .. 20; ... for J in V2 .. V1 loop ... end loop; if V1 and V2 have valid values, then the loop is known at compile time not to execute since the lower bound must be greater than the upper bound. However in default mode, no such assumption is made, and the loop may execute. If ``Assume_No_Invalid_Values (On)`` is given, the compiler will assume that any occurrence of a variable other than in an explicit ``'Valid`` test always has a valid value, and the loop above will be optimized away. The use of ``Assume_No_Invalid_Values (On)`` is appropriate if you know your code is free of uninitialized variables and other possible sources of invalid representations, and may result in more efficient code. A program that accesses an invalid representation with this pragma in effect is erroneous, so no guarantees can be made about its behavior. It is peculiar though permissible to use this pragma in conjunction with validity checking (-gnatVa). In such cases, accessing invalid values will generally give an exception, though formally the program is erroneous so there are no guarantees that this will always be the case, and it is recommended that these two options not be used together. .. _Pragma-Async_Readers: Pragma Async_Readers ==================== Syntax: .. code-block:: ada pragma Async_Readers [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Async_Readers`` in the SPARK 2014 Reference Manual, section 7.1.2. .. _Pragma-Async_Writers: Pragma Async_Writers ==================== Syntax: .. code-block:: ada pragma Async_Writers [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Async_Writers`` in the SPARK 2014 Reference Manual, section 7.1.2. Pragma Attribute_Definition =========================== Syntax: :: pragma Attribute_Definition ([Attribute =>] ATTRIBUTE_DESIGNATOR, [Entity =>] LOCAL_NAME, [Expression =>] EXPRESSION | NAME); If ``Attribute`` is a known attribute name, this pragma is equivalent to the attribute definition clause: .. code-block:: ada for Entity'Attribute use Expression; If ``Attribute`` is not a recognized attribute name, the pragma is ignored, and a warning is emitted. This allows source code to be written that takes advantage of some new attribute, while remaining compilable with earlier compilers. Pragma C_Pass_By_Copy ===================== .. index:: Passing by copy Syntax: :: pragma C_Pass_By_Copy ([Max_Size =>] static_integer_EXPRESSION); Normally the default mechanism for passing C convention records to C convention subprograms is to pass them by reference, as suggested by RM B.3(69). Use the configuration pragma ``C_Pass_By_Copy`` to change this default, by requiring that record formal parameters be passed by copy if all of the following conditions are met: * The size of the record type does not exceed the value specified for ``Max_Size``. * The record type has ``Convention C``. * The formal parameter has this record type, and the subprogram has a foreign (non-Ada) convention. If these conditions are met the argument is passed by copy; i.e., in a manner consistent with what C expects if the corresponding formal in the C prototype is a struct (rather than a pointer to a struct). You can also pass records by copy by specifying the convention ``C_Pass_By_Copy`` for the record type, or by using the extended ``Import`` and ``Export`` pragmas, which allow specification of passing mechanisms on a parameter by parameter basis. Pragma Check ============ .. index:: Assertions .. index:: Named assertions Syntax: :: pragma Check ( [Name =>] CHECK_KIND, [Check =>] Boolean_EXPRESSION [, [Message =>] string_EXPRESSION] ); CHECK_KIND ::= IDENTIFIER | Pre'Class | Post'Class | Type_Invariant'Class | Invariant'Class This pragma is similar to the predefined pragma ``Assert`` except that an extra identifier argument is present. In conjunction with pragma ``Check_Policy``, this can be used to define groups of assertions that can be independently controlled. The identifier ``Assertion`` is special, it refers to the normal set of pragma ``Assert`` statements. Checks introduced by this pragma are normally deactivated by default. They can be activated either by the command line option *-gnata*, which turns on all checks, or individually controlled using pragma ``Check_Policy``. The identifiers ``Assertions`` and ``Statement_Assertions`` are not permitted as check kinds, since this would cause confusion with the use of these identifiers in ``Assertion_Policy`` and ``Check_Policy`` pragmas, where they are used to refer to sets of assertions. Pragma Check_Float_Overflow =========================== .. index:: Floating-point overflow Syntax: .. code-block:: ada pragma Check_Float_Overflow; In Ada, the predefined floating-point types (``Short_Float``, ``Float``, ``Long_Float``, ``Long_Long_Float``) are defined to be *unconstrained*. This means that even though each has a well-defined base range, an operation that delivers a result outside this base range is not required to raise an exception. This implementation permission accommodates the notion of infinities in IEEE floating-point, and corresponds to the efficient execution mode on most machines. GNAT will not raise overflow exceptions on these machines; instead it will generate infinities and NaN's as defined in the IEEE standard. Generating infinities, although efficient, is not always desirable. Often the preferable approach is to check for overflow, even at the (perhaps considerable) expense of run-time performance. This can be accomplished by defining your own constrained floating-point subtypes -- i.e., by supplying explicit range constraints -- and indeed such a subtype can have the same base range as its base type. For example: .. code-block:: ada subtype My_Float is Float range Float'Range; Here ``My_Float`` has the same range as ``Float`` but is constrained, so operations on ``My_Float`` values will be checked for overflow against this range. This style will achieve the desired goal, but it is often more convenient to be able to simply use the standard predefined floating-point types as long as overflow checking could be guaranteed. The ``Check_Float_Overflow`` configuration pragma achieves this effect. If a unit is compiled subject to this configuration pragma, then all operations on predefined floating-point types including operations on base types of these floating-point types will be treated as though those types were constrained, and overflow checks will be generated. The ``Constraint_Error`` exception is raised if the result is out of range. This mode can also be set by use of the compiler switch *-gnateF*. Pragma Check_Name ================= .. index:: Defining check names .. index:: Check names, defining Syntax: .. code-block:: ada pragma Check_Name (check_name_IDENTIFIER); This is a configuration pragma that defines a new implementation defined check name (unless IDENTIFIER matches one of the predefined check names, in which case the pragma has no effect). Check names are global to a partition, so if two or more configuration pragmas are present in a partition mentioning the same name, only one new check name is introduced. An implementation defined check name introduced with this pragma may be used in only three contexts: ``pragma Suppress``, ``pragma Unsuppress``, and as the prefix of a ``Check_Name'Enabled`` attribute reference. For any of these three cases, the check name must be visible. A check name is visible if it is in the configuration pragmas applying to the current unit, or if it appears at the start of any unit that is part of the dependency set of the current unit (e.g., units that are mentioned in ``with`` clauses). Check names introduced by this pragma are subject to control by compiler switches (in particular -gnatp) in the usual manner. Pragma Check_Policy =================== .. index:: Controlling assertions .. index:: Assertions, control .. index:: Check pragma control .. index:: Named assertions Syntax: :: pragma Check_Policy ([Name =>] CHECK_KIND, [Policy =>] POLICY_IDENTIFIER); pragma Check_Policy ( CHECK_KIND => POLICY_IDENTIFIER {, CHECK_KIND => POLICY_IDENTIFIER}); ASSERTION_KIND ::= RM_ASSERTION_KIND | ID_ASSERTION_KIND CHECK_KIND ::= IDENTIFIER | Pre'Class | Post'Class | Type_Invariant'Class | Invariant'Class The identifiers Name and Policy are not allowed as CHECK_KIND values. This avoids confusion between the two possible syntax forms for this pragma. POLICY_IDENTIFIER ::= ON | OFF | CHECK | DISABLE | IGNORE This pragma is used to set the checking policy for assertions (specified by aspects or pragmas), the ``Debug`` pragma, or additional checks to be checked using the ``Check`` pragma. It may appear either as a configuration pragma, or within a declarative part of package. In the latter case, it applies from the point where it appears to the end of the declarative region (like pragma ``Suppress``). The ``Check_Policy`` pragma is similar to the predefined ``Assertion_Policy`` pragma, and if the check kind corresponds to one of the assertion kinds that are allowed by ``Assertion_Policy``, then the effect is identical. If the first argument is Debug, then the policy applies to Debug pragmas, disabling their effect if the policy is ``OFF``, ``DISABLE``, or ``IGNORE``, and allowing them to execute with normal semantics if the policy is ``ON`` or ``CHECK``. In addition if the policy is ``DISABLE``, then the procedure call in ``Debug`` pragmas will be totally ignored and not analyzed semantically. Finally the first argument may be some other identifier than the above possibilities, in which case it controls a set of named assertions that can be checked using pragma ``Check``. For example, if the pragma: .. code-block:: ada pragma Check_Policy (Critical_Error, OFF); is given, then subsequent ``Check`` pragmas whose first argument is also ``Critical_Error`` will be disabled. The check policy is ``OFF`` to turn off corresponding checks, and ``ON`` to turn on corresponding checks. The default for a set of checks for which no ``Check_Policy`` is given is ``OFF`` unless the compiler switch *-gnata* is given, which turns on all checks by default. The check policy settings ``CHECK`` and ``IGNORE`` are recognized as synonyms for ``ON`` and ``OFF``. These synonyms are provided for compatibility with the standard ``Assertion_Policy`` pragma. The check policy setting ``DISABLE`` causes the second argument of a corresponding ``Check`` pragma to be completely ignored and not analyzed. Pragma Comment ============== Syntax: .. code-block:: ada pragma Comment (static_string_EXPRESSION); This is almost identical in effect to pragma ``Ident``. It allows the placement of a comment into the object file and hence into the executable file if the operating system permits such usage. The difference is that ``Comment``, unlike ``Ident``, has no limitations on placement of the pragma (it can be placed anywhere in the main source unit), and if more than one pragma is used, all comments are retained. Pragma Common_Object ==================== Syntax: :: pragma Common_Object ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Size =>] EXTERNAL_SYMBOL] ); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION This pragma enables the shared use of variables stored in overlaid linker areas corresponding to the use of ``COMMON`` in Fortran. The single object ``LOCAL_NAME`` is assigned to the area designated by the ``External`` argument. You may define a record to correspond to a series of fields. The ``Size`` argument is syntax checked in GNAT, but otherwise ignored. ``Common_Object`` is not supported on all platforms. If no support is available, then the code generator will issue a message indicating that the necessary attribute for implementation of this pragma is not available. .. _Compile_Time_Error: Pragma Compile_Time_Error ========================= Syntax: .. code-block:: ada pragma Compile_Time_Error (boolean_EXPRESSION, static_string_EXPRESSION); This pragma can be used to generate additional compile time error messages. It is particularly useful in generics, where errors can be issued for specific problematic instantiations. The first parameter is a boolean expression. The pragma ensures that the value of an expression is known at compile time, and has the value False. The set of expressions whose values are known at compile time includes all static boolean expressions, and also other values which the compiler can determine at compile time (e.g., the size of a record type set by an explicit size representation clause, or the value of a variable which was initialized to a constant and is known not to have been modified). If these conditions are not met, an error message is generated using the value given as the second argument. This string value may contain embedded ASCII.LF characters to break the message into multiple lines. Pragma Compile_Time_Warning =========================== Syntax: .. code-block:: ada pragma Compile_Time_Warning (boolean_EXPRESSION, static_string_EXPRESSION); Same as pragma Compile_Time_Error, except a warning is issued instead of an error message. If switch *-gnatw_C* is used, a warning is only issued if the value of the expression is known to be True at compile time, not when the value of the expression is not known at compile time. Note that if this pragma is used in a package that is with'ed by a client, the client will get the warning even though it is issued by a with'ed package (normally warnings in with'ed units are suppressed, but this is a special exception to that rule). One typical use is within a generic where compile time known characteristics of formal parameters are tested, and warnings given appropriately. Another use with a first parameter of True is to warn a client about use of a package, for example that it is not fully implemented. In previous versions of the compiler, combining *-gnatwe* with Compile_Time_Warning resulted in a fatal error. Now the compiler always emits a warning. You can use :ref:`Compile_Time_Error` to force the generation of an error. Pragma Complete_Representation ============================== Syntax: .. code-block:: ada pragma Complete_Representation; This pragma must appear immediately within a record representation clause. Typical placements are before the first component clause or after the last component clause. The effect is to give an error message if any component is missing a component clause. This pragma may be used to ensure that a record representation clause is complete, and that this invariant is maintained if fields are added to the record in the future. Pragma Complex_Representation ============================= Syntax: :: pragma Complex_Representation ([Entity =>] LOCAL_NAME); The ``Entity`` argument must be the name of a record type which has two fields of the same floating-point type. The effect of this pragma is to force gcc to use the special internal complex representation form for this record, which may be more efficient. Note that this may result in the code for this type not conforming to standard ABI (application binary interface) requirements for the handling of record types. For example, in some environments, there is a requirement for passing records by pointer, and the use of this pragma may result in passing this type in floating-point registers. Pragma Component_Alignment ========================== .. index:: Alignments of components .. index:: Pragma Component_Alignment Syntax: :: pragma Component_Alignment ( [Form =>] ALIGNMENT_CHOICE [, [Name =>] type_LOCAL_NAME]); ALIGNMENT_CHOICE ::= Component_Size | Component_Size_4 | Storage_Unit | Default Specifies the alignment of components in array or record types. The meaning of the ``Form`` argument is as follows: .. index:: Component_Size (in pragma Component_Alignment) *Component_Size* Aligns scalar components and subcomponents of the array or record type on boundaries appropriate to their inherent size (naturally aligned). For example, 1-byte components are aligned on byte boundaries, 2-byte integer components are aligned on 2-byte boundaries, 4-byte integer components are aligned on 4-byte boundaries and so on. These alignment rules correspond to the normal rules for C compilers on all machines except the VAX. .. index:: Component_Size_4 (in pragma Component_Alignment) *Component_Size_4* Naturally aligns components with a size of four or fewer bytes. Components that are larger than 4 bytes are placed on the next 4-byte boundary. .. index:: Storage_Unit (in pragma Component_Alignment) *Storage_Unit* Specifies that array or record components are byte aligned, i.e., aligned on boundaries determined by the value of the constant ``System.Storage_Unit``. .. index:: Default (in pragma Component_Alignment) *Default* Specifies that array or record components are aligned on default boundaries, appropriate to the underlying hardware or operating system or both. The ``Default`` choice is the same as ``Component_Size`` (natural alignment). If the ``Name`` parameter is present, ``type_LOCAL_NAME`` must refer to a local record or array type, and the specified alignment choice applies to the specified type. The use of ``Component_Alignment`` together with a pragma ``Pack`` causes the ``Component_Alignment`` pragma to be ignored. The use of ``Component_Alignment`` together with a record representation clause is only effective for fields not specified by the representation clause. If the ``Name`` parameter is absent, the pragma can be used as either a configuration pragma, in which case it applies to one or more units in accordance with the normal rules for configuration pragmas, or it can be used within a declarative part, in which case it applies to types that are declared within this declarative part, or within any nested scope within this declarative part. In either case it specifies the alignment to be applied to any record or array type which has otherwise standard representation. If the alignment for a record or array type is not specified (using pragma ``Pack``, pragma ``Component_Alignment``, or a record rep clause), the GNAT uses the default alignment as described previously. .. _Pragma-Constant_After_Elaboration: Pragma Constant_After_Elaboration ================================= Syntax: .. code-block:: ada pragma Constant_After_Elaboration [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Constant_After_Elaboration`` in the SPARK 2014 Reference Manual, section 3.3.1. .. _Pragma-Contract_Cases: Pragma Contract_Cases ===================== .. index:: Contract cases Syntax: .. code-block:: ada pragma Contract_Cases (CONTRACT_CASE {, CONTRACT_CASE}); CONTRACT_CASE ::= CASE_GUARD => CONSEQUENCE CASE_GUARD ::= boolean_EXPRESSION | others CONSEQUENCE ::= boolean_EXPRESSION The ``Contract_Cases`` pragma allows defining fine-grain specifications that can complement or replace the contract given by a precondition and a postcondition. Additionally, the ``Contract_Cases`` pragma can be used by testing and formal verification tools. The compiler checks its validity and, depending on the assertion policy at the point of declaration of the pragma, it may insert a check in the executable. For code generation, the contract cases .. code-block:: ada pragma Contract_Cases ( Cond1 => Pred1, Cond2 => Pred2); are equivalent to .. code-block:: ada C1 : constant Boolean := Cond1; -- evaluated at subprogram entry C2 : constant Boolean := Cond2; -- evaluated at subprogram entry pragma Precondition ((C1 and not C2) or (C2 and not C1)); pragma Postcondition (if C1 then Pred1); pragma Postcondition (if C2 then Pred2); The precondition ensures that one and only one of the case guards is satisfied on entry to the subprogram. The postcondition ensures that for the case guard that was True on entry, the corresponding consequence is True on exit. Other consequence expressions are not evaluated. A precondition ``P`` and postcondition ``Q`` can also be expressed as contract cases: .. code-block:: ada pragma Contract_Cases (P => Q); The placement and visibility rules for ``Contract_Cases`` pragmas are identical to those described for preconditions and postconditions. The compiler checks that boolean expressions given in case guards and consequences are valid, where the rules for case guards are the same as the rule for an expression in ``Precondition`` and the rules for consequences are the same as the rule for an expression in ``Postcondition``. In particular, attributes ``'Old`` and ``'Result`` can only be used within consequence expressions. The case guard for the last contract case may be ``others``, to denote any case not captured by the previous cases. The following is an example of use within a package spec: .. code-block:: ada package Math_Functions is ... function Sqrt (Arg : Float) return Float; pragma Contract_Cases (((Arg in 0.0 .. 99.0) => Sqrt'Result < 10.0, Arg >= 100.0 => Sqrt'Result >= 10.0, others => Sqrt'Result = 0.0)); ... end Math_Functions; The meaning of contract cases is that only one case should apply at each call, as determined by the corresponding case guard evaluating to True, and that the consequence for this case should hold when the subprogram returns. Pragma Convention_Identifier ============================ .. index:: Conventions, synonyms Syntax: :: pragma Convention_Identifier ( [Name =>] IDENTIFIER, [Convention =>] convention_IDENTIFIER); This pragma provides a mechanism for supplying synonyms for existing convention identifiers. The ``Name`` identifier can subsequently be used as a synonym for the given convention in other pragmas (including for example pragma ``Import`` or another ``Convention_Identifier`` pragma). As an example of the use of this, suppose you had legacy code which used Fortran77 as the identifier for Fortran. Then the pragma: .. code-block:: ada pragma Convention_Identifier (Fortran77, Fortran); would allow the use of the convention identifier ``Fortran77`` in subsequent code, avoiding the need to modify the sources. As another example, you could use this to parameterize convention requirements according to systems. Suppose you needed to use ``Stdcall`` on windows systems, and ``C`` on some other system, then you could define a convention identifier ``Library`` and use a single ``Convention_Identifier`` pragma to specify which convention would be used system-wide. Pragma CPP_Class ================ .. index:: Interfacing with C++ Syntax: :: pragma CPP_Class ([Entity =>] LOCAL_NAME); The argument denotes an entity in the current declarative region that is declared as a record type. It indicates that the type corresponds to an externally declared C++ class type, and is to be laid out the same way that C++ would lay out the type. If the C++ class has virtual primitives then the record must be declared as a tagged record type. Types for which ``CPP_Class`` is specified do not have assignment or equality operators defined (such operations can be imported or declared as subprograms as required). Initialization is allowed only by constructor functions (see pragma ``CPP_Constructor``). Such types are implicitly limited if not explicitly declared as limited or derived from a limited type, and an error is issued in that case. See :ref:`Interfacing_to_C++` for related information. Note: Pragma ``CPP_Class`` is currently obsolete. It is supported for backward compatibility but its functionality is available using pragma ``Import`` with ``Convention`` = ``CPP``. Pragma CPP_Constructor ====================== .. index:: Interfacing with C++ Syntax: :: pragma CPP_Constructor ([Entity =>] LOCAL_NAME [, [External_Name =>] static_string_EXPRESSION ] [, [Link_Name =>] static_string_EXPRESSION ]); This pragma identifies an imported function (imported in the usual way with pragma ``Import``) as corresponding to a C++ constructor. If ``External_Name`` and ``Link_Name`` are not specified then the ``Entity`` argument is a name that must have been previously mentioned in a pragma ``Import`` with ``Convention`` = ``CPP``. Such name must be of one of the following forms: * **function** ``Fname`` **return** T` * **function** ``Fname`` **return** T'Class * **function** ``Fname`` (...) **return** T` * **function** ``Fname`` (...) **return** T'Class where ``T`` is a limited record type imported from C++ with pragma ``Import`` and ``Convention`` = ``CPP``. The first two forms import the default constructor, used when an object of type ``T`` is created on the Ada side with no explicit constructor. The latter two forms cover all the non-default constructors of the type. See the GNAT User's Guide for details. If no constructors are imported, it is impossible to create any objects on the Ada side and the type is implicitly declared abstract. Pragma ``CPP_Constructor`` is intended primarily for automatic generation using an automatic binding generator tool (such as the :switch:`-fdump-ada-spec` GCC switch). See :ref:`Interfacing_to_C++` for more related information. Note: The use of functions returning class-wide types for constructors is currently obsolete. They are supported for backward compatibility. The use of functions returning the type T leave the Ada sources more clear because the imported C++ constructors always return an object of type T; that is, they never return an object whose type is a descendant of type T. Pragma CPP_Virtual ================== .. index:: Interfacing to C++ This pragma is now obsolete and, other than generating a warning if warnings on obsolescent features are enabled, is completely ignored. It is retained for compatibility purposes. It used to be required to ensure compatibility with C++, but is no longer required for that purpose because GNAT generates the same object layout as the G++ compiler by default. See :ref:`Interfacing_to_C++` for related information. Pragma CPP_Vtable ================= .. index:: Interfacing with C++ This pragma is now obsolete and, other than generating a warning if warnings on obsolescent features are enabled, is completely ignored. It used to be required to ensure compatibility with C++, but is no longer required for that purpose because GNAT generates the same object layout as the G++ compiler by default. See :ref:`Interfacing_to_C++` for related information. Pragma CPU ========== Syntax: .. code-block:: ada pragma CPU (EXPRESSION); This pragma is standard in Ada 2012, but is available in all earlier versions of Ada as an implementation-defined pragma. See Ada 2012 Reference Manual for details. Pragma Deadline_Floor ===================== Syntax: .. code-block:: ada pragma Deadline_Floor (time_span_EXPRESSION); This pragma applies only to protected types and specifies the floor deadline inherited by a task when the task enters a protected object. It is effective only when the EDF scheduling policy is used. Pragma Debug ============ Syntax: :: pragma Debug ([CONDITION, ]PROCEDURE_CALL_WITHOUT_SEMICOLON); PROCEDURE_CALL_WITHOUT_SEMICOLON ::= PROCEDURE_NAME | PROCEDURE_PREFIX ACTUAL_PARAMETER_PART The procedure call argument has the syntactic form of an expression, meeting the syntactic requirements for pragmas. If debug pragmas are not enabled or if the condition is present and evaluates to False, this pragma has no effect. If debug pragmas are enabled, the semantics of the pragma is exactly equivalent to the procedure call statement corresponding to the argument with a terminating semicolon. Pragmas are permitted in sequences of declarations, so you can use pragma ``Debug`` to intersperse calls to debug procedures in the middle of declarations. Debug pragmas can be enabled either by use of the command line switch *-gnata* or by use of the pragma ``Check_Policy`` with a first argument of ``Debug``. Pragma Debug_Policy =================== Syntax: .. code-block:: ada pragma Debug_Policy (CHECK | DISABLE | IGNORE | ON | OFF); This pragma is equivalent to a corresponding ``Check_Policy`` pragma with a first argument of ``Debug``. It is retained for historical compatibility reasons. .. _Pragma-Default_Initial_Condition: Pragma Default_Initial_Condition ================================ Syntax: .. code-block:: ada pragma Default_Initial_Condition [ (null | boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Default_Initial_Condition`` in the SPARK 2014 Reference Manual, section 7.3.3. Pragma Default_Scalar_Storage_Order =================================== .. index:: Default_Scalar_Storage_Order .. index:: Scalar_Storage_Order Syntax: .. code-block:: ada pragma Default_Scalar_Storage_Order (High_Order_First | Low_Order_First); Normally if no explicit ``Scalar_Storage_Order`` is given for a record type or array type, then the scalar storage order defaults to the ordinary default for the target. But this default may be overridden using this pragma. The pragma may appear as a configuration pragma, or locally within a package spec or declarative part. In the latter case, it applies to all subsequent types declared within that package spec or declarative part. The following example shows the use of this pragma: .. code-block:: ada pragma Default_Scalar_Storage_Order (High_Order_First); with System; use System; package DSSO1 is type H1 is record a : Integer; end record; type L2 is record a : Integer; end record; for L2'Scalar_Storage_Order use Low_Order_First; type L2a is new L2; package Inner is type H3 is record a : Integer; end record; pragma Default_Scalar_Storage_Order (Low_Order_First); type L4 is record a : Integer; end record; end Inner; type H4a is new Inner.L4; type H5 is record a : Integer; end record; end DSSO1; In this example record types with names starting with *L* have `Low_Order_First` scalar storage order, and record types with names starting with *H* have ``High_Order_First``. Note that in the case of ``H4a``, the order is not inherited from the parent type. Only an explicitly set ``Scalar_Storage_Order`` gets inherited on type derivation. If this pragma is used as a configuration pragma which appears within a configuration pragma file (as opposed to appearing explicitly at the start of a single unit), then the binder will require that all units in a partition be compiled in a similar manner, other than run-time units, which are not affected by this pragma. Note that the use of this form is discouraged because it may significantly degrade the run-time performance of the software, instead the default scalar storage order ought to be changed only on a local basis. Pragma Default_Storage_Pool =========================== .. index:: Default_Storage_Pool Syntax: .. code-block:: ada pragma Default_Storage_Pool (storage_pool_NAME | null); This pragma is standard in Ada 2012, but is available in all earlier versions of Ada as an implementation-defined pragma. See Ada 2012 Reference Manual for details. .. _Pragma-Depends: Pragma Depends ============== Syntax: .. code-block:: ada pragma Depends (DEPENDENCY_RELATION); DEPENDENCY_RELATION ::= null | (DEPENDENCY_CLAUSE {, DEPENDENCY_CLAUSE}) DEPENDENCY_CLAUSE ::= OUTPUT_LIST =>[+] INPUT_LIST | NULL_DEPENDENCY_CLAUSE NULL_DEPENDENCY_CLAUSE ::= null => INPUT_LIST OUTPUT_LIST ::= OUTPUT | (OUTPUT {, OUTPUT}) INPUT_LIST ::= null | INPUT | (INPUT {, INPUT}) OUTPUT ::= NAME | FUNCTION_RESULT INPUT ::= NAME where FUNCTION_RESULT is a function Result attribute_reference For the semantics of this pragma, see the entry for aspect ``Depends`` in the SPARK 2014 Reference Manual, section 6.1.5. Pragma Detect_Blocking ====================== Syntax: .. code-block:: ada pragma Detect_Blocking; This is a standard pragma in Ada 2005, that is available in all earlier versions of Ada as an implementation-defined pragma. This is a configuration pragma that forces the detection of potentially blocking operations within a protected operation, and to raise Program_Error if that happens. Pragma Disable_Atomic_Synchronization ===================================== .. index:: Atomic Synchronization Syntax: :: pragma Disable_Atomic_Synchronization [(Entity)]; Ada requires that accesses (reads or writes) of an atomic variable be regarded as synchronization points in the case of multiple tasks. Particularly in the case of multi-processors this may require special handling, e.g. the generation of memory barriers. This capability may be turned off using this pragma in cases where it is known not to be required. The placement and scope rules for this pragma are the same as those for ``pragma Suppress``. In particular it can be used as a configuration pragma, or in a declaration sequence where it applies till the end of the scope. If an ``Entity`` argument is present, the action applies only to that entity. Pragma Dispatching_Domain ========================= Syntax: .. code-block:: ada pragma Dispatching_Domain (EXPRESSION); This pragma is standard in Ada 2012, but is available in all earlier versions of Ada as an implementation-defined pragma. See Ada 2012 Reference Manual for details. .. _Pragma-Effective_Reads: Pragma Effective_Reads ====================== Syntax: .. code-block:: ada pragma Effective_Reads [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Effective_Reads`` in the SPARK 2014 Reference Manual, section 7.1.2. .. _Pragma-Effective_Writes: Pragma Effective_Writes ======================= Syntax: .. code-block:: ada pragma Effective_Writes [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Effective_Writes`` in the SPARK 2014 Reference Manual, section 7.1.2. Pragma Elaboration_Checks ========================= .. index:: Elaboration control Syntax: .. code-block:: ada pragma Elaboration_Checks (Dynamic | Static); This is a configuration pragma which specifies the elaboration model to be used during compilation. For more information on the elaboration models of GNAT, consult the chapter on elaboration order handling in the *GNAT User's Guide*. The pragma may appear in the following contexts: * Configuration pragmas file * Prior to the context clauses of a compilation unit's initial declaration Any other placement of the pragma will result in a warning and the effects of the offending pragma will be ignored. If the pragma argument is ``Dynamic``, then the dynamic elaboration model is in effect. If the pragma argument is ``Static``, then the static elaboration model is in effect. Pragma Eliminate ================ .. index:: Elimination of unused subprograms Syntax: :: pragma Eliminate ( [ Unit_Name => ] IDENTIFIER | SELECTED_COMPONENT , [ Entity => ] IDENTIFIER | SELECTED_COMPONENT | STRING_LITERAL [, Source_Location => SOURCE_TRACE ] ); SOURCE_TRACE ::= STRING_LITERAL This pragma indicates that the given entity is not used in the program to be compiled and built, thus allowing the compiler to eliminate the code or data associated with the named entity. Any reference to an eliminated entity causes a compile-time or link-time error. The pragma has the following semantics, where ``U`` is the unit specified by the ``Unit_Name`` argument and ``E`` is the entity specified by the ``Entity`` argument: * ``E`` must be a subprogram that is explicitly declared either: * Within ``U``, or * Within a generic package that is instantiated in ``U``, or * As an instance of generic subprogram instantiated in ``U``. Otherwise the pragma is ignored. * If ``E`` is overloaded within ``U`` then, in the absence of a ``Source_Location`` argument, all overloadings are eliminated. * If ``E`` is overloaded within ``U`` and only some overloadings are to be eliminated, then each overloading to be eliminated must be specified in a corresponding pragma ``Eliminate`` with a ``Source_Location`` argument identifying the line where the declaration appears, as described below. * If ``E`` is declared as the result of a generic instantiation, then a ``Source_Location`` argument is needed, as described below. Pragma ``Eliminate`` allows a program to be compiled in a system-independent manner, so that unused entities are eliminated but without needing to modify the source text. Normally the required set of ``Eliminate`` pragmas is constructed automatically using the ``gnatelim`` tool. Any source file change that removes, splits, or adds lines may make the set of ``Eliminate`` pragmas invalid because their ``Source_Location`` argument values may get out of date. Pragma ``Eliminate`` may be used where the referenced entity is a dispatching operation. In this case all the subprograms to which the given operation can dispatch are considered to be unused (are never called as a result of a direct or a dispatching call). The string literal given for the source location specifies the line number of the declaration of the entity, using the following syntax for ``SOURCE_TRACE``: :: SOURCE_TRACE ::= SOURCE_REFERENCE [ LBRACKET SOURCE_TRACE RBRACKET ] LBRACKET ::= '[' RBRACKET ::= ']' SOURCE_REFERENCE ::= FILE_NAME : LINE_NUMBER LINE_NUMBER ::= DIGIT {DIGIT} Spaces around the colon in a ``SOURCE_REFERENCE`` are optional. The source trace that is given as the ``Source_Location`` must obey the following rules (or else the pragma is ignored), where ``U`` is the unit ``U`` specified by the ``Unit_Name`` argument and ``E`` is the subprogram specified by the ``Entity`` argument: * ``FILE_NAME`` is the short name (with no directory information) of the Ada source file for ``U``, using the required syntax for the underlying file system (e.g. case is significant if the underlying operating system is case sensitive). If ``U`` is a package and ``E`` is a subprogram declared in the package specification and its full declaration appears in the package body, then the relevant source file is the one for the package specification; analogously if ``U`` is a generic package. * If ``E`` is not declared in a generic instantiation (this includes generic subprogram instances), the source trace includes only one source line reference. ``LINE_NUMBER`` gives the line number of the occurrence of the declaration of ``E`` within the source file (as a decimal literal without an exponent or point). * If ``E`` is declared by a generic instantiation, its source trace (from left to right) starts with the source location of the declaration of ``E`` in the generic unit and ends with the source location of the instantiation, given in square brackets. This approach is applied recursively with nested instantiations: the rightmost (nested most deeply in square brackets) element of the source trace is the location of the outermost instantiation, and the leftmost element (that is, outside of any square brackets) is the location of the declaration of ``E`` in the generic unit. Examples: .. code-block:: ada pragma Eliminate (Pkg0, Proc); -- Eliminate (all overloadings of) Proc in Pkg0 pragma Eliminate (Pkg1, Proc, Source_Location => "pkg1.ads:8"); -- Eliminate overloading of Proc at line 8 in pkg1.ads -- Assume the following file contents: -- gen_pkg.ads -- 1: generic -- 2: type T is private; -- 3: package Gen_Pkg is -- 4: procedure Proc(N : T); -- ... ... -- ... end Gen_Pkg; -- -- q.adb -- 1: with Gen_Pkg; -- 2: procedure Q is -- 3: package Inst_Pkg is new Gen_Pkg(Integer); -- ... -- No calls on Inst_Pkg.Proc -- ... end Q; -- The following pragma eliminates Inst_Pkg.Proc from Q pragma Eliminate (Q, Proc, Source_Location => "gen_pkg.ads:4[q.adb:3]"); Pragma Enable_Atomic_Synchronization ==================================== .. index:: Atomic Synchronization Syntax: :: pragma Enable_Atomic_Synchronization [(Entity)]; Ada requires that accesses (reads or writes) of an atomic variable be regarded as synchronization points in the case of multiple tasks. Particularly in the case of multi-processors this may require special handling, e.g. the generation of memory barriers. This synchronization is performed by default, but can be turned off using ``pragma Disable_Atomic_Synchronization``. The ``Enable_Atomic_Synchronization`` pragma can be used to turn it back on. The placement and scope rules for this pragma are the same as those for ``pragma Unsuppress``. In particular it can be used as a configuration pragma, or in a declaration sequence where it applies till the end of the scope. If an ``Entity`` argument is present, the action applies only to that entity. Pragma Exceptional_Cases ======================== .. index:: Exceptional_Cases Syntax: :: pragma Exceptional_Cases (EXCEPTIONAL_CASE_LIST); EXCEPTIONAL_CASE_LIST ::= EXCEPTIONAL_CASE {, EXCEPTIONAL_CASE} EXCEPTIONAL_CASE ::= exception_choice {'|' exception_choice} => CONSEQUENCE CONSEQUENCE ::= Boolean_expression For the semantics of this aspect, see the SPARK 2014 Reference Manual, section 6.1.9. Pragma Export_Function ====================== .. index:: Argument passing mechanisms Syntax: :: pragma Export_Function ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Parameter_Types =>] PARAMETER_TYPES] [, [Result_Type =>] result_SUBTYPE_MARK] [, [Mechanism =>] MECHANISM] [, [Result_Mechanism =>] MECHANISM_NAME]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION | "" PARAMETER_TYPES ::= null | TYPE_DESIGNATOR {, TYPE_DESIGNATOR} TYPE_DESIGNATOR ::= subtype_NAME | subtype_Name ' Access MECHANISM ::= MECHANISM_NAME | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION}) MECHANISM_ASSOCIATION ::= [formal_parameter_NAME =>] MECHANISM_NAME MECHANISM_NAME ::= Value | Reference Use this pragma to make a function externally callable and optionally provide information on mechanisms to be used for passing parameter and result values. We recommend, for the purposes of improving portability, this pragma always be used in conjunction with a separate pragma ``Export``, which must precede the pragma ``Export_Function``. GNAT does not require a separate pragma ``Export``, but if none is present, ``Convention Ada`` is assumed, which is usually not what is wanted, so it is usually appropriate to use this pragma in conjunction with a ``Export`` or ``Convention`` pragma that specifies the desired foreign convention. Pragma ``Export_Function`` (and ``Export``, if present) must appear in the same declarative region as the function to which they apply. The ``internal_name`` must uniquely designate the function to which the pragma applies. If more than one function name exists of this name in the declarative part you must use the ``Parameter_Types`` and ``Result_Type`` parameters to achieve the required unique designation. The `subtype_mark`\ s in these parameters must exactly match the subtypes in the corresponding function specification, using positional notation to match parameters with subtype marks. The form with an ``'Access`` attribute can be used to match an anonymous access parameter. .. index:: Suppressing external name Special treatment is given if the EXTERNAL is an explicit null string or a static string expressions that evaluates to the null string. In this case, no external name is generated. This form still allows the specification of parameter mechanisms. Pragma Export_Object ==================== Syntax: :: pragma Export_Object ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Size =>] EXTERNAL_SYMBOL]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION This pragma designates an object as exported, and apart from the extended rules for external symbols, is identical in effect to the use of the normal ``Export`` pragma applied to an object. You may use a separate Export pragma (and you probably should from the point of view of portability), but it is not required. ``Size`` is syntax checked, but otherwise ignored by GNAT. Pragma Export_Procedure ======================= Syntax: :: pragma Export_Procedure ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Parameter_Types =>] PARAMETER_TYPES] [, [Mechanism =>] MECHANISM]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION | "" PARAMETER_TYPES ::= null | TYPE_DESIGNATOR {, TYPE_DESIGNATOR} TYPE_DESIGNATOR ::= subtype_NAME | subtype_Name ' Access MECHANISM ::= MECHANISM_NAME | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION}) MECHANISM_ASSOCIATION ::= [formal_parameter_NAME =>] MECHANISM_NAME MECHANISM_NAME ::= Value | Reference This pragma is identical to ``Export_Function`` except that it applies to a procedure rather than a function and the parameters ``Result_Type`` and ``Result_Mechanism`` are not permitted. GNAT does not require a separate pragma ``Export``, but if none is present, ``Convention Ada`` is assumed, which is usually not what is wanted, so it is usually appropriate to use this pragma in conjunction with a ``Export`` or ``Convention`` pragma that specifies the desired foreign convention. .. index:: Suppressing external name Special treatment is given if the EXTERNAL is an explicit null string or a static string expressions that evaluates to the null string. In this case, no external name is generated. This form still allows the specification of parameter mechanisms. Pragma Export_Valued_Procedure ============================== Syntax: :: pragma Export_Valued_Procedure ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Parameter_Types =>] PARAMETER_TYPES] [, [Mechanism =>] MECHANISM]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION | "" PARAMETER_TYPES ::= null | TYPE_DESIGNATOR {, TYPE_DESIGNATOR} TYPE_DESIGNATOR ::= subtype_NAME | subtype_Name ' Access MECHANISM ::= MECHANISM_NAME | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION}) MECHANISM_ASSOCIATION ::= [formal_parameter_NAME =>] MECHANISM_NAME MECHANISM_NAME ::= Value | Reference This pragma is identical to ``Export_Procedure`` except that the first parameter of ``LOCAL_NAME``, which must be present, must be of mode ``out``, and externally the subprogram is treated as a function with this parameter as the result of the function. GNAT provides for this capability to allow the use of ``out`` and ``in out`` parameters in interfacing to external functions (which are not permitted in Ada functions). GNAT does not require a separate pragma ``Export``, but if none is present, ``Convention Ada`` is assumed, which is almost certainly not what is wanted since the whole point of this pragma is to interface with foreign language functions, so it is usually appropriate to use this pragma in conjunction with a ``Export`` or ``Convention`` pragma that specifies the desired foreign convention. .. index:: Suppressing external name Special treatment is given if the EXTERNAL is an explicit null string or a static string expressions that evaluates to the null string. In this case, no external name is generated. This form still allows the specification of parameter mechanisms. Pragma Extend_System ==================== .. index:: System, extending .. index:: DEC Ada 83 Syntax: :: pragma Extend_System ([Name =>] IDENTIFIER); This pragma is used to provide backwards compatibility with other implementations that extend the facilities of package ``System``. In GNAT, ``System`` contains only the definitions that are present in the Ada RM. However, other implementations, notably the DEC Ada 83 implementation, provide many extensions to package ``System``. For each such implementation accommodated by this pragma, GNAT provides a package :samp:`Aux_{xxx}`, e.g., ``Aux_DEC`` for the DEC Ada 83 implementation, which provides the required additional definitions. You can use this package in two ways. You can ``with`` it in the normal way and access entities either by selection or using a ``use`` clause. In this case no special processing is required. However, if existing code contains references such as :samp:`System.{xxx}` where *xxx* is an entity in the extended definitions provided in package ``System``, you may use this pragma to extend visibility in ``System`` in a non-standard way that provides greater compatibility with the existing code. Pragma ``Extend_System`` is a configuration pragma whose single argument is the name of the package containing the extended definition (e.g., ``Aux_DEC`` for the DEC Ada case). A unit compiled under control of this pragma will be processed using special visibility processing that looks in package :samp:`System.Aux_{xxx}` where :samp:`Aux_{xxx}` is the pragma argument for any entity referenced in package ``System``, but not found in package ``System``. You can use this pragma either to access a predefined ``System`` extension supplied with the compiler, for example ``Aux_DEC`` or you can construct your own extension unit following the above definition. Note that such a package is a child of ``System`` and thus is considered part of the implementation. To compile it you will have to use the *-gnatg* switch for compiling System units, as explained in the GNAT User's Guide. .. _Pragma_Extensions_Allowed: Pragma Extensions_Allowed ========================= .. index:: Ada Extensions .. index:: GNAT Extensions Syntax: .. code-block:: ada pragma Extensions_Allowed (On | Off | All); This configuration pragma enables (via the "On" or "All" argument) or disables (via the "Off" argument) the implementation extension mode; the pragma takes precedence over the ``-gnatX`` and ``-gnatX0`` command switches. If an argument of ``"On"`` is specified, the latest version of the Ada language is implemented (currently Ada 2022) and, in addition, a curated set of GNAT specific extensions are recognized. (See the list here :ref:`here`) An argument of ``"All"`` has the same effect except that some extra experimental extensions are enabled (See the list here :ref:`here`) .. _Pragma-Extensions_Visible: Pragma Extensions_Visible ========================= Syntax: .. code-block:: ada pragma Extensions_Visible [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Extensions_Visible`` in the SPARK 2014 Reference Manual, section 6.1.7. Pragma External =============== Syntax: :: pragma External ( [ Convention =>] convention_IDENTIFIER, [ Entity =>] LOCAL_NAME [, [External_Name =>] static_string_EXPRESSION ] [, [Link_Name =>] static_string_EXPRESSION ]); This pragma is identical in syntax and semantics to pragma ``Export`` as defined in the Ada Reference Manual. It is provided for compatibility with some Ada 83 compilers that used this pragma for exactly the same purposes as pragma ``Export`` before the latter was standardized. Pragma External_Name_Casing =========================== .. index:: Dec Ada 83 casing compatibility .. index:: External Names, casing .. index:: Casing of External names Syntax: :: pragma External_Name_Casing ( Uppercase | Lowercase [, Uppercase | Lowercase | As_Is]); This pragma provides control over the casing of external names associated with Import and Export pragmas. There are two cases to consider: * Implicit external names Implicit external names are derived from identifiers. The most common case arises when a standard Ada Import or Export pragma is used with only two arguments, as in: .. code-block:: ada pragma Import (C, C_Routine); Since Ada is a case-insensitive language, the spelling of the identifier in the Ada source program does not provide any information on the desired casing of the external name, and so a convention is needed. In GNAT the default treatment is that such names are converted to all lower case letters. This corresponds to the normal C style in many environments. The first argument of pragma ``External_Name_Casing`` can be used to control this treatment. If ``Uppercase`` is specified, then the name will be forced to all uppercase letters. If ``Lowercase`` is specified, then the normal default of all lower case letters will be used. This same implicit treatment is also used in the case of extended DEC Ada 83 compatible Import and Export pragmas where an external name is explicitly specified using an identifier rather than a string. * Explicit external names Explicit external names are given as string literals. The most common case arises when a standard Ada Import or Export pragma is used with three arguments, as in: .. code-block:: ada pragma Import (C, C_Routine, "C_routine"); In this case, the string literal normally provides the exact casing required for the external name. The second argument of pragma ``External_Name_Casing`` may be used to modify this behavior. If ``Uppercase`` is specified, then the name will be forced to all uppercase letters. If ``Lowercase`` is specified, then the name will be forced to all lowercase letters. A specification of ``As_Is`` provides the normal default behavior in which the casing is taken from the string provided. This pragma may appear anywhere that a pragma is valid. In particular, it can be used as a configuration pragma in the :file:`gnat.adc` file, in which case it applies to all subsequent compilations, or it can be used as a program unit pragma, in which case it only applies to the current unit, or it can be used more locally to control individual Import/Export pragmas. It was primarily intended for use with OpenVMS systems, where many compilers convert all symbols to upper case by default. For interfacing to such compilers (e.g., the DEC C compiler), it may be convenient to use the pragma: .. code-block:: ada pragma External_Name_Casing (Uppercase, Uppercase); to enforce the upper casing of all external symbols. Pragma Fast_Math ================ Syntax: .. code-block:: ada pragma Fast_Math; This is a configuration pragma which activates a mode in which speed is considered more important for floating-point operations than absolutely accurate adherence to the requirements of the standard. Currently the following operations are affected: *Complex Multiplication* The normal simple formula for complex multiplication can result in intermediate overflows for numbers near the end of the range. The Ada standard requires that this situation be detected and corrected by scaling, but in Fast_Math mode such cases will simply result in overflow. Note that to take advantage of this you must instantiate your own version of ``Ada.Numerics.Generic_Complex_Types`` under control of the pragma, rather than use the preinstantiated versions. .. _Pragma-Favor_Top_Level: Pragma Favor_Top_Level ====================== Syntax: .. code-block:: ada pragma Favor_Top_Level (type_LOCAL_NAME); The argument of pragma ``Favor_Top_Level`` must be a named access-to-subprogram type. This pragma is an efficiency hint to the compiler, regarding the use of ``'Access`` or ``'Unrestricted_Access`` on nested (non-library-level) subprograms. The pragma means that nested subprograms are not used with this type, or are rare, so that the generated code should be efficient in the top-level case. When this pragma is used, dynamically generated trampolines may be used on some targets for nested subprograms. See restriction ``No_Implicit_Dynamic_Code``. Pragma Finalize_Storage_Only ============================ Syntax: .. code-block:: ada pragma Finalize_Storage_Only (first_subtype_LOCAL_NAME); The argument of pragma ``Finalize_Storage_Only`` must denote a local type which is derived from ``Ada.Finalization.Controlled`` or ``Limited_Controlled``. The pragma suppresses the call to ``Finalize`` for declared library-level objects of the argument type. This is mostly useful for types where finalization is only used to deal with storage reclamation since in most environments it is not necessary to reclaim memory just before terminating execution, hence the name. Note that this pragma does not suppress Finalize calls for library-level heap-allocated objects (see pragma ``No_Heap_Finalization``). Pragma Float_Representation =========================== Syntax:: pragma Float_Representation (FLOAT_REP[, float_type_LOCAL_NAME]); FLOAT_REP ::= VAX_Float | IEEE_Float In the one argument form, this pragma is a configuration pragma which allows control over the internal representation chosen for the predefined floating point types declared in the packages ``Standard`` and ``System``. This pragma is only provided for compatibility and has no effect. The two argument form specifies the representation to be used for the specified floating-point type. The argument must be ``IEEE_Float`` to specify the use of IEEE format, as follows: * For a digits value of 6, 32-bit IEEE short format will be used. * For a digits value of 15, 64-bit IEEE long format will be used. * No other value of digits is permitted. .. _Pragma-Ghost: Pragma Ghost ============ Syntax: .. code-block:: ada pragma Ghost [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Ghost`` in the SPARK 2014 Reference Manual, section 6.9. .. _Pragma-Global: Pragma Global ============= Syntax: .. code-block:: ada pragma Global (GLOBAL_SPECIFICATION); GLOBAL_SPECIFICATION ::= null | (GLOBAL_LIST) | (MODED_GLOBAL_LIST {, MODED_GLOBAL_LIST}) MODED_GLOBAL_LIST ::= MODE_SELECTOR => GLOBAL_LIST MODE_SELECTOR ::= In_Out | Input | Output | Proof_In GLOBAL_LIST ::= GLOBAL_ITEM | (GLOBAL_ITEM {, GLOBAL_ITEM}) GLOBAL_ITEM ::= NAME For the semantics of this pragma, see the entry for aspect ``Global`` in the SPARK 2014 Reference Manual, section 6.1.4. Pragma Ident ============ Syntax: .. code-block:: ada pragma Ident (static_string_EXPRESSION); This pragma is identical in effect to pragma ``Comment``. It is provided for compatibility with other Ada compilers providing this pragma. Pragma Ignore_Pragma ==================== Syntax: .. code-block:: ada pragma Ignore_Pragma (pragma_IDENTIFIER); This is a configuration pragma that takes a single argument that is a simple identifier. Any subsequent use of a pragma whose pragma identifier matches this argument will be silently ignored. Any preceding use of a pragma whose pragma identifier matches this argument will be parsed and then ignored. This may be useful when legacy code or code intended for compilation with some other compiler contains pragmas that match the name, but not the exact implementation, of a GNAT pragma. The use of this pragma allows such pragmas to be ignored, which may be useful in CodePeer mode, or during porting of legacy code. Pragma Implementation_Defined ============================= Syntax: .. code-block:: ada pragma Implementation_Defined (local_NAME); This pragma marks a previously declared entity as implementation-defined. For an overloaded entity, applies to the most recent homonym. .. code-block:: ada pragma Implementation_Defined; The form with no arguments appears anywhere within a scope, most typically a package spec, and indicates that all entities that are defined within the package spec are Implementation_Defined. This pragma is used within the GNAT runtime library to identify implementation-defined entities introduced in language-defined units, for the purpose of implementing the No_Implementation_Identifiers restriction. Pragma Implemented ================== Syntax: :: pragma Implemented (procedure_LOCAL_NAME, implementation_kind); implementation_kind ::= By_Entry | By_Protected_Procedure | By_Any This is an Ada 2012 representation pragma which applies to protected, task and synchronized interface primitives. The use of pragma Implemented provides a way to impose a static requirement on the overriding operation by adhering to one of the three implementation kinds: entry, protected procedure or any of the above. This pragma is available in all earlier versions of Ada as an implementation-defined pragma. .. code-block:: ada type Synch_Iface is synchronized interface; procedure Prim_Op (Obj : in out Iface) is abstract; pragma Implemented (Prim_Op, By_Protected_Procedure); protected type Prot_1 is new Synch_Iface with procedure Prim_Op; -- Legal end Prot_1; protected type Prot_2 is new Synch_Iface with entry Prim_Op; -- Illegal end Prot_2; task type Task_Typ is new Synch_Iface with entry Prim_Op; -- Illegal end Task_Typ; When applied to the procedure_or_entry_NAME of a requeue statement, pragma Implemented determines the runtime behavior of the requeue. Implementation kind By_Entry guarantees that the action of requeueing will proceed from an entry to another entry. Implementation kind By_Protected_Procedure transforms the requeue into a dispatching call, thus eliminating the chance of blocking. Kind By_Any shares the behavior of By_Entry and By_Protected_Procedure depending on the target's overriding subprogram kind. Pragma Implicit_Packing ======================= .. index:: Rational Profile Syntax: .. code-block:: ada pragma Implicit_Packing; This is a configuration pragma that requests implicit packing for packed arrays for which a size clause is given but no explicit pragma Pack or specification of Component_Size is present. It also applies to records where no record representation clause is present. Consider this example: .. code-block:: ada type R is array (0 .. 7) of Boolean; for R'Size use 8; In accordance with the recommendation in the RM (RM 13.3(53)), a Size clause does not change the layout of a composite object. So the Size clause in the above example is normally rejected, since the default layout of the array uses 8-bit components, and thus the array requires a minimum of 64 bits. If this declaration is compiled in a region of code covered by an occurrence of the configuration pragma Implicit_Packing, then the Size clause in this and similar examples will cause implicit packing and thus be accepted. For this implicit packing to occur, the type in question must be an array of small components whose size is known at compile time, and the Size clause must specify the exact size that corresponds to the number of elements in the array multiplied by the size in bits of the component type (both single and multi-dimensioned arrays can be controlled with this pragma). .. index:: Array packing Similarly, the following example shows the use in the record case .. code-block:: ada type r is record a, b, c, d, e, f, g, h : boolean; chr : character; end record; for r'size use 16; Without a pragma Pack, each Boolean field requires 8 bits, so the minimum size is 72 bits, but with a pragma Pack, 16 bits would be sufficient. The use of pragma Implicit_Packing allows this record declaration to compile without an explicit pragma Pack. Pragma Import_Function ====================== Syntax: :: pragma Import_Function ( [Internal =>] LOCAL_NAME, [, [External =>] EXTERNAL_SYMBOL] [, [Parameter_Types =>] PARAMETER_TYPES] [, [Result_Type =>] SUBTYPE_MARK] [, [Mechanism =>] MECHANISM] [, [Result_Mechanism =>] MECHANISM_NAME]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION PARAMETER_TYPES ::= null | TYPE_DESIGNATOR {, TYPE_DESIGNATOR} TYPE_DESIGNATOR ::= subtype_NAME | subtype_Name ' Access MECHANISM ::= MECHANISM_NAME | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION}) MECHANISM_ASSOCIATION ::= [formal_parameter_NAME =>] MECHANISM_NAME MECHANISM_NAME ::= Value | Reference This pragma is used in conjunction with a pragma ``Import`` to specify additional information for an imported function. The pragma ``Import`` (or equivalent pragma ``Interface``) must precede the ``Import_Function`` pragma and both must appear in the same declarative part as the function specification. The ``Internal`` argument must uniquely designate the function to which the pragma applies. If more than one function name exists of this name in the declarative part you must use the ``Parameter_Types`` and ``Result_Type`` parameters to achieve the required unique designation. Subtype marks in these parameters must exactly match the subtypes in the corresponding function specification, using positional notation to match parameters with subtype marks. The form with an ``'Access`` attribute can be used to match an anonymous access parameter. You may optionally use the ``Mechanism`` and ``Result_Mechanism`` parameters to specify passing mechanisms for the parameters and result. If you specify a single mechanism name, it applies to all parameters. Otherwise you may specify a mechanism on a parameter by parameter basis using either positional or named notation. If the mechanism is not specified, the default mechanism is used. Pragma Import_Object ==================== Syntax: :: pragma Import_Object ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Size =>] EXTERNAL_SYMBOL]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION This pragma designates an object as imported, and apart from the extended rules for external symbols, is identical in effect to the use of the normal ``Import`` pragma applied to an object. Unlike the subprogram case, you need not use a separate ``Import`` pragma, although you may do so (and probably should do so from a portability point of view). ``size`` is syntax checked, but otherwise ignored by GNAT. Pragma Import_Procedure ======================= Syntax: :: pragma Import_Procedure ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Parameter_Types =>] PARAMETER_TYPES] [, [Mechanism =>] MECHANISM]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION PARAMETER_TYPES ::= null | TYPE_DESIGNATOR {, TYPE_DESIGNATOR} TYPE_DESIGNATOR ::= subtype_NAME | subtype_Name ' Access MECHANISM ::= MECHANISM_NAME | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION}) MECHANISM_ASSOCIATION ::= [formal_parameter_NAME =>] MECHANISM_NAME MECHANISM_NAME ::= Value | Reference This pragma is identical to ``Import_Function`` except that it applies to a procedure rather than a function and the parameters ``Result_Type`` and ``Result_Mechanism`` are not permitted. Pragma Import_Valued_Procedure ============================== Syntax: :: pragma Import_Valued_Procedure ( [Internal =>] LOCAL_NAME [, [External =>] EXTERNAL_SYMBOL] [, [Parameter_Types =>] PARAMETER_TYPES] [, [Mechanism =>] MECHANISM]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION PARAMETER_TYPES ::= null | TYPE_DESIGNATOR {, TYPE_DESIGNATOR} TYPE_DESIGNATOR ::= subtype_NAME | subtype_Name ' Access MECHANISM ::= MECHANISM_NAME | (MECHANISM_ASSOCIATION {, MECHANISM_ASSOCIATION}) MECHANISM_ASSOCIATION ::= [formal_parameter_NAME =>] MECHANISM_NAME MECHANISM_NAME ::= Value | Reference This pragma is identical to ``Import_Procedure`` except that the first parameter of ``LOCAL_NAME``, which must be present, must be of mode ``out``, and externally the subprogram is treated as a function with this parameter as the result of the function. The purpose of this capability is to allow the use of ``out`` and ``in out`` parameters in interfacing to external functions (which are not permitted in Ada functions). You may optionally use the ``Mechanism`` parameters to specify passing mechanisms for the parameters. If you specify a single mechanism name, it applies to all parameters. Otherwise you may specify a mechanism on a parameter by parameter basis using either positional or named notation. If the mechanism is not specified, the default mechanism is used. Note that it is important to use this pragma in conjunction with a separate pragma Import that specifies the desired convention, since otherwise the default convention is Ada, which is almost certainly not what is required. Pragma Independent ================== Syntax: .. code-block:: ada pragma Independent (component_LOCAL_NAME); This pragma is standard in Ada 2012 mode (which also provides an aspect of the same name). It is also available as an implementation-defined pragma in all earlier versions. It specifies that the designated object or all objects of the designated type must be independently addressable. This means that separate tasks can safely manipulate such objects. For example, if two components of a record are independent, then two separate tasks may access these two components. This may place constraints on the representation of the object (for instance prohibiting tight packing). Pragma Independent_Components ============================= Syntax: .. code-block:: ada pragma Independent_Components (Local_NAME); This pragma is standard in Ada 2012 mode (which also provides an aspect of the same name). It is also available as an implementation-defined pragma in all earlier versions. It specifies that the components of the designated object, or the components of each object of the designated type, must be independently addressable. This means that separate tasks can safely manipulate separate components in the composite object. This may place constraints on the representation of the object (for instance prohibiting tight packing). .. _Pragma-Initial_Condition: Pragma Initial_Condition ======================== Syntax: .. code-block:: ada pragma Initial_Condition (boolean_EXPRESSION); For the semantics of this pragma, see the entry for aspect ``Initial_Condition`` in the SPARK 2014 Reference Manual, section 7.1.6. Pragma Initialize_Scalars ========================= .. index:: debugging with Initialize_Scalars Syntax: .. code-block:: ada pragma Initialize_Scalars [ ( TYPE_VALUE_PAIR {, TYPE_VALUE_PAIR} ) ]; TYPE_VALUE_PAIR ::= SCALAR_TYPE => static_EXPRESSION SCALAR_TYPE := Short_Float | Float | Long_Float | Long_Long_Flat | Signed_8 | Signed_16 | Signed_32 | Signed_64 | Unsigned_8 | Unsigned_16 | Unsigned_32 | Unsigned_64 This pragma is similar to ``Normalize_Scalars`` conceptually but has two important differences. First, there is no requirement for the pragma to be used uniformly in all units of a partition. In particular, it is fine to use this just for some or all of the application units of a partition, without needing to recompile the run-time library. In the case where some units are compiled with the pragma, and some without, then a declaration of a variable where the type is defined in package Standard or is locally declared will always be subject to initialization, as will any declaration of a scalar variable. For composite variables, whether the variable is initialized may also depend on whether the package in which the type of the variable is declared is compiled with the pragma. The other important difference is that the programmer can control the value used for initializing scalar objects. This effect can be achieved in several different ways: * At compile time, the programmer can specify the invalid value for a particular family of scalar types using the optional arguments of the pragma. The compile-time approach is intended to optimize the generated code for the pragma, by possibly using fast operations such as ``memset``. Note that such optimizations require using values where the bytes all have the same binary representation. * At bind time, the programmer has several options: * Initialization with invalid values (similar to Normalize_Scalars, though for Initialize_Scalars it is not always possible to determine the invalid values in complex cases like signed component fields with nonstandard sizes). * Initialization with high values. * Initialization with low values. * Initialization with a specific bit pattern. See the GNAT User's Guide for binder options for specifying these cases. The bind-time approach is intended to provide fast turnaround for testing with different values, without having to recompile the program. * At execution time, the programmer can specify the invalid values using an environment variable. See the GNAT User's Guide for details. The execution-time approach is intended to provide fast turnaround for testing with different values, without having to recompile and rebind the program. Note that pragma ``Initialize_Scalars`` is particularly useful in conjunction with the enhanced validity checking that is now provided in GNAT, which checks for invalid values under more conditions. Using this feature (see description of the *-gnatV* flag in the GNAT User's Guide) in conjunction with pragma ``Initialize_Scalars`` provides a powerful new tool to assist in the detection of problems caused by uninitialized variables. Note: the use of ``Initialize_Scalars`` has a fairly extensive effect on the generated code. This may cause your code to be substantially larger. It may also cause an increase in the amount of stack required, so it is probably a good idea to turn on stack checking (see description of stack checking in the GNAT User's Guide) when using this pragma. .. _Pragma-Initializes: Pragma Initializes ================== Syntax: .. code-block:: ada pragma Initializes (INITIALIZATION_LIST); INITIALIZATION_LIST ::= null | (INITIALIZATION_ITEM {, INITIALIZATION_ITEM}) INITIALIZATION_ITEM ::= name [=> INPUT_LIST] INPUT_LIST ::= null | INPUT | (INPUT {, INPUT}) INPUT ::= name For the semantics of this pragma, see the entry for aspect ``Initializes`` in the SPARK 2014 Reference Manual, section 7.1.5. .. _Pragma-Inline_Always: Pragma Inline_Always ==================== Syntax: :: pragma Inline_Always (NAME [, NAME]); Similar to pragma ``Inline`` except that inlining is unconditional. Inline_Always instructs the compiler to inline every direct call to the subprogram or else to emit a compilation error, independently of any option, in particular *-gnatn* or *-gnatN* or the optimization level. It is an error to take the address or access of ``NAME``. It is also an error to apply this pragma to a primitive operation of a tagged type. Thanks to such restrictions, the compiler is allowed to remove the out-of-line body of ``NAME``. Pragma Inline_Generic ===================== Syntax: :: pragma Inline_Generic (GNAME {, GNAME}); GNAME ::= generic_unit_NAME | generic_instance_NAME This pragma is provided for compatibility with Dec Ada 83. It has no effect in GNAT (which always inlines generics), other than to check that the given names are all names of generic units or generic instances. Pragma Interface ================ Syntax: :: pragma Interface ( [Convention =>] convention_identifier, [Entity =>] local_NAME [, [External_Name =>] static_string_expression] [, [Link_Name =>] static_string_expression]); This pragma is identical in syntax and semantics to the standard Ada pragma ``Import``. It is provided for compatibility with Ada 83. The definition is upwards compatible both with pragma ``Interface`` as defined in the Ada 83 Reference Manual, and also with some extended implementations of this pragma in certain Ada 83 implementations. The only difference between pragma ``Interface`` and pragma ``Import`` is that there is special circuitry to allow both pragmas to appear for the same subprogram entity (normally it is illegal to have multiple ``Import`` pragmas). This is useful in maintaining Ada 83/Ada 95 compatibility and is compatible with other Ada 83 compilers. Pragma Interface_Name ===================== Syntax: :: pragma Interface_Name ( [Entity =>] LOCAL_NAME [, [External_Name =>] static_string_EXPRESSION] [, [Link_Name =>] static_string_EXPRESSION]); This pragma provides an alternative way of specifying the interface name for an interfaced subprogram, and is provided for compatibility with Ada 83 compilers that use the pragma for this purpose. You must provide at least one of ``External_Name`` or ``Link_Name``. Pragma Interrupt_Handler ======================== Syntax: .. code-block:: ada pragma Interrupt_Handler (procedure_LOCAL_NAME); This program unit pragma is supported for parameterless protected procedures as described in Annex C of the Ada Reference Manual. Pragma Interrupt_State ====================== Syntax: :: pragma Interrupt_State ([Name =>] value, [State =>] SYSTEM | RUNTIME | USER); Normally certain interrupts are reserved to the implementation. Any attempt to attach an interrupt causes Program_Error to be raised, as described in RM C.3.2(22). A typical example is the ``SIGINT`` interrupt used in many systems for an :kbd:`Ctrl-C` interrupt. Normally this interrupt is reserved to the implementation, so that :kbd:`Ctrl-C` can be used to interrupt execution. Additionally, signals such as ``SIGSEGV``, ``SIGABRT``, ``SIGFPE`` and ``SIGILL`` are often mapped to specific Ada exceptions, or used to implement run-time functions such as the ``abort`` statement and stack overflow checking. Pragma ``Interrupt_State`` provides a general mechanism for overriding such uses of interrupts. It subsumes the functionality of pragma ``Unreserve_All_Interrupts``. Pragma ``Interrupt_State`` is not available on Windows. On all other platforms than VxWorks, it applies to signals; on VxWorks, it applies to vectored hardware interrupts and may be used to mark interrupts required by the board support package as reserved. Interrupts can be in one of three states: * System The interrupt is reserved (no Ada handler can be installed), and the Ada run-time may not install a handler. As a result you are guaranteed standard system default action if this interrupt is raised. This also allows installing a low level handler via C APIs such as sigaction(), outside of Ada control. * Runtime The interrupt is reserved (no Ada handler can be installed). The run time is allowed to install a handler for internal control purposes, but is not required to do so. * User The interrupt is unreserved. The user may install an Ada handler via Ada.Interrupts and pragma Interrupt_Handler or Attach_Handler to provide some other action. These states are the allowed values of the ``State`` parameter of the pragma. The ``Name`` parameter is a value of the type ``Ada.Interrupts.Interrupt_ID``. Typically, it is a name declared in ``Ada.Interrupts.Names``. This is a configuration pragma, and the binder will check that there are no inconsistencies between different units in a partition in how a given interrupt is specified. It may appear anywhere a pragma is legal. The effect is to move the interrupt to the specified state. By declaring interrupts to be SYSTEM, you guarantee the standard system action, such as a core dump. By declaring interrupts to be USER, you guarantee that you can install a handler. Note that certain signals on many operating systems cannot be caught and handled by applications. In such cases, the pragma is ignored. See the operating system documentation, or the value of the array ``Reserved`` declared in the spec of package ``System.OS_Interface``. Overriding the default state of signals used by the Ada runtime may interfere with an application's runtime behavior in the cases of the synchronous signals, and in the case of the signal used to implement the ``abort`` statement. .. _Pragma-Invariant: Pragma Invariant ================ Syntax: :: pragma Invariant ([Entity =>] private_type_LOCAL_NAME, [Check =>] EXPRESSION [,[Message =>] String_Expression]); This pragma provides exactly the same capabilities as the Type_Invariant aspect defined in AI05-0146-1, and in the Ada 2012 Reference Manual. The Type_Invariant aspect is fully implemented in Ada 2012 mode, but since it requires the use of the aspect syntax, which is not available except in 2012 mode, it is not possible to use the Type_Invariant aspect in earlier versions of Ada. However the Invariant pragma may be used in any version of Ada. Also note that the aspect Invariant is a synonym in GNAT for the aspect Type_Invariant, but there is no pragma Type_Invariant. The pragma must appear within the visible part of the package specification, after the type to which its Entity argument appears. As with the Invariant aspect, the Check expression is not analyzed until the end of the visible part of the package, so it may contain forward references. The Message argument, if present, provides the exception message used if the invariant is violated. If no Message parameter is provided, a default message that identifies the line on which the pragma appears is used. It is permissible to have multiple Invariants for the same type entity, in which case they are and'ed together. It is permissible to use this pragma in Ada 2012 mode, but you cannot have both an invariant aspect and an invariant pragma for the same entity. For further details on the use of this pragma, see the Ada 2012 documentation of the Type_Invariant aspect. Pragma Keep_Names ================= Syntax: :: pragma Keep_Names ([On =>] enumeration_first_subtype_LOCAL_NAME); The ``LOCAL_NAME`` argument must refer to an enumeration first subtype in the current declarative part. The effect is to retain the enumeration literal names for use by ``Image`` and ``Value`` even if a global ``Discard_Names`` pragma applies. This is useful when you want to generally suppress enumeration literal names and for example you therefore use a ``Discard_Names`` pragma in the :file:`gnat.adc` file, but you want to retain the names for specific enumeration types. Pragma License ============== .. index:: License checking Syntax: .. code-block:: ada pragma License (Unrestricted | GPL | Modified_GPL | Restricted); This pragma is provided to allow automated checking for appropriate license conditions with respect to the standard and modified GPL. A pragma ``License``, which is a configuration pragma that typically appears at the start of a source file or in a separate :file:`gnat.adc` file, specifies the licensing conditions of a unit as follows: * Unrestricted This is used for a unit that can be freely used with no license restrictions. Examples of such units are public domain units, and units from the Ada Reference Manual. * GPL This is used for a unit that is licensed under the unmodified GPL, and which therefore cannot be ``with``\ ed by a restricted unit. * Modified_GPL This is used for a unit licensed under the GNAT modified GPL that includes a special exception paragraph that specifically permits the inclusion of the unit in programs without requiring the entire program to be released under the GPL. * Restricted This is used for a unit that is restricted in that it is not permitted to depend on units that are licensed under the GPL. Typical examples are proprietary code that is to be released under more restrictive license conditions. Note that restricted units are permitted to ``with`` units which are licensed under the modified GPL (this is the whole point of the modified GPL). Normally a unit with no ``License`` pragma is considered to have an unknown license, and no checking is done. However, standard GNAT headers are recognized, and license information is derived from them as follows. A GNAT license header starts with a line containing 78 hyphens. The following comment text is searched for the appearance of any of the following strings. If the string 'GNU General Public License' is found, then the unit is assumed to have GPL license, unless the string 'As a special exception' follows, in which case the license is assumed to be modified GPL. If one of the strings 'This specification is adapted from the Ada Semantic Interface' or 'This specification is derived from the Ada Reference Manual' is found then the unit is assumed to be unrestricted. These default actions means that a program with a restricted license pragma will automatically get warnings if a GPL unit is inappropriately ``with``\ ed. For example, the program: .. code-block:: ada with Sem_Ch3; with GNAT.Sockets; procedure Secret_Stuff is ... end Secret_Stuff if compiled with pragma ``License`` (``Restricted``) in a :file:`gnat.adc` file will generate the warning:: 1. with Sem_Ch3; | >>> license of withed unit "Sem_Ch3" is incompatible 2. with GNAT.Sockets; 3. procedure Secret_Stuff is Here we get a warning on ``Sem_Ch3`` since it is part of the GNAT compiler and is licensed under the GPL, but no warning for ``GNAT.Sockets`` which is part of the GNAT run time, and is therefore licensed under the modified GPL. Pragma Link_With ================ Syntax: :: pragma Link_With (static_string_EXPRESSION {,static_string_EXPRESSION}); This pragma is provided for compatibility with certain Ada 83 compilers. It has exactly the same effect as pragma ``Linker_Options`` except that spaces occurring within one of the string expressions are treated as separators. For example, in the following case: .. code-block:: ada pragma Link_With ("-labc -ldef"); results in passing the strings ``-labc`` and ``-ldef`` as two separate arguments to the linker. In addition pragma Link_With allows multiple arguments, with the same effect as successive pragmas. Pragma Linker_Alias =================== Syntax: :: pragma Linker_Alias ( [Entity =>] LOCAL_NAME, [Target =>] static_string_EXPRESSION); ``LOCAL_NAME`` must refer to an object that is declared at the library level. This pragma establishes the given entity as a linker alias for the given target. It is equivalent to ``__attribute__((alias))`` in GNU C and causes ``LOCAL_NAME`` to be emitted as an alias for the symbol ``static_string_EXPRESSION`` in the object file, that is to say no space is reserved for ``LOCAL_NAME`` by the assembler and it will be resolved to the same address as ``static_string_EXPRESSION`` by the linker. The actual linker name for the target must be used (e.g., the fully encoded name with qualification in Ada, or the mangled name in C++), or it must be declared using the C convention with ``pragma Import`` or ``pragma Export``. Not all target machines support this pragma. On some of them it is accepted only if ``pragma Weak_External`` has been applied to ``LOCAL_NAME``. .. code-block:: ada -- Example of the use of pragma Linker_Alias package p is i : Integer := 1; pragma Export (C, i); new_name_for_i : Integer; pragma Linker_Alias (new_name_for_i, "i"); end p; Pragma Linker_Constructor ========================= Syntax: .. code-block:: ada pragma Linker_Constructor (procedure_LOCAL_NAME); ``procedure_LOCAL_NAME`` must refer to a parameterless procedure that is declared at the library level. A procedure to which this pragma is applied will be treated as an initialization routine by the linker. It is equivalent to ``__attribute__((constructor))`` in GNU C and causes ``procedure_LOCAL_NAME`` to be invoked before the entry point of the executable is called (or immediately after the shared library is loaded if the procedure is linked in a shared library), in particular before the Ada run-time environment is set up. Because of these specific contexts, the set of operations such a procedure can perform is very limited and the type of objects it can manipulate is essentially restricted to the elementary types. In particular, it must only contain code to which pragma Restrictions (No_Elaboration_Code) applies. This pragma is used by GNAT to implement auto-initialization of shared Stand Alone Libraries, which provides a related capability without the restrictions listed above. Where possible, the use of Stand Alone Libraries is preferable to the use of this pragma. Pragma Linker_Destructor ======================== Syntax: .. code-block:: ada pragma Linker_Destructor (procedure_LOCAL_NAME); ``procedure_LOCAL_NAME`` must refer to a parameterless procedure that is declared at the library level. A procedure to which this pragma is applied will be treated as a finalization routine by the linker. It is equivalent to ``__attribute__((destructor))`` in GNU C and causes ``procedure_LOCAL_NAME`` to be invoked after the entry point of the executable has exited (or immediately before the shared library is unloaded if the procedure is linked in a shared library), in particular after the Ada run-time environment is shut down. See ``pragma Linker_Constructor`` for the set of restrictions that apply because of these specific contexts. .. _Pragma-Linker_Section: Pragma Linker_Section ===================== Syntax: :: pragma Linker_Section ( [Entity =>] LOCAL_NAME, [Section =>] static_string_EXPRESSION); ``LOCAL_NAME`` must refer to an object, type, or subprogram that is declared at the library level. This pragma specifies the name of the linker section for the given entity. It is equivalent to ``__attribute__((section))`` in GNU C and causes ``LOCAL_NAME`` to be placed in the ``static_string_EXPRESSION`` section of the executable (assuming the linker doesn't rename the section). GNAT also provides an implementation defined aspect of the same name. In the case of specifying this aspect for a type, the effect is to specify the corresponding section for all library-level objects of the type that do not have an explicit linker section set. Note that this only applies to whole objects, not to components of composite objects. In the case of a subprogram, the linker section applies to all previously declared matching overloaded subprograms in the current declarative part which do not already have a linker section assigned. The linker section aspect is useful in this case for specifying different linker sections for different elements of such an overloaded set. Note that an empty string specifies that no linker section is specified. This is not quite the same as omitting the pragma or aspect, since it can be used to specify that one element of an overloaded set of subprograms has the default linker section, or that one object of a type for which a linker section is specified should has the default linker section. The compiler normally places library-level entities in standard sections depending on the class: procedures and functions generally go in the ``.text`` section, initialized variables in the ``.data`` section and uninitialized variables in the ``.bss`` section. Other, special sections may exist on given target machines to map special hardware, for example I/O ports or flash memory. This pragma is a means to defer the final layout of the executable to the linker, thus fully working at the symbolic level with the compiler. Some file formats do not support arbitrary sections so not all target machines support this pragma. The use of this pragma may cause a program execution to be erroneous if it is used to place an entity into an inappropriate section (e.g., a modified variable into the ``.text`` section). See also ``pragma Persistent_BSS``. .. code-block:: ada -- Example of the use of pragma Linker_Section package IO_Card is Port_A : Integer; pragma Volatile (Port_A); pragma Linker_Section (Port_A, ".bss.port_a"); Port_B : Integer; pragma Volatile (Port_B); pragma Linker_Section (Port_B, ".bss.port_b"); type Port_Type is new Integer with Linker_Section => ".bss"; PA : Port_Type with Linker_Section => ".bss.PA"; PB : Port_Type; -- ends up in linker section ".bss" procedure Q with Linker_Section => "Qsection"; end IO_Card; .. _Pragma-Lock_Free: Pragma Lock_Free ================ Syntax: .. code-block:: ada pragma Lock_Free [ (static_boolean_EXPRESSION) ]; This pragma may be specified for protected types or objects. It specifies that the implementation of protected operations must be implemented without locks. Compilation fails if the compiler cannot generate lock-free code for the operations. The current conditions required to support this pragma are: * Protected type declarations may not contain entries * Protected subprogram declarations may not have nonelementary parameters In addition, each protected subprogram body must satisfy: * May reference only one protected component * May not reference nonconstant entities outside the protected subprogram scope * May not contain address representation items, allocators, or quantified expressions * May not contain delay, goto, loop, or procedure-call statements * May not contain exported and imported entities * May not dereferenced access values * Function calls and attribute references must be static If the Lock_Free aspect is specified to be True for a protected unit and the Ceiling_Locking locking policy is in effect, then the run-time actions associated with the Ceiling_Locking locking policy (described in Ada RM D.3) are not performed when a protected operation of the protected unit is executed. Pragma Loop_Invariant ===================== Syntax: .. code-block:: ada pragma Loop_Invariant ( boolean_EXPRESSION ); The effect of this pragma is similar to that of pragma ``Assert``, except that in an ``Assertion_Policy`` pragma, the identifier ``Loop_Invariant`` is used to control whether it is ignored or checked (or disabled). ``Loop_Invariant`` can only appear as one of the items in the sequence of statements of a loop body, or nested inside block statements that appear in the sequence of statements of a loop body. The intention is that it be used to represent a "loop invariant" assertion, i.e. something that is true each time through the loop, and which can be used to show that the loop is achieving its purpose. Multiple ``Loop_Invariant`` and ``Loop_Variant`` pragmas that apply to the same loop should be grouped in the same sequence of statements. To aid in writing such invariants, the special attribute ``Loop_Entry`` may be used to refer to the value of an expression on entry to the loop. This attribute can only be used within the expression of a ``Loop_Invariant`` pragma. For full details, see documentation of attribute ``Loop_Entry``. Pragma Loop_Optimize ==================== Syntax: :: pragma Loop_Optimize (OPTIMIZATION_HINT {, OPTIMIZATION_HINT}); OPTIMIZATION_HINT ::= Ivdep | No_Unroll | Unroll | No_Vector | Vector This pragma must appear immediately within a loop statement. It allows the programmer to specify optimization hints for the enclosing loop. The hints are not mutually exclusive and can be freely mixed, but not all combinations will yield a sensible outcome. There are five supported optimization hints for a loop: * Ivdep The programmer asserts that there are no loop-carried dependencies which would prevent consecutive iterations of the loop from being executed simultaneously. * No_Unroll The loop must not be unrolled. This is a strong hint: the compiler will not unroll a loop marked with this hint. * Unroll The loop should be unrolled. This is a weak hint: the compiler will try to apply unrolling to this loop preferably to other optimizations, notably vectorization, but there is no guarantee that the loop will be unrolled. * No_Vector The loop must not be vectorized. This is a strong hint: the compiler will not vectorize a loop marked with this hint. * Vector The loop should be vectorized. This is a weak hint: the compiler will try to apply vectorization to this loop preferably to other optimizations, notably unrolling, but there is no guarantee that the loop will be vectorized. These hints do not remove the need to pass the appropriate switches to the compiler in order to enable the relevant optimizations, that is to say *-funroll-loops* for unrolling and *-ftree-vectorize* for vectorization. Pragma Loop_Variant =================== Syntax: :: pragma Loop_Variant ( LOOP_VARIANT_ITEM {, LOOP_VARIANT_ITEM } ); LOOP_VARIANT_ITEM ::= CHANGE_DIRECTION => discrete_EXPRESSION CHANGE_DIRECTION ::= Increases | Decreases ``Loop_Variant`` can only appear as one of the items in the sequence of statements of a loop body, or nested inside block statements that appear in the sequence of statements of a loop body. It allows the specification of quantities which must always decrease or increase in successive iterations of the loop. In its simplest form, just one expression is specified, whose value must increase or decrease on each iteration of the loop. In a more complex form, multiple arguments can be given which are interpreted in a nesting lexicographic manner. For example: .. code-block:: ada pragma Loop_Variant (Increases => X, Decreases => Y); specifies that each time through the loop either X increases, or X stays the same and Y decreases. A ``Loop_Variant`` pragma ensures that the loop is making progress. It can be useful in helping to show informally or prove formally that the loop always terminates. ``Loop_Variant`` is an assertion whose effect can be controlled using an ``Assertion_Policy`` with a check name of ``Loop_Variant``. The policy can be ``Check`` to enable the loop variant check, ``Ignore`` to ignore the check (in which case the pragma has no effect on the program), or ``Disable`` in which case the pragma is not even checked for correct syntax. Multiple ``Loop_Invariant`` and ``Loop_Variant`` pragmas that apply to the same loop should be grouped in the same sequence of statements. The ``Loop_Entry`` attribute may be used within the expressions of the ``Loop_Variant`` pragma to refer to values on entry to the loop. Pragma Machine_Attribute ======================== Syntax: :: pragma Machine_Attribute ( [Entity =>] LOCAL_NAME, [Attribute_Name =>] static_string_EXPRESSION [, [Info =>] static_EXPRESSION {, static_EXPRESSION}] ); Machine-dependent attributes can be specified for types and/or declarations. This pragma is semantically equivalent to :samp:`__attribute__(({attribute_name}))` (if ``info`` is not specified) or :samp:`__attribute__(({attribute_name(info})))` or :samp:`__attribute__(({attribute_name(info,...})))` in GNU C, where *attribute_name* is recognized by the compiler middle-end or the ``TARGET_ATTRIBUTE_TABLE`` machine specific macro. Note that a string literal for the optional parameter ``info`` or the following ones is transformed by default into an identifier, which may make this pragma unusable for some attributes. For further information see :title:`GNU Compiler Collection (GCC) Internals`. Pragma Main =========== Syntax:: pragma Main (MAIN_OPTION [, MAIN_OPTION]); MAIN_OPTION ::= [Stack_Size =>] static_integer_EXPRESSION | [Task_Stack_Size_Default =>] static_integer_EXPRESSION | [Time_Slicing_Enabled =>] static_boolean_EXPRESSION This pragma is provided for compatibility with OpenVMS VAX Systems. It has no effect in GNAT, other than being syntax checked. Pragma Main_Storage =================== Syntax:: pragma Main_Storage (MAIN_STORAGE_OPTION [, MAIN_STORAGE_OPTION]); MAIN_STORAGE_OPTION ::= [WORKING_STORAGE =>] static_SIMPLE_EXPRESSION | [TOP_GUARD =>] static_SIMPLE_EXPRESSION This pragma is provided for compatibility with OpenVMS VAX Systems. It has no effect in GNAT, other than being syntax checked. .. _Pragma-Max_Queue_Length: Pragma Max_Queue_Length ======================= Syntax:: pragma Max_Queue_Length (static_integer_EXPRESSION); This pragma is used to specify the maximum callers per entry queue for individual protected entries and entry families. It accepts a single integer (-1 or more) as a parameter and must appear after the declaration of an entry. A value of -1 represents no additional restriction on queue length. Pragma No_Body ============== Syntax: .. code-block:: ada pragma No_Body; There are a number of cases in which a package spec does not require a body, and in fact a body is not permitted. GNAT will not permit the spec to be compiled if there is a body around. The pragma No_Body allows you to provide a body file, even in a case where no body is allowed. The body file must contain only comments and a single No_Body pragma. This is recognized by the compiler as indicating that no body is logically present. This is particularly useful during maintenance when a package is modified in such a way that a body needed before is no longer needed. The provision of a dummy body with a No_Body pragma ensures that there is no interference from earlier versions of the package body. .. _Pragma-No_Caching: Pragma No_Caching ================= Syntax: .. code-block:: ada pragma No_Caching [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``No_Caching`` in the SPARK 2014 Reference Manual, section 7.1.2. Pragma No_Component_Reordering ============================== Syntax: :: pragma No_Component_Reordering [([Entity =>] type_LOCAL_NAME)]; ``type_LOCAL_NAME`` must refer to a record type declaration in the current declarative part. The effect is to preclude any reordering of components for the layout of the record, i.e. the record is laid out by the compiler in the order in which the components are declared textually. The form with no argument is a configuration pragma which applies to all record types declared in units to which the pragma applies and there is a requirement that this pragma be used consistently within a partition. .. _Pragma-No_Elaboration_Code_All: Pragma No_Elaboration_Code_All ============================== Syntax: :: pragma No_Elaboration_Code_All [(program_unit_NAME)]; This is a program unit pragma (there is also an equivalent aspect of the same name) that establishes the restriction ``No_Elaboration_Code`` for the current unit and any extended main source units (body and subunits). It also has the effect of enforcing a transitive application of this aspect, so that if any unit is implicitly or explicitly with'ed by the current unit, it must also have the `No_Elaboration_Code_All` aspect set. It may be applied to package or subprogram specs or their generic versions. Pragma No_Heap_Finalization =========================== Syntax: :: pragma No_Heap_Finalization [ (first_subtype_LOCAL_NAME) ]; Pragma ``No_Heap_Finalization`` may be used as a configuration pragma or as a type-specific pragma. In its configuration form, the pragma must appear within a configuration file such as gnat.adc, without an argument. The pragma suppresses the call to ``Finalize`` for heap-allocated objects created through library-level named access-to-object types in cases where the designated type requires finalization actions. In its type-specific form, the argument of the pragma must denote a library-level named access-to-object type. The pragma suppresses the call to ``Finalize`` for heap-allocated objects created through the specific access type in cases where the designated type requires finalization actions. It is still possible to finalize such heap-allocated objects by explicitly deallocating them. A library-level named access-to-object type declared within a generic unit will lose its ``No_Heap_Finalization`` pragma when the corresponding instance does not appear at the library level. .. _Pragma-No_Inline: Pragma No_Inline ================ Syntax: :: pragma No_Inline (NAME {, NAME}); This pragma suppresses inlining for the callable entity or the instances of the generic subprogram designated by ``NAME``, including inlining that results from the use of pragma ``Inline``. This pragma is always active, in particular it is not subject to the use of option *-gnatn* or *-gnatN*. It is illegal to specify both pragma ``No_Inline`` and pragma ``Inline_Always`` for the same ``NAME``. Pragma No_Return ================ Syntax: :: pragma No_Return (procedure_LOCAL_NAME {, procedure_LOCAL_NAME}); Each ``procedure_LOCAL_NAME`` argument must refer to one or more procedure declarations in the current declarative part. A procedure to which this pragma is applied may not contain any explicit ``return`` statements. In addition, if the procedure contains any implicit returns from falling off the end of a statement sequence, then execution of that implicit return will cause Program_Error to be raised. One use of this pragma is to identify procedures whose only purpose is to raise an exception. Another use of this pragma is to suppress incorrect warnings about missing returns in functions, where the last statement of a function statement sequence is a call to such a procedure. Note that in Ada 2005 mode, this pragma is part of the language. It is available in all earlier versions of Ada as an implementation-defined pragma. Pragma No_Strict_Aliasing ========================= Syntax: :: pragma No_Strict_Aliasing [([Entity =>] type_LOCAL_NAME)]; ``type_LOCAL_NAME`` must refer to an access type declaration in the current declarative part. The effect is to inhibit strict aliasing optimization for the given type. The form with no arguments is a configuration pragma which applies to all access types declared in units to which the pragma applies. For a detailed description of the strict aliasing optimization, and the situations in which it must be suppressed, see the section on Optimization and Strict Aliasing in the :title:`GNAT User's Guide`. This pragma currently has no effects on access to unconstrained array types. .. _Pragma-No_Tagged_Streams: Pragma No_Tagged_Streams ======================== Syntax: :: pragma No_Tagged_Streams [([Entity =>] tagged_type_LOCAL_NAME)]; Normally when a tagged type is introduced using a full type declaration, part of the processing includes generating stream access routines to be used by stream attributes referencing the type (or one of its subtypes or derived types). This can involve the generation of significant amounts of code which is wasted space if stream routines are not needed for the type in question. The ``No_Tagged_Streams`` pragma causes the generation of these stream routines to be skipped, and any attempt to use stream operations on types subject to this pragma will be statically rejected as illegal. There are two forms of the pragma. The form with no arguments must appear in a declarative sequence or in the declarations of a package spec. This pragma affects all subsequent root tagged types declared in the declaration sequence, and specifies that no stream routines be generated. The form with an argument (for which there is also a corresponding aspect) specifies a single root tagged type for which stream routines are not to be generated. Once the pragma has been given for a particular root tagged type, all subtypes and derived types of this type inherit the pragma automatically, so the effect applies to a complete hierarchy (this is necessary to deal with the class-wide dispatching versions of the stream routines). When pragmas ``Discard_Names`` and ``No_Tagged_Streams`` are simultaneously applied to a tagged type its Expanded_Name and External_Tag are initialized with empty strings. This is useful to avoid exposing entity names at binary level but has a negative impact on the debuggability of tagged types. Pragma Normalize_Scalars ======================== Syntax: .. code-block:: ada pragma Normalize_Scalars; This is a language defined pragma which is fully implemented in GNAT. The effect is to cause all scalar objects that are not otherwise initialized to be initialized. The initial values are implementation dependent and are as follows: *Standard.Character* Objects whose root type is Standard.Character are initialized to Character'Last unless the subtype range excludes NUL (in which case NUL is used). This choice will always generate an invalid value if one exists. *Standard.Wide_Character* Objects whose root type is Standard.Wide_Character are initialized to Wide_Character'Last unless the subtype range excludes NUL (in which case NUL is used). This choice will always generate an invalid value if one exists. *Standard.Wide_Wide_Character* Objects whose root type is Standard.Wide_Wide_Character are initialized to the invalid value 16#FFFF_FFFF# unless the subtype range excludes NUL (in which case NUL is used). This choice will always generate an invalid value if one exists. *Integer types* Objects of an integer type are treated differently depending on whether negative values are present in the subtype. If no negative values are present, then all one bits is used as the initial value except in the special case where zero is excluded from the subtype, in which case all zero bits are used. This choice will always generate an invalid value if one exists. For subtypes with negative values present, the largest negative number is used, except in the unusual case where this largest negative number is in the subtype, and the largest positive number is not, in which case the largest positive value is used. This choice will always generate an invalid value if one exists. *Floating-Point Types* Objects of all floating-point types are initialized to all 1-bits. For standard IEEE format, this corresponds to a NaN (not a number) which is indeed an invalid value. *Fixed-Point Types* Objects of all fixed-point types are treated as described above for integers, with the rules applying to the underlying integer value used to represent the fixed-point value. *Modular types* Objects of a modular type are initialized to all one bits, except in the special case where zero is excluded from the subtype, in which case all zero bits are used. This choice will always generate an invalid value if one exists. *Enumeration types* Objects of an enumeration type are initialized to all one-bits, i.e., to the value ``2 ** typ'Size - 1`` unless the subtype excludes the literal whose Pos value is zero, in which case a code of zero is used. This choice will always generate an invalid value if one exists. .. _Pragma_Obsolescent: Pragma Obsolescent ================== Syntax: :: pragma Obsolescent; pragma Obsolescent ( [Message =>] static_string_EXPRESSION [,[Version =>] Ada_05]); pragma Obsolescent ( [Entity =>] NAME [,[Message =>] static_string_EXPRESSION [,[Version =>] Ada_05]]); This pragma can occur immediately following a declaration of an entity, including the case of a record component. If no Entity argument is present, then this declaration is the one to which the pragma applies. If an Entity parameter is present, it must either match the name of the entity in this declaration, or alternatively, the pragma can immediately follow an enumeration type declaration, where the Entity argument names one of the enumeration literals. This pragma is used to indicate that the named entity is considered obsolescent and should not be used. Typically this is used when an API must be modified by eventually removing or modifying existing subprograms or other entities. The pragma can be used at an intermediate stage when the entity is still present, but will be removed later. The effect of this pragma is to output a warning message on a reference to an entity thus marked that the subprogram is obsolescent if the appropriate warning option in the compiler is activated. If the ``Message`` parameter is present, then a second warning message is given containing this text. In addition, a reference to the entity is considered to be a violation of pragma ``Restrictions (No_Obsolescent_Features)``. This pragma can also be used as a program unit pragma for a package, in which case the entity name is the name of the package, and the pragma indicates that the entire package is considered obsolescent. In this case a client ``with``\ ing such a package violates the restriction, and the ``with`` clause is flagged with warnings if the warning option is set. If the ``Version`` parameter is present (which must be exactly the identifier ``Ada_05``, no other argument is allowed), then the indication of obsolescence applies only when compiling in Ada 2005 mode. This is primarily intended for dealing with the situations in the predefined library where subprograms or packages have become defined as obsolescent in Ada 2005 (e.g., in ``Ada.Characters.Handling``), but may be used anywhere. The following examples show typical uses of this pragma: .. code-block:: ada package p is pragma Obsolescent (p, Message => "use pp instead of p"); end p; package q is procedure q2; pragma Obsolescent ("use q2new instead"); type R is new integer; pragma Obsolescent (Entity => R, Message => "use RR in Ada 2005", Version => Ada_05); type M is record F1 : Integer; F2 : Integer; pragma Obsolescent; F3 : Integer; end record; type E is (a, bc, 'd', quack); pragma Obsolescent (Entity => bc) pragma Obsolescent (Entity => 'd') function "+" (a, b : character) return character; pragma Obsolescent (Entity => "+"); end; Note that, as for all pragmas, if you use a pragma argument identifier, then all subsequent parameters must also use a pragma argument identifier. So if you specify ``Entity =>`` for the ``Entity`` argument, and a ``Message`` argument is present, it must be preceded by ``Message =>``. Pragma Optimize_Alignment ========================= .. index:: Alignment, default settings Syntax: .. code-block:: ada pragma Optimize_Alignment (TIME | SPACE | OFF); This is a configuration pragma which affects the choice of default alignments for types and objects where no alignment is explicitly specified. There is a time/space trade-off in the selection of these values. Large alignments result in more efficient code, at the expense of larger data space, since sizes have to be increased to match these alignments. Smaller alignments save space, but the access code is slower. The normal choice of default alignments for types and individual alignment promotions for objects (which is what you get if you do not use this pragma, or if you use an argument of OFF), tries to balance these two requirements. Specifying SPACE causes smaller default alignments to be chosen in two cases. First any packed record is given an alignment of 1. Second, if a size is given for the type, then the alignment is chosen to avoid increasing this size. For example, consider: .. code-block:: ada type R is record X : Integer; Y : Character; end record; for R'Size use 5*8; In the default mode, this type gets an alignment of 4, so that access to the Integer field X are efficient. But this means that objects of the type end up with a size of 8 bytes. This is a valid choice, since sizes of objects are allowed to be bigger than the size of the type, but it can waste space if for example fields of type R appear in an enclosing record. If the above type is compiled in ``Optimize_Alignment (Space)`` mode, the alignment is set to 1. However, there is one case in which SPACE is ignored. If a variable length record (that is a discriminated record with a component which is an array whose length depends on a discriminant), has a pragma Pack, then it is not in general possible to set the alignment of such a record to one, so the pragma is ignored in this case (with a warning). Specifying SPACE also disables alignment promotions for standalone objects, which occur when the compiler increases the alignment of a specific object without changing the alignment of its type. Specifying SPACE also disables component reordering in unpacked record types, which can result in larger sizes in order to meet alignment requirements. Specifying TIME causes larger default alignments to be chosen in the case of small types with sizes that are not a power of 2. For example, consider: .. code-block:: ada type R is record A : Character; B : Character; C : Boolean; end record; pragma Pack (R); for R'Size use 17; The default alignment for this record is normally 1, but if this type is compiled in ``Optimize_Alignment (Time)`` mode, then the alignment is set to 4, which wastes space for objects of the type, since they are now 4 bytes long, but results in more efficient access when the whole record is referenced. As noted above, this is a configuration pragma, and there is a requirement that all units in a partition be compiled with a consistent setting of the optimization setting. This would normally be achieved by use of a configuration pragma file containing the appropriate setting. The exception to this rule is that units with an explicit configuration pragma in the same file as the source unit are excluded from the consistency check, as are all predefined units. The latter are compiled by default in pragma Optimize_Alignment (Off) mode if no pragma appears at the start of the file. Pragma Ordered ============== Syntax: .. code-block:: ada pragma Ordered (enumeration_first_subtype_LOCAL_NAME); Most enumeration types are from a conceptual point of view unordered. For example, consider: .. code-block:: ada type Color is (Red, Blue, Green, Yellow); By Ada semantics ``Blue > Red`` and ``Green > Blue``, but really these relations make no sense; the enumeration type merely specifies a set of possible colors, and the order is unimportant. For unordered enumeration types, it is generally a good idea if clients avoid comparisons (other than equality or inequality) and explicit ranges. (A *client* is a unit where the type is referenced, other than the unit where the type is declared, its body, and its subunits.) For example, if code buried in some client says: .. code-block:: ada if Current_Color < Yellow then ... if Current_Color in Blue .. Green then ... then the client code is relying on the order, which is undesirable. It makes the code hard to read and creates maintenance difficulties if entries have to be added to the enumeration type. Instead, the code in the client should list the possibilities, or an appropriate subtype should be declared in the unit that declares the original enumeration type. E.g., the following subtype could be declared along with the type ``Color``: .. code-block:: ada subtype RBG is Color range Red .. Green; and then the client could write: .. code-block:: ada if Current_Color in RBG then ... if Current_Color = Blue or Current_Color = Green then ... However, some enumeration types are legitimately ordered from a conceptual point of view. For example, if you declare: .. code-block:: ada type Day is (Mon, Tue, Wed, Thu, Fri, Sat, Sun); then the ordering imposed by the language is reasonable, and clients can depend on it, writing for example: .. code-block:: ada if D in Mon .. Fri then ... if D < Wed then ... The pragma *Ordered* is provided to mark enumeration types that are conceptually ordered, alerting the reader that clients may depend on the ordering. GNAT provides a pragma to mark enumerations as ordered rather than one to mark them as unordered, since in our experience, the great majority of enumeration types are conceptually unordered. The types ``Boolean``, ``Character``, ``Wide_Character``, and ``Wide_Wide_Character`` are considered to be ordered types, so each is declared with a pragma ``Ordered`` in package ``Standard``. Normally pragma ``Ordered`` serves only as documentation and a guide for coding standards, but GNAT provides a warning switch *-gnatw.u* that requests warnings for inappropriate uses (comparisons and explicit subranges) for unordered types. If this switch is used, then any enumeration type not marked with pragma ``Ordered`` will be considered as unordered, and will generate warnings for inappropriate uses. Note that generic types are not considered ordered or unordered (since the template can be instantiated for both cases), so we never generate warnings for the case of generic enumerated types. For additional information please refer to the description of the *-gnatw.u* switch in the GNAT User's Guide. Pragma Overflow_Mode ==================== Syntax: :: pragma Overflow_Mode ( [General =>] MODE [,[Assertions =>] MODE]); MODE ::= STRICT | MINIMIZED | ELIMINATED This pragma sets the current overflow mode to the given setting. For details of the meaning of these modes, please refer to the 'Overflow Check Handling in GNAT' appendix in the GNAT User's Guide. If only the ``General`` parameter is present, the given mode applies to all expressions. If both parameters are present, the ``General`` mode applies to expressions outside assertions, and the ``Eliminated`` mode applies to expressions within assertions. The case of the ``MODE`` parameter is ignored, so ``MINIMIZED``, ``Minimized`` and ``minimized`` all have the same effect. The ``Overflow_Mode`` pragma has the same scoping and placement rules as pragma ``Suppress``, so it can occur either as a configuration pragma, specifying a default for the whole program, or in a declarative scope, where it applies to the remaining declarations and statements in that scope. The pragma ``Suppress (Overflow_Check)`` suppresses overflow checking, but does not affect the overflow mode. The pragma ``Unsuppress (Overflow_Check)`` unsuppresses (enables) overflow checking, but does not affect the overflow mode. Pragma Overriding_Renamings =========================== .. index:: Rational profile .. index:: Rational compatibility Syntax: .. code-block:: ada pragma Overriding_Renamings; This is a GNAT configuration pragma to simplify porting legacy code accepted by the Rational Ada compiler. In the presence of this pragma, a renaming declaration that renames an inherited operation declared in the same scope is legal if selected notation is used as in: .. code-block:: ada pragma Overriding_Renamings; ... package R is function F (..); ... function F (..) renames R.F; end R; even though RM 8.3 (15) stipulates that an overridden operation is not visible within the declaration of the overriding operation. .. _Pragma-Part_Of: Pragma Part_Of ============== Syntax: .. code-block:: ada pragma Part_Of (ABSTRACT_STATE); ABSTRACT_STATE ::= NAME For the semantics of this pragma, see the entry for aspect ``Part_Of`` in the SPARK 2014 Reference Manual, section 7.2.6. Pragma Partition_Elaboration_Policy =================================== Syntax: :: pragma Partition_Elaboration_Policy (POLICY_IDENTIFIER); POLICY_IDENTIFIER ::= Concurrent | Sequential This pragma is standard in Ada 2005, but is available in all earlier versions of Ada as an implementation-defined pragma. See Ada 2012 Reference Manual for details. Pragma Passive ============== Syntax: :: pragma Passive [(Semaphore | No)]; Syntax checked, but otherwise ignored by GNAT. This is recognized for compatibility with DEC Ada 83 implementations, where it is used within a task definition to request that a task be made passive. If the argument ``Semaphore`` is present, or the argument is omitted, then DEC Ada 83 treats the pragma as an assertion that the containing task is passive and that optimization of context switch with this task is permitted and desired. If the argument ``No`` is present, the task must not be optimized. GNAT does not attempt to optimize any tasks in this manner (since protected objects are available in place of passive tasks). For more information on the subject of passive tasks, see the section 'Passive Task Optimization' in the GNAT Users Guide. .. _Pragma-Persistent_BSS: Pragma Persistent_BSS ===================== Syntax: :: pragma Persistent_BSS [(object_LOCAL_NAME)] This pragma allows selected objects to be placed in the ``.persistent_bss`` section. On some targets the linker and loader provide for special treatment of this section, allowing a program to be reloaded without affecting the contents of this data (hence the name persistent). There are two forms of usage. If an argument is given, it must be the local name of a library-level object, with no explicit initialization and whose type is potentially persistent. If no argument is given, then the pragma is a configuration pragma, and applies to all library-level objects with no explicit initialization of potentially persistent types. A potentially persistent type is a scalar type, or an untagged, non-discriminated record, all of whose components have no explicit initialization and are themselves of a potentially persistent type, or an array, all of whose constraints are static, and whose component type is potentially persistent. If this pragma is used on a target where this feature is not supported, then the pragma will be ignored. See also ``pragma Linker_Section``. Pragma Post =========== .. index:: Post .. index:: Checks, postconditions Syntax: .. code-block:: ada pragma Post (Boolean_Expression); The ``Post`` pragma is intended to be an exact replacement for the language-defined ``Post`` aspect, and shares its restrictions and semantics. It must appear either immediately following the corresponding subprogram declaration (only other pragmas may intervene), or if there is no separate subprogram declaration, then it can appear at the start of the declarations in a subprogram body (preceded only by other pragmas). Pragma Postcondition ==================== .. index:: Postcondition .. index:: Checks, postconditions Syntax: :: pragma Postcondition ( [Check =>] Boolean_Expression [,[Message =>] String_Expression]); The ``Postcondition`` pragma allows specification of automatic postcondition checks for subprograms. These checks are similar to assertions, but are automatically inserted just prior to the return statements of the subprogram with which they are associated (including implicit returns at the end of procedure bodies and associated exception handlers). In addition, the boolean expression which is the condition which must be true may contain references to function'Result in the case of a function to refer to the returned value. ``Postcondition`` pragmas may appear either immediately following the (separate) declaration of a subprogram, or at the start of the declarations of a subprogram body. Only other pragmas may intervene (that is appear between the subprogram declaration and its postconditions, or appear before the postcondition in the declaration sequence in a subprogram body). In the case of a postcondition appearing after a subprogram declaration, the formal arguments of the subprogram are visible, and can be referenced in the postcondition expressions. The postconditions are collected and automatically tested just before any return (implicit or explicit) in the subprogram body. A postcondition is only recognized if postconditions are active at the time the pragma is encountered. The compiler switch *gnata* turns on all postconditions by default, and pragma ``Check_Policy`` with an identifier of ``Postcondition`` can also be used to control whether postconditions are active. The general approach is that postconditions are placed in the spec if they represent functional aspects which make sense to the client. For example we might have: .. code-block:: ada function Direction return Integer; pragma Postcondition (Direction'Result = +1 or else Direction'Result = -1); which serves to document that the result must be +1 or -1, and will test that this is the case at run time if postcondition checking is active. Postconditions within the subprogram body can be used to check that some internal aspect of the implementation, not visible to the client, is operating as expected. For instance if a square root routine keeps an internal counter of the number of times it is called, then we might have the following postcondition: .. code-block:: ada Sqrt_Calls : Natural := 0; function Sqrt (Arg : Float) return Float is pragma Postcondition (Sqrt_Calls = Sqrt_Calls'Old + 1); ... end Sqrt As this example, shows, the use of the ``Old`` attribute is often useful in postconditions to refer to the state on entry to the subprogram. Note that postconditions are only checked on normal returns from the subprogram. If an abnormal return results from raising an exception, then the postconditions are not checked. If a postcondition fails, then the exception ``System.Assertions.Assert_Failure`` is raised. If a message argument was supplied, then the given string will be used as the exception message. If no message argument was supplied, then the default message has the form "Postcondition failed at file_name:line". The exception is raised in the context of the subprogram body, so it is possible to catch postcondition failures within the subprogram body itself. Within a package spec, normal visibility rules in Ada would prevent forward references within a postcondition pragma to functions defined later in the same package. This would introduce undesirable ordering constraints. To avoid this problem, all postcondition pragmas are analyzed at the end of the package spec, allowing forward references. The following example shows that this even allows mutually recursive postconditions as in: .. code-block:: ada package Parity_Functions is function Odd (X : Natural) return Boolean; pragma Postcondition (Odd'Result = (x = 1 or else (x /= 0 and then Even (X - 1)))); function Even (X : Natural) return Boolean; pragma Postcondition (Even'Result = (x = 0 or else (x /= 1 and then Odd (X - 1)))); end Parity_Functions; There are no restrictions on the complexity or form of conditions used within ``Postcondition`` pragmas. The following example shows that it is even possible to verify performance behavior. .. code-block:: ada package Sort is Performance : constant Float; -- Performance constant set by implementation -- to match target architecture behavior. procedure Treesort (Arg : String); -- Sorts characters of argument using N*logN sort pragma Postcondition (Float (Clock - Clock'Old) <= Float (Arg'Length) * log (Float (Arg'Length)) * Performance); end Sort; Note: postcondition pragmas associated with subprograms that are marked as Inline_Always, or those marked as Inline with front-end inlining (-gnatN option set) are accepted and legality-checked by the compiler, but are ignored at run-time even if postcondition checking is enabled. Note that pragma ``Postcondition`` differs from the language-defined ``Post`` aspect (and corresponding ``Post`` pragma) in allowing multiple occurrences, allowing occurences in the body even if there is a separate spec, and allowing a second string parameter, and the use of the pragma identifier ``Check``. Historically, pragma ``Postcondition`` was implemented prior to the development of Ada 2012, and has been retained in its original form for compatibility purposes. Pragma Post_Class ================= .. index:: Post .. index:: Checks, postconditions Syntax: .. code-block:: ada pragma Post_Class (Boolean_Expression); The ``Post_Class`` pragma is intended to be an exact replacement for the language-defined ``Post'Class`` aspect, and shares its restrictions and semantics. It must appear either immediately following the corresponding subprogram declaration (only other pragmas may intervene), or if there is no separate subprogram declaration, then it can appear at the start of the declarations in a subprogram body (preceded only by other pragmas). Note: This pragma is called ``Post_Class`` rather than ``Post'Class`` because the latter would not be strictly conforming to the allowed syntax for pragmas. The motivation for providing pragmas equivalent to the aspects is to allow a program to be written using the pragmas, and then compiled if necessary using an Ada compiler that does not recognize the pragmas or aspects, but is prepared to ignore the pragmas. The assertion policy that controls this pragma is ``Post'Class``, not ``Post_Class``. Pragma Pre ========== .. index:: Pre .. index:: Checks, preconditions Syntax: .. code-block:: ada pragma Pre (Boolean_Expression); The ``Pre`` pragma is intended to be an exact replacement for the language-defined ``Pre`` aspect, and shares its restrictions and semantics. It must appear either immediately following the corresponding subprogram declaration (only other pragmas may intervene), or if there is no separate subprogram declaration, then it can appear at the start of the declarations in a subprogram body (preceded only by other pragmas). Pragma Precondition =================== .. index:: Preconditions .. index:: Checks, preconditions Syntax: :: pragma Precondition ( [Check =>] Boolean_Expression [,[Message =>] String_Expression]); The ``Precondition`` pragma is similar to ``Postcondition`` except that the corresponding checks take place immediately upon entry to the subprogram, and if a precondition fails, the exception is raised in the context of the caller, and the attribute 'Result cannot be used within the precondition expression. Otherwise, the placement and visibility rules are identical to those described for postconditions. The following is an example of use within a package spec: .. code-block:: ada package Math_Functions is ... function Sqrt (Arg : Float) return Float; pragma Precondition (Arg >= 0.0) ... end Math_Functions; ``Precondition`` pragmas may appear either immediately following the (separate) declaration of a subprogram, or at the start of the declarations of a subprogram body. Only other pragmas may intervene (that is appear between the subprogram declaration and its postconditions, or appear before the postcondition in the declaration sequence in a subprogram body). Note: precondition pragmas associated with subprograms that are marked as Inline_Always, or those marked as Inline with front-end inlining (-gnatN option set) are accepted and legality-checked by the compiler, but are ignored at run-time even if precondition checking is enabled. Note that pragma ``Precondition`` differs from the language-defined ``Pre`` aspect (and corresponding ``Pre`` pragma) in allowing multiple occurrences, allowing occurences in the body even if there is a separate spec, and allowing a second string parameter, and the use of the pragma identifier ``Check``. Historically, pragma ``Precondition`` was implemented prior to the development of Ada 2012, and has been retained in its original form for compatibility purposes. .. _Pragma-Predicate: Pragma Predicate ================ Syntax: :: pragma Predicate ([Entity =>] type_LOCAL_NAME, [Check =>] EXPRESSION); This pragma (available in all versions of Ada in GNAT) encompasses both the ``Static_Predicate`` and ``Dynamic_Predicate`` aspects in Ada 2012. A predicate is regarded as static if it has an allowed form for ``Static_Predicate`` and is otherwise treated as a ``Dynamic_Predicate``. Otherwise, predicates specified by this pragma behave exactly as described in the Ada 2012 reference manual. For example, if we have .. code-block:: ada type R is range 1 .. 10; subtype S is R; pragma Predicate (Entity => S, Check => S not in 4 .. 6); subtype Q is R pragma Predicate (Entity => Q, Check => F(Q) or G(Q)); the effect is identical to the following Ada 2012 code: .. code-block:: ada type R is range 1 .. 10; subtype S is R with Static_Predicate => S not in 4 .. 6; subtype Q is R with Dynamic_Predicate => F(Q) or G(Q); Note that there are no pragmas ``Dynamic_Predicate`` or ``Static_Predicate``. That is because these pragmas would affect legality and semantics of the program and thus do not have a neutral effect if ignored. The motivation behind providing pragmas equivalent to corresponding aspects is to allow a program to be written using the pragmas, and then compiled with a compiler that will ignore the pragmas. That doesn't work in the case of static and dynamic predicates, since if the corresponding pragmas are ignored, then the behavior of the program is fundamentally changed (for example a membership test ``A in B`` would not take into account a predicate defined for subtype B). When following this approach, the use of predicates should be avoided. Pragma Predicate_Failure ======================== Syntax: :: pragma Predicate_Failure ([Entity =>] type_LOCAL_NAME, [Message =>] String_Expression); The ``Predicate_Failure`` pragma is intended to be an exact replacement for the language-defined ``Predicate_Failure`` aspect, and shares its restrictions and semantics. Pragma Preelaborable_Initialization =================================== Syntax: .. code-block:: ada pragma Preelaborable_Initialization (DIRECT_NAME); This pragma is standard in Ada 2005, but is available in all earlier versions of Ada as an implementation-defined pragma. See Ada 2012 Reference Manual for details. Pragma Prefix_Exception_Messages ================================ .. index:: Prefix_Exception_Messages .. index:: exception .. index:: Exception_Message Syntax: .. code-block:: ada pragma Prefix_Exception_Messages; This is an implementation-defined configuration pragma that affects the behavior of raise statements with a message given as a static string constant (typically a string literal). In such cases, the string will be automatically prefixed by the name of the enclosing entity (giving the package and subprogram containing the raise statement). This helps to identify where messages are coming from, and this mode is automatic for the run-time library. The pragma has no effect if the message is computed with an expression other than a static string constant, since the assumption in this case is that the program computes exactly the string it wants. If you still want the prefixing in this case, you can always call ``GNAT.Source_Info.Enclosing_Entity`` and prepend the string manually. Pragma Pre_Class ================ .. index:: Pre_Class .. index:: Checks, preconditions Syntax: .. code-block:: ada pragma Pre_Class (Boolean_Expression); The ``Pre_Class`` pragma is intended to be an exact replacement for the language-defined ``Pre'Class`` aspect, and shares its restrictions and semantics. It must appear either immediately following the corresponding subprogram declaration (only other pragmas may intervene), or if there is no separate subprogram declaration, then it can appear at the start of the declarations in a subprogram body (preceded only by other pragmas). Note: This pragma is called ``Pre_Class`` rather than ``Pre'Class`` because the latter would not be strictly conforming to the allowed syntax for pragmas. The motivation for providing pragmas equivalent to the aspects is to allow a program to be written using the pragmas, and then compiled if necessary using an Ada compiler that does not recognize the pragmas or aspects, but is prepared to ignore the pragmas. The assertion policy that controls this pragma is ``Pre'Class``, not ``Pre_Class``. Pragma Priority_Specific_Dispatching ==================================== Syntax: :: pragma Priority_Specific_Dispatching ( POLICY_IDENTIFIER, first_priority_EXPRESSION, last_priority_EXPRESSION) POLICY_IDENTIFIER ::= EDF_Across_Priorities | FIFO_Within_Priorities | Non_Preemptive_Within_Priorities | Round_Robin_Within_Priorities This pragma is standard in Ada 2005, but is available in all earlier versions of Ada as an implementation-defined pragma. See Ada 2012 Reference Manual for details. Pragma Profile ============== Syntax: .. code-block:: ada pragma Profile (Ravenscar | Restricted | Rational | Jorvik | GNAT_Extended_Ravenscar | GNAT_Ravenscar_EDF ); This pragma is standard in Ada 2005, but is available in all earlier versions of Ada as an implementation-defined pragma. This is a configuration pragma that establishes a set of configuration pragmas that depend on the argument. ``Ravenscar`` is standard in Ada 2005. ``Jorvik`` is standard in Ada 202x. The other possibilities (``Restricted``, ``Rational``, ``GNAT_Extended_Ravenscar``, ``GNAT_Ravenscar_EDF``) are implementation-defined. ``GNAT_Extended_Ravenscar`` is an alias for ``Jorvik``. The set of configuration pragmas is defined in the following sections. * Pragma Profile (Ravenscar) The ``Ravenscar`` profile is standard in Ada 2005, but is available in all earlier versions of Ada as an implementation-defined pragma. This profile establishes the following set of configuration pragmas: * ``Task_Dispatching_Policy (FIFO_Within_Priorities)`` [RM D.2.2] Tasks are dispatched following a preemptive priority-ordered scheduling policy. * ``Locking_Policy (Ceiling_Locking)`` [RM D.3] While tasks and interrupts execute a protected action, they inherit the ceiling priority of the corresponding protected object. * ``Detect_Blocking`` This pragma forces the detection of potentially blocking operations within a protected operation, and to raise Program_Error if that happens. plus the following set of restrictions: * ``Max_Entry_Queue_Length => 1`` No task can be queued on a protected entry. * ``Max_Protected_Entries => 1`` * ``Max_Task_Entries => 0`` No rendezvous statements are allowed. * ``No_Abort_Statements`` * ``No_Dynamic_Attachment`` * ``No_Dynamic_Priorities`` * ``No_Implicit_Heap_Allocations`` * ``No_Local_Protected_Objects`` * ``No_Local_Timing_Events`` * ``No_Protected_Type_Allocators`` * ``No_Relative_Delay`` * ``No_Requeue_Statements`` * ``No_Select_Statements`` * ``No_Specific_Termination_Handlers`` * ``No_Task_Allocators`` * ``No_Task_Hierarchy`` * ``No_Task_Termination`` * ``Simple_Barriers`` The Ravenscar profile also includes the following restrictions that specify that there are no semantic dependencies on the corresponding predefined packages: * ``No_Dependence => Ada.Asynchronous_Task_Control`` * ``No_Dependence => Ada.Calendar`` * ``No_Dependence => Ada.Execution_Time.Group_Budget`` * ``No_Dependence => Ada.Execution_Time.Timers`` * ``No_Dependence => Ada.Task_Attributes`` * ``No_Dependence => System.Multiprocessors.Dispatching_Domains`` This set of configuration pragmas and restrictions correspond to the definition of the 'Ravenscar Profile' for limited tasking, devised and published by the :title:`International Real-Time Ada Workshop, 1997`. A description is also available at `http://www-users.cs.york.ac.uk/~burns/ravenscar.ps `_. The original definition of the profile was revised at subsequent IRTAW meetings. It has been included in the ISO :title:`Guide for the Use of the Ada Programming Language in High Integrity Systems`, and was made part of the Ada 2005 standard. The formal definition given by the Ada Rapporteur Group (ARG) can be found in two Ada Issues (AI-249 and AI-305) available at `http://www.ada-auth.org/cgi-bin/cvsweb.cgi/ais/ai-00249.txt `_ and `http://www.ada-auth.org/cgi-bin/cvsweb.cgi/ais/ai-00305.txt `_. The above set is a superset of the restrictions provided by pragma ``Profile (Restricted)``, it includes six additional restrictions (``Simple_Barriers``, ``No_Select_Statements``, ``No_Calendar``, ``No_Implicit_Heap_Allocations``, ``No_Relative_Delay`` and ``No_Task_Termination``). This means that pragma ``Profile (Ravenscar)``, like the pragma ``Profile (Restricted)``, automatically causes the use of a simplified, more efficient version of the tasking run-time library. * Pragma Profile (Jorvik) ``Jorvik`` is the new profile added to the Ada 202x draft standard, previously implemented under the name ``GNAT_Extended_Ravenscar``. The ``No_Implicit_Heap_Allocations`` restriction has been replaced by ``No_Implicit_Task_Allocations`` and ``No_Implicit_Protected_Object_Allocations``. The ``Simple_Barriers`` restriction has been replaced by ``Pure_Barriers``. The ``Max_Protected_Entries``, ``Max_Entry_Queue_Length``, and ``No_Relative_Delay`` restrictions have been removed. Details on the rationale for ``Jorvik`` and implications for use may be found in :title:`A New Ravenscar-Based Profile` by P. Rogers, J. Ruiz, T. Gingold and P. Bernardi, in :title:`Reliable Software Technologies -- Ada Europe 2017`, Springer-Verlag Lecture Notes in Computer Science, Number 10300. * Pragma Profile (GNAT_Ravenscar_EDF) This profile corresponds to the Ravenscar profile but using EDF_Across_Priority as the Task_Scheduling_Policy. * Pragma Profile (Restricted) This profile corresponds to the GNAT restricted run time. It establishes the following set of restrictions: * ``No_Abort_Statements`` * ``No_Entry_Queue`` * ``No_Task_Hierarchy`` * ``No_Task_Allocators`` * ``No_Dynamic_Priorities`` * ``No_Terminate_Alternatives`` * ``No_Dynamic_Attachment`` * ``No_Protected_Type_Allocators`` * ``No_Local_Protected_Objects`` * ``No_Requeue_Statements`` * ``No_Task_Attributes_Package`` * ``Max_Asynchronous_Select_Nesting = 0`` * ``Max_Task_Entries = 0`` * ``Max_Protected_Entries = 1`` * ``Max_Select_Alternatives = 0`` This set of restrictions causes the automatic selection of a simplified version of the run time that provides improved performance for the limited set of tasking functionality permitted by this set of restrictions. * Pragma Profile (Rational) The Rational profile is intended to facilitate porting legacy code that compiles with the Rational APEX compiler, even when the code includes non- conforming Ada constructs. The profile enables the following three pragmas: * ``pragma Implicit_Packing`` * ``pragma Overriding_Renamings`` * ``pragma Use_VADS_Size`` Pragma Profile_Warnings ======================= Syntax: .. code-block:: ada pragma Profile_Warnings (Ravenscar | Restricted | Rational); This is an implementation-defined pragma that is similar in effect to ``pragma Profile`` except that instead of generating ``Restrictions`` pragmas, it generates ``Restriction_Warnings`` pragmas. The result is that violations of the profile generate warning messages instead of error messages. Pragma Propagate_Exceptions =========================== .. index:: Interfacing to C++ Syntax: .. code-block:: ada pragma Propagate_Exceptions; This pragma is now obsolete and, other than generating a warning if warnings on obsolescent features are enabled, is ignored. It is retained for compatibility purposes. It used to be used in connection with optimization of a now-obsolete mechanism for implementation of exceptions. Pragma Provide_Shift_Operators ============================== .. index:: Shift operators Syntax: .. code-block:: ada pragma Provide_Shift_Operators (integer_first_subtype_LOCAL_NAME); This pragma can be applied to a first subtype local name that specifies either an unsigned or signed type. It has the effect of providing the five shift operators (Shift_Left, Shift_Right, Shift_Right_Arithmetic, Rotate_Left and Rotate_Right) for the given type. It is similar to including the function declarations for these five operators, together with the pragma Import (Intrinsic, ...) statements. Pragma Psect_Object =================== Syntax: :: pragma Psect_Object ( [Internal =>] LOCAL_NAME, [, [External =>] EXTERNAL_SYMBOL] [, [Size =>] EXTERNAL_SYMBOL]); EXTERNAL_SYMBOL ::= IDENTIFIER | static_string_EXPRESSION This pragma is identical in effect to pragma ``Common_Object``. .. _Pragma-Pure_Function: Pragma Pure_Function ==================== Syntax: :: pragma Pure_Function ([Entity =>] function_LOCAL_NAME); This pragma appears in the same declarative part as a function declaration (or a set of function declarations if more than one overloaded declaration exists, in which case the pragma applies to all entities). It specifies that the function ``Entity`` is to be considered pure for the purposes of code generation. This means that the compiler can assume that there are no side effects, and in particular that two identical calls produce the same result in the same context. It also means that the function can be used in an address clause. Note that, quite deliberately, there are no static checks to try to ensure that this promise is met, so ``Pure_Function`` can be used with functions that are conceptually pure, even if they do modify global variables. For example, a square root function that is instrumented to count the number of times it is called is still conceptually pure, and can still be optimized, even though it modifies a global variable (the count). Memo functions are another example (where a table of previous calls is kept and consulted to avoid re-computation). Note also that the normal rules excluding optimization of subprograms in pure units (when parameter types are descended from System.Address, or when the full view of a parameter type is limited), do not apply for the Pure_Function case. If you explicitly specify Pure_Function, the compiler may optimize away calls with identical arguments, and if that results in unexpected behavior, the proper action is not to use the pragma for subprograms that are not (conceptually) pure. Note: Most functions in a ``Pure`` package are automatically pure, and there is no need to use pragma ``Pure_Function`` for such functions. One exception is any function that has at least one formal of type ``System.Address`` or a type derived from it. Such functions are not considered pure by default, since the compiler assumes that the ``Address`` parameter may be functioning as a pointer and that the referenced data may change even if the address value does not. Similarly, imported functions are not considered to be pure by default, since there is no way of checking that they are in fact pure. The use of pragma ``Pure_Function`` for such a function will override these default assumption, and cause the compiler to treat a designated subprogram as pure in these cases. Note: If pragma ``Pure_Function`` is applied to a renamed function, it applies to the underlying renamed function. This can be used to disambiguate cases of overloading where some but not all functions in a set of overloaded functions are to be designated as pure. If pragma ``Pure_Function`` is applied to a library-level function, the function is also considered pure from an optimization point of view, but the unit is not a Pure unit in the categorization sense. So for example, a function thus marked is free to ``with`` non-pure units. Pragma Rational =============== Syntax: .. code-block:: ada pragma Rational; This pragma is considered obsolescent, but is retained for compatibility purposes. It is equivalent to: .. code-block:: ada pragma Profile (Rational); Pragma Ravenscar ================ Syntax: .. code-block:: ada pragma Ravenscar; This pragma is considered obsolescent, but is retained for compatibility purposes. It is equivalent to: .. code-block:: ada pragma Profile (Ravenscar); which is the preferred method of setting the ``Ravenscar`` profile. .. _Pragma-Refined_Depends: Pragma Refined_Depends ====================== Syntax: .. code-block:: ada pragma Refined_Depends (DEPENDENCY_RELATION); DEPENDENCY_RELATION ::= null | (DEPENDENCY_CLAUSE {, DEPENDENCY_CLAUSE}) DEPENDENCY_CLAUSE ::= OUTPUT_LIST =>[+] INPUT_LIST | NULL_DEPENDENCY_CLAUSE NULL_DEPENDENCY_CLAUSE ::= null => INPUT_LIST OUTPUT_LIST ::= OUTPUT | (OUTPUT {, OUTPUT}) INPUT_LIST ::= null | INPUT | (INPUT {, INPUT}) OUTPUT ::= NAME | FUNCTION_RESULT INPUT ::= NAME where FUNCTION_RESULT is a function Result attribute_reference For the semantics of this pragma, see the entry for aspect ``Refined_Depends`` in the SPARK 2014 Reference Manual, section 6.1.5. .. _Pragma-Refined_Global: Pragma Refined_Global ===================== Syntax: .. code-block:: ada pragma Refined_Global (GLOBAL_SPECIFICATION); GLOBAL_SPECIFICATION ::= null | (GLOBAL_LIST) | (MODED_GLOBAL_LIST {, MODED_GLOBAL_LIST}) MODED_GLOBAL_LIST ::= MODE_SELECTOR => GLOBAL_LIST MODE_SELECTOR ::= In_Out | Input | Output | Proof_In GLOBAL_LIST ::= GLOBAL_ITEM | (GLOBAL_ITEM {, GLOBAL_ITEM}) GLOBAL_ITEM ::= NAME For the semantics of this pragma, see the entry for aspect ``Refined_Global`` in the SPARK 2014 Reference Manual, section 6.1.4. .. _Pragma-Refined_Post: Pragma Refined_Post =================== Syntax: .. code-block:: ada pragma Refined_Post (boolean_EXPRESSION); For the semantics of this pragma, see the entry for aspect ``Refined_Post`` in the SPARK 2014 Reference Manual, section 7.2.7. .. _Pragma-Refined_State: Pragma Refined_State ==================== Syntax: .. code-block:: ada pragma Refined_State (REFINEMENT_LIST); REFINEMENT_LIST ::= (REFINEMENT_CLAUSE {, REFINEMENT_CLAUSE}) REFINEMENT_CLAUSE ::= state_NAME => CONSTITUENT_LIST CONSTITUENT_LIST ::= null | CONSTITUENT | (CONSTITUENT {, CONSTITUENT}) CONSTITUENT ::= object_NAME | state_NAME For the semantics of this pragma, see the entry for aspect ``Refined_State`` in the SPARK 2014 Reference Manual, section 7.2.2. Pragma Relative_Deadline ======================== Syntax: .. code-block:: ada pragma Relative_Deadline (time_span_EXPRESSION); This pragma is standard in Ada 2005, but is available in all earlier versions of Ada as an implementation-defined pragma. See Ada 2012 Reference Manual for details. .. _Pragma-Remote_Access_Type: Pragma Remote_Access_Type ========================= Syntax: :: pragma Remote_Access_Type ([Entity =>] formal_access_type_LOCAL_NAME); This pragma appears in the formal part of a generic declaration. It specifies an exception to the RM rule from E.2.2(17/2), which forbids the use of a remote access to class-wide type as actual for a formal access type. When this pragma applies to a formal access type ``Entity``, that type is treated as a remote access to class-wide type in the generic. It must be a formal general access type, and its designated type must be the class-wide type of a formal tagged limited private type from the same generic declaration. In the generic unit, the formal type is subject to all restrictions pertaining to remote access to class-wide types. At instantiation, the actual type must be a remote access to class-wide type. Pragma Rename_Pragma ============================ .. index:: Pragmas, synonyms Syntax: :: pragma Rename_Pragma ( [New_Name =>] IDENTIFIER, [Renamed =>] pragma_IDENTIFIER); This pragma provides a mechanism for supplying new names for existing pragmas. The ``New_Name`` identifier can subsequently be used as a synonym for the Renamed pragma. For example, suppose you have code that was originally developed on a compiler that supports Inline_Only as an implementation defined pragma. And suppose the semantics of pragma Inline_Only are identical to (or at least very similar to) the GNAT implementation defined pragma Inline_Always. You could globally replace Inline_Only with Inline_Always. However, to avoid that source modification, you could instead add a configuration pragma: .. code-block:: ada pragma Rename_Pragma ( New_Name => Inline_Only, Renamed => Inline_Always); Then GNAT will treat "pragma Inline_Only ..." as if you had written "pragma Inline_Always ...". Pragma Inline_Only will not necessarily mean the same thing as the other Ada compiler; it's up to you to make sure the semantics are close enough. Pragma Restricted_Run_Time ========================== Syntax: .. code-block:: ada pragma Restricted_Run_Time; This pragma is considered obsolescent, but is retained for compatibility purposes. It is equivalent to: .. code-block:: ada pragma Profile (Restricted); which is the preferred method of setting the restricted run time profile. Pragma Restriction_Warnings =========================== Syntax: :: pragma Restriction_Warnings (restriction_IDENTIFIER {, restriction_IDENTIFIER}); This pragma allows a series of restriction identifiers to be specified (the list of allowed identifiers is the same as for pragma ``Restrictions``). For each of these identifiers the compiler checks for violations of the restriction, but generates a warning message rather than an error message if the restriction is violated. One use of this is in situations where you want to know about violations of a restriction, but you want to ignore some of these violations. Consider this example, where you want to set Ada_95 mode and enable style checks, but you want to know about any other use of implementation pragmas: .. code-block:: ada pragma Restriction_Warnings (No_Implementation_Pragmas); pragma Warnings (Off, "violation of No_Implementation_Pragmas"); pragma Ada_95; pragma Style_Checks ("2bfhkM160"); pragma Warnings (On, "violation of No_Implementation_Pragmas"); By including the above lines in a configuration pragmas file, the Ada_95 and Style_Checks pragmas are accepted without generating a warning, but any other use of implementation defined pragmas will cause a warning to be generated. Pragma Reviewable ================= Syntax: .. code-block:: ada pragma Reviewable; This pragma is an RM-defined standard pragma, but has no effect on the program being compiled, or on the code generated for the program. To obtain the required output specified in RM H.3.1, the compiler must be run with various special switches as follows: * *Where compiler-generated run-time checks remain* The switch *-gnatGL* may be used to list the expanded code in pseudo-Ada form. Runtime checks show up in the listing either as explicit checks or operators marked with {} to indicate a check is present. * *An identification of known exceptions at compile time* If the program is compiled with *-gnatwa*, the compiler warning messages will indicate all cases where the compiler detects that an exception is certain to occur at run time. * *Possible reads of uninitialized variables* The compiler warns of many such cases, but its output is incomplete. .. only:: PRO or GPL The CodePeer analysis tool may be used to obtain a comprehensive list of all possible points at which uninitialized data may be read. .. only:: FSF A supplemental static analysis tool may be used to obtain a comprehensive list of all possible points at which uninitialized data may be read. * *Where run-time support routines are implicitly invoked* In the output from *-gnatGL*, run-time calls are explicitly listed as calls to the relevant run-time routine. * *Object code listing* This may be obtained either by using the *-S* switch, or the objdump utility. * *Constructs known to be erroneous at compile time* These are identified by warnings issued by the compiler (use *-gnatwa*). * *Stack usage information* Static stack usage data (maximum per-subprogram) can be obtained via the *-fstack-usage* switch to the compiler. Dynamic stack usage data (per task) can be obtained via the *-u* switch to gnatbind .. only:: PRO or GPL The gnatstack utility can be used to provide additional information on stack usage. * *Object code listing of entire partition* This can be obtained by compiling the partition with *-S*, or by applying objdump to all the object files that are part of the partition. * *A description of the run-time model* The full sources of the run-time are available, and the documentation of these routines describes how these run-time routines interface to the underlying operating system facilities. * *Control and data-flow information* .. only:: PRO or GPL The CodePeer tool may be used to obtain complete control and data-flow information, as well as comprehensive messages identifying possible problems based on this information. .. only:: FSF A supplemental static analysis tool may be used to obtain complete control and data-flow information, as well as comprehensive messages identifying possible problems based on this information. .. _Pragma-Secondary_Stack_Size: Pragma Secondary_Stack_Size =========================== Syntax: .. code-block:: ada pragma Secondary_Stack_Size (integer_EXPRESSION); This pragma appears within the task definition of a single task declaration or a task type declaration (like pragma ``Storage_Size``) and applies to all task objects of that type. The argument specifies the size of the secondary stack to be used by these task objects, and must be of an integer type. The secondary stack is used to handle functions that return a variable-sized result, for example a function returning an unconstrained String. Note this pragma only applies to targets using fixed secondary stacks, like VxWorks 653 and bare board targets, where a fixed block for the secondary stack is allocated from the primary stack of the task. By default, these targets assign a percentage of the primary stack for the secondary stack, as defined by ``System.Parameter.Sec_Stack_Percentage``. With this pragma, an ``integer_EXPRESSION`` of bytes is assigned from the primary stack instead. For most targets, the pragma does not apply as the secondary stack grows on demand: allocated as a chain of blocks in the heap. The default size of these blocks can be modified via the :switch:`-D` binder option as described in :title:`GNAT User's Guide`. Note that no check is made to see if the secondary stack can fit inside the primary stack. Note the pragma cannot appear when the restriction ``No_Secondary_Stack`` is in effect. Pragma Share_Generic ==================== Syntax: :: pragma Share_Generic (GNAME {, GNAME}); GNAME ::= generic_unit_NAME | generic_instance_NAME This pragma is provided for compatibility with Dec Ada 83. It has no effect in GNAT (which does not implement shared generics), other than to check that the given names are all names of generic units or generic instances. .. _Pragma-Shared: Pragma Shared ============= This pragma is provided for compatibility with Ada 83. The syntax and semantics are identical to pragma Atomic. Pragma Short_Circuit_And_Or =========================== Syntax: .. code-block:: ada pragma Short_Circuit_And_Or; This configuration pragma causes any occurrence of the AND operator applied to operands of type Standard.Boolean to be short-circuited (i.e. the AND operator is treated as if it were AND THEN). Or is similarly treated as OR ELSE. This may be useful in the context of certification protocols requiring the use of short-circuited logical operators. If this configuration pragma occurs locally within the file being compiled, it applies only to the file being compiled. There is no requirement that all units in a partition use this option. Pragma Short_Descriptors ======================== Syntax: .. code-block:: ada pragma Short_Descriptors; This pragma is provided for compatibility with other Ada implementations. It is recognized but ignored by all current versions of GNAT. .. _Pragma-Side_Effects: Pragma Side_Effects =================== Syntax: .. code-block:: ada pragma Side_Effects [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Side_Effects`` in the SPARK Reference Manual, section 6.1.11. .. _Pragma-Simple_Storage_Pool_Type: Pragma Simple_Storage_Pool_Type =============================== .. index:: Storage pool, simple .. index:: Simple storage pool Syntax: .. code-block:: ada pragma Simple_Storage_Pool_Type (type_LOCAL_NAME); A type can be established as a 'simple storage pool type' by applying the representation pragma ``Simple_Storage_Pool_Type`` to the type. A type named in the pragma must be a library-level immutably limited record type or limited tagged type declared immediately within a package declaration. The type can also be a limited private type whose full type is allowed as a simple storage pool type. For a simple storage pool type ``SSP``, nonabstract primitive subprograms ``Allocate``, ``Deallocate``, and ``Storage_Size`` can be declared that are subtype conformant with the following subprogram declarations: .. code-block:: ada procedure Allocate (Pool : in out SSP; Storage_Address : out System.Address; Size_In_Storage_Elements : System.Storage_Elements.Storage_Count; Alignment : System.Storage_Elements.Storage_Count); procedure Deallocate (Pool : in out SSP; Storage_Address : System.Address; Size_In_Storage_Elements : System.Storage_Elements.Storage_Count; Alignment : System.Storage_Elements.Storage_Count); function Storage_Size (Pool : SSP) return System.Storage_Elements.Storage_Count; Procedure ``Allocate`` must be declared, whereas ``Deallocate`` and ``Storage_Size`` are optional. If ``Deallocate`` is not declared, then applying an unchecked deallocation has no effect other than to set its actual parameter to null. If ``Storage_Size`` is not declared, then the ``Storage_Size`` attribute applied to an access type associated with a pool object of type SSP returns zero. Additional operations can be declared for a simple storage pool type (such as for supporting a mark/release storage-management discipline). An object of a simple storage pool type can be associated with an access type by specifying the attribute :ref:`Simple_Storage_Pool `. For example: .. code-block:: ada My_Pool : My_Simple_Storage_Pool_Type; type Acc is access My_Data_Type; for Acc'Simple_Storage_Pool use My_Pool; See attribute :ref:`Simple_Storage_Pool ` for further details. .. _Pragma_Source_File_Name: Pragma Source_File_Name ======================= Syntax: :: pragma Source_File_Name ( [Unit_Name =>] unit_NAME, Spec_File_Name => STRING_LITERAL, [Index => INTEGER_LITERAL]); pragma Source_File_Name ( [Unit_Name =>] unit_NAME, Body_File_Name => STRING_LITERAL, [Index => INTEGER_LITERAL]); Use this to override the normal naming convention. It is a configuration pragma, and so has the usual applicability of configuration pragmas (i.e., it applies to either an entire partition, or to all units in a compilation, or to a single unit, depending on how it is used). ``unit_name`` is mapped to ``file_name_literal``. The identifier for the second argument is required, and indicates whether this is the file name for the spec or for the body. The optional Index argument should be used when a file contains multiple units, and when you do not want to use ``gnatchop`` to separate then into multiple files (which is the recommended procedure to limit the number of recompilations that are needed when some sources change). For instance, if the source file :file:`source.ada` contains .. code-block:: ada package B is ... end B; with B; procedure A is begin .. end A; you could use the following configuration pragmas: .. code-block:: ada pragma Source_File_Name (B, Spec_File_Name => "source.ada", Index => 1); pragma Source_File_Name (A, Body_File_Name => "source.ada", Index => 2); Note that the ``gnatname`` utility can also be used to generate those configuration pragmas. Another form of the ``Source_File_Name`` pragma allows the specification of patterns defining alternative file naming schemes to apply to all files. :: pragma Source_File_Name ( [Spec_File_Name =>] STRING_LITERAL [,[Casing =>] CASING_SPEC] [,[Dot_Replacement =>] STRING_LITERAL]); pragma Source_File_Name ( [Body_File_Name =>] STRING_LITERAL [,[Casing =>] CASING_SPEC] [,[Dot_Replacement =>] STRING_LITERAL]); pragma Source_File_Name ( [Subunit_File_Name =>] STRING_LITERAL [,[Casing =>] CASING_SPEC] [,[Dot_Replacement =>] STRING_LITERAL]); CASING_SPEC ::= Lowercase | Uppercase | Mixedcase The first argument is a pattern that contains a single asterisk indicating the point at which the unit name is to be inserted in the pattern string to form the file name. The second argument is optional. If present it specifies the casing of the unit name in the resulting file name string. The default is lower case. Finally the third argument allows for systematic replacement of any dots in the unit name by the specified string literal. Note that Source_File_Name pragmas should not be used if you are using project files. The reason for this rule is that the project manager is not aware of these pragmas, and so other tools that use the project file would not be aware of the intended naming conventions. If you are using project files, file naming is controlled by Source_File_Name_Project pragmas, which are usually supplied automatically by the project manager. A pragma Source_File_Name cannot appear after a :ref:`Pragma_Source_File_Name_Project`. For more details on the use of the ``Source_File_Name`` pragma, see the sections on `Using Other File Names` and `Alternative File Naming Schemes` in the :title:`GNAT User's Guide`. .. _Pragma_Source_File_Name_Project: Pragma Source_File_Name_Project =============================== This pragma has the same syntax and semantics as pragma Source_File_Name. It is only allowed as a stand-alone configuration pragma. It cannot appear after a :ref:`Pragma_Source_File_Name`, and most importantly, once pragma Source_File_Name_Project appears, no further Source_File_Name pragmas are allowed. The intention is that Source_File_Name_Project pragmas are always generated by the Project Manager in a manner consistent with the naming specified in a project file, and when naming is controlled in this manner, it is not permissible to attempt to modify this naming scheme using Source_File_Name or Source_File_Name_Project pragmas (which would not be known to the project manager). Pragma Source_Reference ======================= Syntax: .. code-block:: ada pragma Source_Reference (INTEGER_LITERAL, STRING_LITERAL); This pragma must appear as the first line of a source file. ``integer_literal`` is the logical line number of the line following the pragma line (for use in error messages and debugging information). ``string_literal`` is a static string constant that specifies the file name to be used in error messages and debugging information. This is most notably used for the output of ``gnatchop`` with the *-r* switch, to make sure that the original unchopped source file is the one referred to. The second argument must be a string literal, it cannot be a static string expression other than a string literal. This is because its value is needed for error messages issued by all phases of the compiler. .. _Pragma-SPARK_Mode: Pragma SPARK_Mode ================= Syntax: :: pragma SPARK_Mode [(On | Off)] ; In general a program can have some parts that are in SPARK 2014 (and follow all the rules in the SPARK Reference Manual), and some parts that are full Ada 2012. The SPARK_Mode pragma is used to identify which parts are in SPARK 2014 (by default programs are in full Ada). The SPARK_Mode pragma can be used in the following places: * As a configuration pragma, in which case it sets the default mode for all units compiled with this pragma. * Immediately following a library-level subprogram spec * Immediately within a library-level package body * Immediately following the ``private`` keyword of a library-level package spec * Immediately following the ``begin`` keyword of a library-level package body * Immediately within a library-level subprogram body Normally a subprogram or package spec/body inherits the current mode that is active at the point it is declared. But this can be overridden by pragma within the spec or body as above. The basic consistency rule is that you can't turn SPARK_Mode back ``On``, once you have explicitly (with a pragma) turned if ``Off``. So the following rules apply: If a subprogram spec has SPARK_Mode ``Off``, then the body must also have SPARK_Mode ``Off``. For a package, we have four parts: * the package public declarations * the package private part * the body of the package * the elaboration code after ``begin`` For a package, the rule is that if you explicitly turn SPARK_Mode ``Off`` for any part, then all the following parts must have SPARK_Mode ``Off``. Note that this may require repeating a pragma SPARK_Mode (``Off``) in the body. For example, if we have a configuration pragma SPARK_Mode (``On``) that turns the mode on by default everywhere, and one particular package spec has pragma SPARK_Mode (``Off``), then that pragma will need to be repeated in the package body. Pragma Static_Elaboration_Desired ================================= Syntax: .. code-block:: ada pragma Static_Elaboration_Desired; This pragma is used to indicate that the compiler should attempt to initialize statically the objects declared in the library unit to which the pragma applies, when these objects are initialized (explicitly or implicitly) by an aggregate. In the absence of this pragma, aggregates in object declarations are expanded into assignments and loops, even when the aggregate components are static constants. When the aggregate is present the compiler builds a static expression that requires no run-time code, so that the initialized object can be placed in read-only data space. If the components are not static, or the aggregate has more that 100 components, the compiler emits a warning that the pragma cannot be obeyed. (See also the restriction No_Implicit_Loops, which supports static construction of larger aggregates with static components that include an others choice.) Pragma Stream_Convert ===================== Syntax: :: pragma Stream_Convert ( [Entity =>] type_LOCAL_NAME, [Read =>] function_NAME, [Write =>] function_NAME); This pragma provides an efficient way of providing user-defined stream attributes. Not only is it simpler to use than specifying the attributes directly, but more importantly, it allows the specification to be made in such a way that the predefined unit Ada.Streams is not loaded unless it is actually needed (i.e. unless the stream attributes are actually used); the use of the Stream_Convert pragma adds no overhead at all, unless the stream attributes are actually used on the designated type. The first argument specifies the type for which stream functions are provided. The second parameter provides a function used to read values of this type. It must name a function whose argument type may be any subtype, and whose returned type must be the type given as the first argument to the pragma. The meaning of the ``Read`` parameter is that if a stream attribute directly or indirectly specifies reading of the type given as the first parameter, then a value of the type given as the argument to the Read function is read from the stream, and then the Read function is used to convert this to the required target type. Similarly the ``Write`` parameter specifies how to treat write attributes that directly or indirectly apply to the type given as the first parameter. It must have an input parameter of the type specified by the first parameter, and the return type must be the same as the input type of the Read function. The effect is to first call the Write function to convert to the given stream type, and then write the result type to the stream. The Read and Write functions must not be overloaded subprograms. If necessary renamings can be supplied to meet this requirement. The usage of this attribute is best illustrated by a simple example, taken from the GNAT implementation of package Ada.Strings.Unbounded: .. code-block:: ada function To_Unbounded (S : String) return Unbounded_String renames To_Unbounded_String; pragma Stream_Convert (Unbounded_String, To_Unbounded, To_String); The specifications of the referenced functions, as given in the Ada Reference Manual are: .. code-block:: ada function To_Unbounded_String (Source : String) return Unbounded_String; function To_String (Source : Unbounded_String) return String; The effect is that if the value of an unbounded string is written to a stream, then the representation of the item in the stream is in the same format that would be used for ``Standard.String'Output``, and this same representation is expected when a value of this type is read from the stream. Note that the value written always includes the bounds, even for Unbounded_String'Write, since Unbounded_String is not an array type. Note that the ``Stream_Convert`` pragma is not effective in the case of a derived type of a non-limited tagged type. If such a type is specified then the pragma is silently ignored, and the default implementation of the stream attributes is used instead. Pragma Style_Checks =================== Syntax: :: pragma Style_Checks (string_LITERAL | ALL_CHECKS | On | Off [, LOCAL_NAME]); This pragma is used in conjunction with compiler switches to control the built in style checking provided by GNAT. The compiler switches, if set, provide an initial setting for the switches, and this pragma may be used to modify these settings, or the settings may be provided entirely by the use of the pragma. This pragma can be used anywhere that a pragma is legal, including use as a configuration pragma (including use in the :file:`gnat.adc` file). The form with a string literal specifies which style options are to be activated. These are additive, so they apply in addition to any previously set style check options. The codes for the options are the same as those used in the *-gnaty* switch to *gcc* or *gnatmake*. For example the following two methods can be used to enable layout checking: * :: pragma Style_Checks ("l"); * :: gcc -c -gnatyl ... The form ``ALL_CHECKS`` activates all standard checks (its use is equivalent to the use of the :switch:`gnaty` switch with no options. See the :title:`GNAT User's Guide` for details.) Note: the behavior is slightly different in GNAT mode (:switch:`-gnatg` used). In this case, ``ALL_CHECKS`` implies the standard set of GNAT mode style check options (i.e. equivalent to :switch:`-gnatyg`). The forms with ``Off`` and ``On`` can be used to temporarily disable style checks as shown in the following example: .. code-block:: ada pragma Style_Checks ("k"); -- requires keywords in lower case pragma Style_Checks (Off); -- turn off style checks NULL; -- this will not generate an error message pragma Style_Checks (On); -- turn style checks back on NULL; -- this will generate an error message Finally the two argument form is allowed only if the first argument is ``On`` or ``Off``. The effect is to turn of semantic style checks for the specified entity, as shown in the following example: .. code-block:: ada pragma Style_Checks ("r"); -- require consistency of identifier casing Arg : Integer; Rf1 : Integer := ARG; -- incorrect, wrong case pragma Style_Checks (Off, Arg); Rf2 : Integer := ARG; -- OK, no error Pragma Subtitle =============== Syntax: :: pragma Subtitle ([Subtitle =>] STRING_LITERAL); This pragma is recognized for compatibility with other Ada compilers but is ignored by GNAT. Pragma Suppress =============== Syntax: :: pragma Suppress (Identifier [, [On =>] Name]); This is a standard pragma, and supports all the check names required in the RM. It is included here because GNAT recognizes some additional check names that are implementation defined (as permitted by the RM): * ``Alignment_Check`` can be used to suppress alignment checks on addresses used in address clauses. Such checks can also be suppressed by suppressing range checks, but the specific use of ``Alignment_Check`` allows suppression of alignment checks without suppressing other range checks. Note that ``Alignment_Check`` is suppressed by default on machines (such as the x86) with non-strict alignment. * ``Atomic_Synchronization`` can be used to suppress the special memory synchronization instructions that are normally generated for access to ``Atomic`` variables to ensure correct synchronization between tasks that use such variables for synchronization purposes. * ``Duplicated_Tag_Check`` Can be used to suppress the check that is generated for a duplicated tag value when a tagged type is declared. * ``Container_Checks`` Can be used to suppress all checks within Ada.Containers and instances of its children, including Tampering_Check. * ``Tampering_Check`` Can be used to suppress tampering check in the containers. * ``Predicate_Check`` can be used to control whether predicate checks are active. It is applicable only to predicates for which the policy is ``Check``. Unlike ``Assertion_Policy``, which determines if a given predicate is ignored or checked for the whole program, the use of ``Suppress`` and ``Unsuppress`` with this check name allows a given predicate to be turned on and off at specific points in the program. * ``Validity_Check`` can be used specifically to control validity checks. If ``Suppress`` is used to suppress validity checks, then no validity checks are performed, including those specified by the appropriate compiler switch or the ``Validity_Checks`` pragma. * Additional check names previously introduced by use of the ``Check_Name`` pragma are also allowed. Note that pragma Suppress gives the compiler permission to omit checks, but does not require the compiler to omit checks. The compiler will generate checks if they are essentially free, even when they are suppressed. In particular, if the compiler can prove that a certain check will necessarily fail, it will generate code to do an unconditional 'raise', even if checks are suppressed. The compiler warns in this case. Of course, run-time checks are omitted whenever the compiler can prove that they will not fail, whether or not checks are suppressed. Pragma Suppress_All =================== Syntax: .. code-block:: ada pragma Suppress_All; This pragma can appear anywhere within a unit. The effect is to apply ``Suppress (All_Checks)`` to the unit in which it appears. This pragma is implemented for compatibility with DEC Ada 83 usage where it appears at the end of a unit, and for compatibility with Rational Ada, where it appears as a program unit pragma. The use of the standard Ada pragma ``Suppress (All_Checks)`` as a normal configuration pragma is the preferred usage in GNAT. .. _Pragma-Suppress_Debug_Info: Pragma Suppress_Debug_Info ========================== Syntax: :: pragma Suppress_Debug_Info ([Entity =>] LOCAL_NAME); This pragma can be used to suppress generation of debug information for the specified entity. It is intended primarily for use in debugging the debugger, and navigating around debugger problems. Pragma Suppress_Exception_Locations =================================== Syntax: .. code-block:: ada pragma Suppress_Exception_Locations; In normal mode, a raise statement for an exception by default generates an exception message giving the file name and line number for the location of the raise. This is useful for debugging and logging purposes, but this entails extra space for the strings for the messages. The configuration pragma ``Suppress_Exception_Locations`` can be used to suppress the generation of these strings, with the result that space is saved, but the exception message for such raises is null. This configuration pragma may appear in a global configuration pragma file, or in a specific unit as usual. It is not required that this pragma be used consistently within a partition, so it is fine to have some units within a partition compiled with this pragma and others compiled in normal mode without it. .. _Pragma-Suppress_Initialization: Pragma Suppress_Initialization ============================== .. index:: Suppressing initialization .. index:: Initialization, suppression of Syntax: :: pragma Suppress_Initialization ([Entity =>] variable_or_subtype_LOCAL_NAME); Here variable_or_subtype_LOCAL_NAME is the name introduced by a type declaration or subtype declaration or the name of a variable introduced by an object declaration. In the case of a type or subtype this pragma suppresses any implicit or explicit initialization for all variables of the given type or subtype, including initialization resulting from the use of pragmas Normalize_Scalars or Initialize_Scalars. This is considered a representation item, so it cannot be given after the type is frozen. It applies to all subsequent object declarations, and also any allocator that creates objects of the type. If the pragma is given for the first subtype, then it is considered to apply to the base type and all its subtypes. If the pragma is given for other than a first subtype, then it applies only to the given subtype. The pragma may not be given after the type is frozen. Note that this includes eliminating initialization of discriminants for discriminated types, and tags for tagged types. In these cases, you will have to use some non-portable mechanism (e.g. address overlays or unchecked conversion) to achieve required initialization of these fields before accessing any object of the corresponding type. For the variable case, implicit initialization for the named variable is suppressed, just as though its subtype had been given in a pragma Suppress_Initialization, as described above. Pragma Task_Name ================ Syntax .. code-block:: ada pragma Task_Name (string_EXPRESSION); This pragma appears within a task definition (like pragma ``Priority``) and applies to the task in which it appears. The argument must be of type String, and provides a name to be used for the task instance when the task is created. Note that this expression is not required to be static, and in particular, it can contain references to task discriminants. This facility can be used to provide different names for different tasks as they are created, as illustrated in the example below. The task name is recorded internally in the run-time structures and is accessible to tools like the debugger. In addition the routine ``Ada.Task_Identification.Image`` will return this string, with a unique task address appended. .. code-block:: ada -- Example of the use of pragma Task_Name with Ada.Task_Identification; use Ada.Task_Identification; with Text_IO; use Text_IO; procedure t3 is type Astring is access String; task type Task_Typ (Name : access String) is pragma Task_Name (Name.all); end Task_Typ; task body Task_Typ is Nam : constant String := Image (Current_Task); begin Put_Line ("-->" & Nam (1 .. 14) & "<--"); end Task_Typ; type Ptr_Task is access Task_Typ; Task_Var : Ptr_Task; begin Task_Var := new Task_Typ (new String'("This is task 1")); Task_Var := new Task_Typ (new String'("This is task 2")); end; Pragma Task_Storage =================== Syntax: :: pragma Task_Storage ( [Task_Type =>] LOCAL_NAME, [Top_Guard =>] static_integer_EXPRESSION); This pragma specifies the length of the guard area for tasks. The guard area is an additional storage area allocated to a task. A value of zero means that either no guard area is created or a minimal guard area is created, depending on the target. This pragma can appear anywhere a ``Storage_Size`` attribute definition clause is allowed for a task type. .. _Pragma-Test_Case: Pragma Test_Case ================ .. index:: Test cases Syntax: :: pragma Test_Case ( [Name =>] static_string_Expression ,[Mode =>] (Nominal | Robustness) [, Requires => Boolean_Expression] [, Ensures => Boolean_Expression]); The ``Test_Case`` pragma allows defining fine-grain specifications for use by testing tools. The compiler checks the validity of the ``Test_Case`` pragma, but its presence does not lead to any modification of the code generated by the compiler. ``Test_Case`` pragmas may only appear immediately following the (separate) declaration of a subprogram in a package declaration, inside a package spec unit. Only other pragmas may intervene (that is appear between the subprogram declaration and a test case). The compiler checks that boolean expressions given in ``Requires`` and ``Ensures`` are valid, where the rules for ``Requires`` are the same as the rule for an expression in ``Precondition`` and the rules for ``Ensures`` are the same as the rule for an expression in ``Postcondition``. In particular, attributes ``'Old`` and ``'Result`` can only be used within the ``Ensures`` expression. The following is an example of use within a package spec: .. code-block:: ada package Math_Functions is ... function Sqrt (Arg : Float) return Float; pragma Test_Case (Name => "Test 1", Mode => Nominal, Requires => Arg < 10000.0, Ensures => Sqrt'Result < 10.0); ... end Math_Functions; The meaning of a test case is that there is at least one context where ``Requires`` holds such that, if the associated subprogram is executed in that context, then ``Ensures`` holds when the subprogram returns. Mode ``Nominal`` indicates that the input context should also satisfy the precondition of the subprogram, and the output context should also satisfy its postcondition. Mode ``Robustness`` indicates that the precondition and postcondition of the subprogram should be ignored for this test case. .. _Pragma-Thread_Local_Storage: Pragma Thread_Local_Storage =========================== .. index:: Task specific storage .. index:: TLS (Thread Local Storage) .. index:: Task_Attributes Syntax: :: pragma Thread_Local_Storage ([Entity =>] LOCAL_NAME); This pragma specifies that the specified entity, which must be a variable declared in a library-level package, is to be marked as "Thread Local Storage" (``TLS``). On systems supporting this (which include Windows, Solaris, GNU/Linux, and VxWorks), this causes each thread (and hence each Ada task) to see a distinct copy of the variable. The variable must not have default initialization, and if there is an explicit initialization, it must be either ``null`` for an access variable, a static expression for a scalar variable, or a fully static aggregate for a composite type, that is to say, an aggregate all of whose components are static, and which does not include packed or discriminated components. This provides a low-level mechanism similar to that provided by the ``Ada.Task_Attributes`` package, but much more efficient and is also useful in writing interface code that will interact with foreign threads. If this pragma is used on a system where ``TLS`` is not supported, then an error message will be generated and the program will be rejected. Pragma Time_Slice ================= Syntax: .. code-block:: ada pragma Time_Slice (static_duration_EXPRESSION); For implementations of GNAT on operating systems where it is possible to supply a time slice value, this pragma may be used for this purpose. It is ignored if it is used in a system that does not allow this control, or if it appears in other than the main program unit. Pragma Title ============ Syntax: :: pragma Title (TITLING_OPTION [, TITLING OPTION]); TITLING_OPTION ::= [Title =>] STRING_LITERAL, | [Subtitle =>] STRING_LITERAL Syntax checked but otherwise ignored by GNAT. This is a listing control pragma used in DEC Ada 83 implementations to provide a title and/or subtitle for the program listing. The program listing generated by GNAT does not have titles or subtitles. Unlike other pragmas, the full flexibility of named notation is allowed for this pragma, i.e., the parameters may be given in any order if named notation is used, and named and positional notation can be mixed following the normal rules for procedure calls in Ada. Pragma Type_Invariant ===================== Syntax: :: pragma Type_Invariant ([Entity =>] type_LOCAL_NAME, [Check =>] EXPRESSION); The ``Type_Invariant`` pragma is intended to be an exact replacement for the language-defined ``Type_Invariant`` aspect, and shares its restrictions and semantics. It differs from the language defined ``Invariant`` pragma in that it does not permit a string parameter, and it is controlled by the assertion identifier ``Type_Invariant`` rather than ``Invariant``. .. _Pragma-Type_Invariant_Class: Pragma Type_Invariant_Class =========================== Syntax: :: pragma Type_Invariant_Class ([Entity =>] type_LOCAL_NAME, [Check =>] EXPRESSION); The ``Type_Invariant_Class`` pragma is intended to be an exact replacement for the language-defined ``Type_Invariant'Class`` aspect, and shares its restrictions and semantics. Note: This pragma is called ``Type_Invariant_Class`` rather than ``Type_Invariant'Class`` because the latter would not be strictly conforming to the allowed syntax for pragmas. The motivation for providing pragmas equivalent to the aspects is to allow a program to be written using the pragmas, and then compiled if necessary using an Ada compiler that does not recognize the pragmas or aspects, but is prepared to ignore the pragmas. The assertion policy that controls this pragma is ``Type_Invariant'Class``, not ``Type_Invariant_Class``. Pragma Unchecked_Union ====================== .. index:: Unions in C Syntax: .. code-block:: ada pragma Unchecked_Union (first_subtype_LOCAL_NAME); This pragma is used to specify a representation of a record type that is equivalent to a C union. It was introduced as a GNAT implementation defined pragma in the GNAT Ada 95 mode. Ada 2005 includes an extended version of this pragma, making it language defined, and GNAT fully implements this extended version in all language modes (Ada 83, Ada 95, and Ada 2005). For full details, consult the Ada 2012 Reference Manual, section B.3.3. Pragma Unevaluated_Use_Of_Old ============================= .. index:: Attribute Old .. index:: Attribute Loop_Entry .. index:: Unevaluated_Use_Of_Old Syntax: .. code-block:: ada pragma Unevaluated_Use_Of_Old (Error | Warn | Allow); This pragma controls the processing of attributes Old and Loop_Entry. If either of these attributes is used in a potentially unevaluated expression (e.g. the then or else parts of an if expression), then normally this usage is considered illegal if the prefix of the attribute is other than an entity name. The language requires this behavior for Old, and GNAT copies the same rule for Loop_Entry. The reason for this rule is that otherwise, we can have a situation where we save the Old value, and this results in an exception, even though we might not evaluate the attribute. Consider this example: .. code-block:: ada package UnevalOld is K : Character; procedure U (A : String; C : Boolean) -- ERROR with Post => (if C then A(1)'Old = K else True); end; If procedure U is called with a string with a lower bound of 2, and C false, then an exception would be raised trying to evaluate A(1) on entry even though the value would not be actually used. Although the rule guarantees against this possibility, it is sometimes too restrictive. For example if we know that the string has a lower bound of 1, then we will never raise an exception. The pragma ``Unevaluated_Use_Of_Old`` can be used to modify this behavior. If the argument is ``Error`` then an error is given (this is the default RM behavior). If the argument is ``Warn`` then the usage is allowed as legal but with a warning that an exception might be raised. If the argument is ``Allow`` then the usage is allowed as legal without generating a warning. This pragma may appear as a configuration pragma, or in a declarative part or package specification. In the latter case it applies to uses up to the end of the corresponding statement sequence or sequence of package declarations. Pragma User_Aspect_Definition ============================= Syntax: .. code-block:: ada pragma User_Aspect_Definition (Identifier {, Identifier [(Identifier {, Identifier})]}); This configuration pragma defines a new aspect, making it available for subsequent use in a `User_Aspect` aspect specification. The first identifier is the name of the new aspect. Any subsequent arguments specify the names of other aspects. A subsequent name for which no parenthesized arguments are given shall denote either a Boolean-valued non-representation aspect or an aspect that has been defined by another `User_Aspect_Definition` pragma. A name for which one or more arguments are given shall be either `Annotate` or `Local_Restrictions` (and the arguments shall be appropriate for the named aspect). This pragma, together with the `User_Aspect` aspect, provides a mechanism for avoiding textual duplication if some set of aspect specifications is needed in multiple places. This is somewhat analogous to how profiles allow avoiding duplication of `Restrictions` pragmas. The visibility rules for an aspect defined by a `User_Aspect_Definition` pragma are the same as for a check name introduced by a `Check_Name` pragma. If multiple definitions are visible for some aspect at some point, then the definitions must agree. A predefined aspect cannot be redefined. Pragma Unimplemented_Unit ========================= Syntax: .. code-block:: ada pragma Unimplemented_Unit; If this pragma occurs in a unit that is processed by the compiler, GNAT aborts with the message :samp:`xxx not implemented`, where ``xxx`` is the name of the current compilation unit. This pragma is intended to allow the compiler to handle unimplemented library units in a clean manner. The abort only happens if code is being generated. Thus you can use specs of unimplemented packages in syntax or semantic checking mode. .. _Pragma-Universal_Aliasing: Pragma Universal_Aliasing ========================= Syntax: :: pragma Universal_Aliasing [([Entity =>] type_LOCAL_NAME)]; ``type_LOCAL_NAME`` must refer to a type declaration in the current declarative part. The effect is to inhibit strict type-based aliasing optimizations for the given type. For a detailed description of the strict type-based aliasing optimizations and the situations in which they need to be suppressed, see the section on ``Optimization and Strict Aliasing`` in the :title:`GNAT User's Guide`. .. _Pragma-Unmodified: Pragma Unmodified ================= .. index:: Warnings, unmodified Syntax: :: pragma Unmodified (LOCAL_NAME {, LOCAL_NAME}); This pragma signals that the assignable entities (variables, ``out`` parameters, ``in out`` parameters) whose names are listed are deliberately not assigned in the current source unit. This suppresses warnings about the entities being referenced but not assigned, and in addition a warning will be generated if one of these entities is in fact assigned in the same unit as the pragma (or in the corresponding body, or one of its subunits). This is particularly useful for clearly signaling that a particular parameter is not modified, even though the spec suggests that it might be. For the variable case, warnings are never given for unreferenced variables whose name contains one of the substrings ``DISCARD, DUMMY, IGNORE, JUNK, UNUSE, TMP, TEMP`` in any casing. Such names are typically to be used in cases where such warnings are expected. Thus it is never necessary to use ``pragma Unmodified`` for such variables, though it is harmless to do so. .. _Pragma-Unreferenced: Pragma Unreferenced =================== .. index:: Warnings, unreferenced Syntax: :: pragma Unreferenced (LOCAL_NAME {, LOCAL_NAME}); pragma Unreferenced (library_unit_NAME {, library_unit_NAME}); This pragma signals that the entities whose names are listed are deliberately not referenced in the current source unit after the occurrence of the pragma. This suppresses warnings about the entities being unreferenced, and in addition a warning will be generated if one of these entities is in fact subsequently referenced in the same unit as the pragma (or in the corresponding body, or one of its subunits). This is particularly useful for clearly signaling that a particular parameter is not referenced in some particular subprogram implementation and that this is deliberate. It can also be useful in the case of objects declared only for their initialization or finalization side effects. If ``LOCAL_NAME`` identifies more than one matching homonym in the current scope, then the entity most recently declared is the one to which the pragma applies. Note that in the case of accept formals, the pragma Unreferenced may appear immediately after the keyword ``do`` which allows the indication of whether or not accept formals are referenced or not to be given individually for each accept statement. The left hand side of an assignment does not count as a reference for the purpose of this pragma. Thus it is fine to assign to an entity for which pragma Unreferenced is given. However, use of an entity as an actual for an out parameter does count as a reference unless warnings for unread output parameters are enabled via :switch:`-gnatw.o`. Note that if a warning is desired for all calls to a given subprogram, regardless of whether they occur in the same unit as the subprogram declaration, then this pragma should not be used (calls from another unit would not be flagged); pragma Obsolescent can be used instead for this purpose, see :ref:`Pragma_Obsolescent`. The second form of pragma ``Unreferenced`` is used within a context clause. In this case the arguments must be unit names of units previously mentioned in ``with`` clauses (similar to the usage of pragma ``Elaborate_All``). The effect is to suppress warnings about unreferenced units and unreferenced entities within these units. For the variable case, warnings are never given for unreferenced variables whose name contains one of the substrings ``DISCARD, DUMMY, IGNORE, JUNK, UNUSED`` in any casing. Such names are typically to be used in cases where such warnings are expected. Thus it is never necessary to use ``pragma Unreferenced`` for such variables, though it is harmless to do so. .. _Pragma-Unreferenced_Objects: Pragma Unreferenced_Objects =========================== .. index:: Warnings, unreferenced Syntax: :: pragma Unreferenced_Objects (local_subtype_NAME {, local_subtype_NAME}); This pragma signals that for the types or subtypes whose names are listed, objects which are declared with one of these types or subtypes may not be referenced, and if no references appear, no warnings are given. This is particularly useful for objects which are declared solely for their initialization and finalization effect. Such variables are sometimes referred to as RAII variables (Resource Acquisition Is Initialization). Using this pragma on the relevant type (most typically a limited controlled type), the compiler will automatically suppress unwanted warnings about these variables not being referenced. Pragma Unreserve_All_Interrupts =============================== Syntax: .. code-block:: ada pragma Unreserve_All_Interrupts; Normally certain interrupts are reserved to the implementation. Any attempt to attach an interrupt causes Program_Error to be raised, as described in RM C.3.2(22). A typical example is the ``SIGINT`` interrupt used in many systems for a :kbd:`Ctrl-C` interrupt. Normally this interrupt is reserved to the implementation, so that :kbd:`Ctrl-C` can be used to interrupt execution. If the pragma ``Unreserve_All_Interrupts`` appears anywhere in any unit in a program, then all such interrupts are unreserved. This allows the program to handle these interrupts, but disables their standard functions. For example, if this pragma is used, then pressing :kbd:`Ctrl-C` will not automatically interrupt execution. However, a program can then handle the ``SIGINT`` interrupt as it chooses. For a full list of the interrupts handled in a specific implementation, see the source code for the spec of ``Ada.Interrupts.Names`` in file :file:`a-intnam.ads`. This is a target dependent file that contains the list of interrupts recognized for a given target. The documentation in this file also specifies what interrupts are affected by the use of the ``Unreserve_All_Interrupts`` pragma. For a more general facility for controlling what interrupts can be handled, see pragma ``Interrupt_State``, which subsumes the functionality of the ``Unreserve_All_Interrupts`` pragma. Pragma Unsuppress ================= Syntax: :: pragma Unsuppress (IDENTIFIER [, [On =>] NAME]); This pragma undoes the effect of a previous pragma ``Suppress``. If there is no corresponding pragma ``Suppress`` in effect, it has no effect. The range of the effect is the same as for pragma ``Suppress``. The meaning of the arguments is identical to that used in pragma ``Suppress``. One important application is to ensure that checks are on in cases where code depends on the checks for its correct functioning, so that the code will compile correctly even if the compiler switches are set to suppress checks. For example, in a program that depends on external names of tagged types and wants to ensure that the duplicated tag check occurs even if all run-time checks are suppressed by a compiler switch, the following configuration pragma will ensure this test is not suppressed: .. code-block:: ada pragma Unsuppress (Duplicated_Tag_Check); This pragma is standard in Ada 2005. It is available in all earlier versions of Ada as an implementation-defined pragma. Note that in addition to the checks defined in the Ada RM, GNAT recognizes a number of implementation-defined check names. See the description of pragma ``Suppress`` for full details. .. _Pragma-Unused: Pragma Unused ============= .. index:: Warnings, unused Syntax: :: pragma Unused (LOCAL_NAME {, LOCAL_NAME}); This pragma signals that the assignable entities (variables, ``out`` parameters, and ``in out`` parameters) whose names are listed deliberately do not get assigned or referenced in the current source unit after the occurrence of the pragma in the current source unit. This suppresses warnings about the entities that are unreferenced and/or not assigned, and, in addition, a warning will be generated if one of these entities gets assigned or subsequently referenced in the same unit as the pragma (in the corresponding body or one of its subunits). This is particularly useful for clearly signaling that a particular parameter is not modified or referenced, even though the spec suggests that it might be. For the variable case, warnings are never given for unreferenced variables whose name contains one of the substrings ``DISCARD, DUMMY, IGNORE, JUNK, UNUSED`` in any casing. Such names are typically to be used in cases where such warnings are expected. Thus it is never necessary to use ``pragma Unused`` for such variables, though it is harmless to do so. Pragma Use_VADS_Size ==================== .. index:: Size, VADS compatibility .. index:: Rational profile Syntax: .. code-block:: ada pragma Use_VADS_Size; This is a configuration pragma. In a unit to which it applies, any use of the 'Size attribute is automatically interpreted as a use of the 'VADS_Size attribute. Note that this may result in incorrect semantic processing of valid Ada 95 or Ada 2005 programs. This is intended to aid in the handling of existing code which depends on the interpretation of Size as implemented in the VADS compiler. See description of the VADS_Size attribute for further details. Pragma Validity_Checks ====================== Syntax: .. code-block:: ada pragma Validity_Checks (string_LITERAL | ALL_CHECKS | On | Off); This pragma is used in conjunction with compiler switches to control the built-in validity checking provided by GNAT. The compiler switches, if set provide an initial setting for the switches, and this pragma may be used to modify these settings, or the settings may be provided entirely by the use of the pragma. This pragma can be used anywhere that a pragma is legal, including use as a configuration pragma (including use in the :file:`gnat.adc` file). The form with a string literal specifies which validity options are to be activated. The validity checks are first set to include only the default reference manual settings, and then a string of letters in the string specifies the exact set of options required. The form of this string is exactly as described for the *-gnatVx* compiler switch (see the GNAT User's Guide for details). For example the following two methods can be used to enable validity checking for mode ``in`` and ``in out`` subprogram parameters: * .. code-block:: ada pragma Validity_Checks ("im"); * .. code-block:: sh $ gcc -c -gnatVim ... The form ALL_CHECKS activates all standard checks (its use is equivalent to the use of the :switch:`gnatVa` switch). The forms with ``Off`` and ``On`` can be used to temporarily disable validity checks as shown in the following example: .. code-block:: ada pragma Validity_Checks ("c"); -- validity checks for copies pragma Validity_Checks (Off); -- turn off validity checks A := B; -- B will not be validity checked pragma Validity_Checks (On); -- turn validity checks back on A := C; -- C will be validity checked .. _Pragma-Volatile: Pragma Volatile =============== Syntax: .. code-block:: ada pragma Volatile (LOCAL_NAME); This pragma is defined by the Ada Reference Manual, and the GNAT implementation is fully conformant with this definition. The reason it is mentioned in this section is that a pragma of the same name was supplied in some Ada 83 compilers, including DEC Ada 83. The Ada 95 / Ada 2005 implementation of pragma Volatile is upwards compatible with the implementation in DEC Ada 83. .. _Pragma-Volatile_Full_Access: Pragma Volatile_Full_Access =========================== Syntax: .. code-block:: ada pragma Volatile_Full_Access (LOCAL_NAME); This is similar in effect to pragma Volatile, except that any reference to the object is guaranteed to be done only with instructions that read or write all the bits of the object. Furthermore, if the object is of a composite type, then any reference to a subcomponent of the object is guaranteed to read and/or write all the bits of the object. The intention is that this be suitable for use with memory-mapped I/O devices on some machines. Note that there are two important respects in which this is different from ``pragma Atomic``. First a reference to a ``Volatile_Full_Access`` object is not a sequential action in the RM 9.10 sense and, therefore, does not create a synchronization point. Second, in the case of ``pragma Atomic``, there is no guarantee that all the bits will be accessed if the reference is not to the whole object; the compiler is allowed (and generally will) access only part of the object in this case. .. _Pragma-Volatile_Function: Pragma Volatile_Function ======================== Syntax: .. code-block:: ada pragma Volatile_Function [ (static_boolean_EXPRESSION) ]; For the semantics of this pragma, see the entry for aspect ``Volatile_Function`` in the SPARK 2014 Reference Manual, section 7.1.2. Pragma Warning_As_Error ======================= Syntax: .. code-block:: ada pragma Warning_As_Error (static_string_EXPRESSION); This configuration pragma allows the programmer to specify a set of warnings that will be treated as errors. Any warning that matches the pattern given by the pragma argument will be treated as an error. This gives more precise control than -gnatwe, which treats warnings as errors. This pragma can apply to regular warnings (messages enabled by -gnatw) and to style warnings (messages that start with "(style)", enabled by -gnaty). The pattern may contain asterisks, which match zero or more characters in the message. For example, you can use ``pragma Warning_As_Error ("bits of*unused")`` to treat the warning message ``warning: 960 bits of "a" unused`` as an error. All characters other than asterisk are treated as literal characters in the match. The match is case insensitive; for example XYZ matches xyz. Note that the pattern matches if it occurs anywhere within the warning message string (it is not necessary to put an asterisk at the start and the end of the message, since this is implied). Another possibility for the static_string_EXPRESSION which works whether or not error tags are enabled (*-gnatw.d*) is to use a single *-gnatw* tag string, enclosed in brackets, as shown in the example below, to treat one category of warnings as errors. Note that if you want to treat multiple categories of warnings as errors, you can use multiple pragma Warning_As_Error. The above use of patterns to match the message applies only to warning messages generated by the front end. This pragma can also be applied to warnings provided by the back end and mentioned in :ref:`Pragma_Warnings`. By using a single full *-Wxxx* switch in the pragma, such warnings can also be treated as errors. The pragma can appear either in a global configuration pragma file (e.g. :file:`gnat.adc`), or at the start of a file. Given a global configuration pragma file containing: .. code-block:: ada pragma Warning_As_Error ("[-gnatwj]"); which will treat all obsolescent feature warnings as errors, the following program compiles as shown (compile options here are *-gnatwa.d -gnatl -gnatj55*). :: 1. pragma Warning_As_Error ("*never assigned*"); 2. function Warnerr return String is 3. X : Integer; | >>> error: variable "X" is never read and never assigned [-gnatwv] [warning-as-error] 4. Y : Integer; | >>> warning: variable "Y" is assigned but never read [-gnatwu] 5. begin 6. Y := 0; 7. return %ABC%; | >>> error: use of "%" is an obsolescent feature (RM J.2(4)), use """ instead [-gnatwj] [warning-as-error] 8. end; 8 lines: No errors, 3 warnings (2 treated as errors) Note that this pragma does not affect the set of warnings issued in any way, it merely changes the effect of a matching warning if one is produced as a result of other warnings options. As shown in this example, if the pragma results in a warning being treated as an error, the tag is changed from "warning:" to "error:" and the string "[warning-as-error]" is appended to the end of the message. .. _Pragma_Warnings: Pragma Warnings =============== Syntax: .. code-block:: ada pragma Warnings ([TOOL_NAME,] DETAILS [, REASON]); DETAILS ::= On | Off DETAILS ::= On | Off, local_NAME DETAILS ::= static_string_EXPRESSION DETAILS ::= On | Off, static_string_EXPRESSION TOOL_NAME ::= GNAT | GNATprove REASON ::= Reason => STRING_LITERAL {& STRING_LITERAL} Note: in Ada 83 mode, a string literal may be used in place of a static string expression (which does not exist in Ada 83). Note if the second argument of ``DETAILS`` is a ``local_NAME`` then the second form is always understood. If the intention is to use the fourth form, then you can write ``NAME & ""`` to force the interpretation as a *static_string_EXPRESSION*. Note: if the first argument is a valid ``TOOL_NAME``, it will be interpreted that way. The use of the ``TOOL_NAME`` argument is relevant only to users of SPARK and GNATprove, see last part of this section for details. Normally warnings are enabled, with the output being controlled by the command line switch. Warnings (``Off``) turns off generation of warnings until a Warnings (``On``) is encountered or the end of the current unit. If generation of warnings is turned off using this pragma, then some or all of the warning messages are suppressed, regardless of the setting of the command line switches. The ``Reason`` parameter may optionally appear as the last argument in any of the forms of this pragma. It is intended purely for the purposes of documenting the reason for the ``Warnings`` pragma. The compiler will check that the argument is a static string but otherwise ignore this argument. Other tools may provide specialized processing for this string. The form with a single argument (or two arguments if Reason present), where the first argument is ``ON`` or ``OFF`` may be used as a configuration pragma. If the ``LOCAL_NAME`` parameter is present, warnings are suppressed for the specified entity. This suppression is effective from the point where it occurs till the end of the extended scope of the variable (similar to the scope of ``Suppress``). This form cannot be used as a configuration pragma. In the case where the first argument is other than ``ON`` or ``OFF``, the third form with a single static_string_EXPRESSION argument (and possible reason) provides more precise control over which warnings are active. The string is a list of letters specifying which warnings are to be activated and which deactivated. The code for these letters is the same as the string used in the command line switch controlling warnings. For a brief summary, use the gnatmake command with no arguments, which will generate usage information containing the list of warnings switches supported. For full details see the section on ``Warning Message Control`` in the :title:`GNAT User's Guide`. This form can also be used as a configuration pragma. The warnings controlled by the :switch:`-gnatw` switch are generated by the front end of the compiler. The GCC back end can provide additional warnings and they are controlled by the :switch:`-W` switch. Such warnings can be identified by the appearance of a string of the form ``[-W{xxx}]`` in the message which designates the :switch:`-W{xxx}` switch that controls the message. The form with a single *static_string_EXPRESSION* argument also works for these warnings, but the string must be a single full :switch:`-W{xxx}` switch in this case. The above reference lists a few examples of these additional warnings. The specified warnings will be in effect until the end of the program or another pragma ``Warnings`` is encountered. The effect of the pragma is cumulative. Initially the set of warnings is the standard default set as possibly modified by compiler switches. Then each pragma Warning modifies this set of warnings as specified. This form of the pragma may also be used as a configuration pragma. The fourth form, with an ``On|Off`` parameter and a string, is used to control individual messages, based on their text. The string argument is a pattern that is used to match against the text of individual warning messages (not including the initial "warning: " tag). The pattern may contain asterisks, which match zero or more characters in the message. For example, you can use ``pragma Warnings (Off, "bits of*unused")`` to suppress the warning message ``warning: 960 bits of "a" unused``. No other regular expression notations are permitted. All characters other than asterisk in these three specific cases are treated as literal characters in the match. The match is case insensitive, for example XYZ matches xyz. Note that the pattern matches if it occurs anywhere within the warning message string (it is not necessary to put an asterisk at the start and the end of the message, since this is implied). The above use of patterns to match the message applies only to warning messages generated by the front end. This form of the pragma with a string argument can also be used to control warnings provided by the back end and mentioned above. By using a single full :switch:`-W{xxx}` switch in the pragma, such warnings can be turned on and off. There are two ways to use the pragma in this form. The OFF form can be used as a configuration pragma. The effect is to suppress all warnings (if any) that match the pattern string throughout the compilation (or match the -W switch in the back end case). The second usage is to suppress a warning locally, and in this case, two pragmas must appear in sequence: .. code-block:: ada pragma Warnings (Off, Pattern); ... code where given warning is to be suppressed pragma Warnings (On, Pattern); In this usage, the pattern string must match in the Off and On pragmas, and (if *-gnatw.w* is given) at least one matching warning must be suppressed. Note: if the ON form is not found, then the effect of the OFF form extends until the end of the file (pragma Warnings is purely textual, so its effect does not stop at the end of the enclosing scope). Note: to write a string that will match any warning, use the string ``"***"``. It will not work to use a single asterisk or two asterisks since this looks like an operator name. This form with three asterisks is similar in effect to specifying ``pragma Warnings (Off)`` except (if :switch:`-gnatw.w` is given) that a matching ``pragma Warnings (On, "***")`` will be required. This can be helpful in avoiding forgetting to turn warnings back on. Note: the debug flag :switch:`-gnatd.i` can be used to cause the compiler to entirely ignore all WARNINGS pragmas. This can be useful in checking whether obsolete pragmas in existing programs are hiding real problems. Note: pragma Warnings does not affect the processing of style messages. See separate entry for pragma Style_Checks for control of style messages. Users of the formal verification tool GNATprove for the SPARK subset of Ada may use the version of the pragma with a ``TOOL_NAME`` parameter. If present, ``TOOL_NAME`` is the name of a tool, currently either ``GNAT`` for the compiler or ``GNATprove`` for the formal verification tool. A given tool only takes into account pragma Warnings that do not specify a tool name, or that specify the matching tool name. This makes it possible to disable warnings selectively for each tool, and as a consequence to detect useless pragma Warnings with switch :switch:`-gnatw.w`. Pragma Weak_External ==================== Syntax: .. code-block:: ada pragma Weak_External ([Entity =>] LOCAL_NAME); ``LOCAL_NAME`` must refer to an object that is declared at the library level. This pragma specifies that the given entity should be marked as a weak symbol for the linker. It is equivalent to ``__attribute__((weak))`` in GNU C and causes ``LOCAL_NAME`` to be emitted as a weak symbol instead of a regular symbol, that is to say a symbol that does not have to be resolved by the linker if used in conjunction with a pragma Import. When a weak symbol is not resolved by the linker, its address is set to zero. This is useful in writing interfaces to external modules that may or may not be linked in the final executable, for example depending on configuration settings. If a program references at run time an entity to which this pragma has been applied, and the corresponding symbol was not resolved at link time, then the execution of the program is erroneous. It is not erroneous to take the Address of such an entity, for example to guard potential references, as shown in the example below. Some file formats do not support weak symbols so not all target machines support this pragma. .. code-block:: ada -- Example of the use of pragma Weak_External package External_Module is key : Integer; pragma Import (C, key); pragma Weak_External (key); function Present return boolean; end External_Module; with System; use System; package body External_Module is function Present return boolean is begin return key'Address /= System.Null_Address; end Present; end External_Module; Pragma Wide_Character_Encoding ============================== Syntax: .. code-block:: ada pragma Wide_Character_Encoding (IDENTIFIER | CHARACTER_LITERAL); This pragma specifies the wide character encoding to be used in program source text appearing subsequently. It is a configuration pragma, but may also be used at any point that a pragma is allowed, and it is permissible to have more than one such pragma in a file, allowing multiple encodings to appear within the same file. However, note that the pragma cannot immediately precede the relevant wide character, because then the previous encoding will still be in effect, causing "illegal character" errors. The argument can be an identifier or a character literal. In the identifier case, it is one of ``HEX``, ``UPPER``, ``SHIFT_JIS``, ``EUC``, ``UTF8``, or ``BRACKETS``. In the character literal case it is correspondingly one of the characters :kbd:`h`, :kbd:`u`, :kbd:`s`, :kbd:`e`, :kbd:`8`, or :kbd:`b`. Note that when the pragma is used within a file, it affects only the encoding within that file, and does not affect withed units, specs, or subunits.