8. Ada Distributed Systems Annex (DSA)

8.1. Introduction to the Ada DSA

A critical feature of the Distributed Systems Annex (DSA) is that it allows the user to develop his application the same way whether this application is going to be executed as several programs on a distributed system, or as a single program on a non-distributed system. The DSA has been designed to minimize the source changes needed to convert an ordinary non-distributed program into a distributed program.

The simplest way to start with DSA is to develop the application on a non-distributed system. Of course, the design of the application should take into account the fact that some units are going to be accessed remotely. In order to write a distributed Ada program, it is necessary for the user to label by means of categorization pragmas some of library level compilation units of the application program. The units that require categorization are typically those that are called remotely, and those that provide the types used in remote invocations.

In order to ensure that distributed execution is possible, these units are restricted to contain only a limited set of Ada constructs. For instance, if the distributed system has no shared memory, shared variables must be forbidden. To specify the nature of these restrictions, the DSA provides several categorization pragmas, each of which excludes some language constructs from the categorized package.

Of course, the user can develop the non-distributed application with his usual software engineering environment. It is critical to note that the user needs no specialized tools to develop his/her distributed application. For instance, he can debug his application with the usual debugger. Note that a non-distributed program is not to be confused with a distributed application composed of only one program. The latter is built with the help of the configuration tool and includes the communication library.

Once the non-distributed version of the program is complete, it has to be configured into separate partitions. This step is surprisingly simple, compared to that of developing the application itself. The configuration step consists of mapping sets of compilation units into individual partitions, and specifying the mapping between partitions and nodes in the computer network. This mapping is specified and managed by means of a gnatdist configuration.

The distributed version of the user application should work as is, but even when a program can be built both as a non-distributed or a distributed program using the same source code, there may still be differences in program execution between the distributed and non-distributed versions. These differences are discussed in subsequent sections (see Pragma Asynchronous and Pragma All_Calls_Remote).

Developing a non-distributed application in order to distribute it later is the natural approach for a novice. Of course, it is not always possible to write a distributed application as a non-distributed application. For instance, a client/server application does not belong to this category because several instances of the client can be active at the same time. It is very easy to develop such an application using PolyORB; we shall describe how to do this in the following sections.

8.1.1. Architecture of a Distributed Ada Application

A distributed system is an interconnection of one or more processing nodes and zero or more storage nodes. A distributed program comprises one or more partitions. A partition is an aggregate of library units. Partitions communicate through shared data or RPCs. A passive partition has no thread of control. Only a passive partition can be configured on a storage node. An active partition has zero or more threads of control and has to be configured on a processing node.

The library unit is the core component of a distributed Ada application. The user can explicitly assign library units to a partition. Partitioning is a post-compilation process. The user identifies interface packages at compile-time. These packages are categorized using pragmas. Each of these pragmas supports the use of one of the following classical paradigms:

  • Remote subprograms: For the programmer, a remote subprogram call is similar to a regular subprogram call. Run-time binding using access-to-subprogram types can also be used with remote subprograms. These remote subprograms are declared in library units categorized as remote call interface (RCI).
  • Distributed objects: Special-purpose access types can designate remote objects. When a primitive dispatching operation is invoked on an object designated by such a remote access, a remote call is performed transparently on the partition on which the object resides. The types of these distributed objects are declared in library units categorized as remote types (RT).
  • Shared objects: Global data can be shared among active partitions, providing a repository similar to shared memory, a shared file system or a database. Entryless protected objects allow safe concurrent access and update of shared objects. This feature is orthogonal to the notion of distributed objects, which are only accessed through exported services. These shared objects are declared in library units categorized as shared passive (SP).

The remotely-called subprograms declared in a library unit categorized as remote call interface (RCI) or remote types (RT) may be either statically or dynamically bound. The partition on which a statically bound remote subprogram is executed can be determined before the call. This is a static remote subprogram call. In contrast, a remote method or a dereference of an access to remote subprogram are dynamically bound remote calls, because the partition on which the remote subprogram is executed is determined at runtime, by the actuals of the call.

In the following example, Data_1 and Data_2 are shared passive (SP) library units. Data_1 is configured on a passive partition mapped on a storage node. Partition_1 and Partition_2 are active partitions. Note that under some circumstances, a partition, for instance Partition_2, can be duplicated. To be duplicated, Unit_2 and Unit_3 which are configured on Partition_2 have to provide only dynamically bound remote subprograms. Otherwise, a partition calling a remote subprogram on Unit_2 would not be able to statically determine where to perform the remote call between the two instances of Unit_2.

8.1.2. Categorization Pragmas

Library units can be categorized according to the role they play in a distributed program. A categorization pragma is a library unit pragma that restricts the kinds of declarations that can appear in a library unit and possibly in its child units, as well as the legal semantic dependences that the categorized unit can have. There are several categorization pragmas:

  • Remote_Call_Interface
  • Remote_Types
  • Shared_Passive
  • Pure

The following paragraphs do not present the detailed semantics of these pragmas (formal details will be found in the Ada Reference Manual). Their purpose is to give the reader an intuitive overview of the purpose of these pragmas. If a library unit is not categorized, this unit is called a normal unit and plays no special role in the distributed application. Such a unit is duplicated on any partition in which it is mentioned.

A parenthetical remark: to avoid the need for specific run-time libraries for the DSA, the notion of remote rendezvous does not exist in Ada: tasks cannot be invoked directly from one partition to another. Therefore, declarations of task types and general protected types with entries are not allowed in categorized Ada library units.

8.1.3. Pragma Declared Pure

This pragma is not specific to the Distributed Systems Annex. A pure package can appear in the context of any package, categorized or not. A pure package is a preelaborable package that does not contain variable data. It is particularly useful to define types, constants and subprograms shared by several categorized packages. In contrast, normal packages cannot appear in the context of categorized package declarations. Because a pure package has no state, it can be duplicated on several partitions.

8.1.4. Pragma Remote_Call_Interface

8.1.4.1. Overview of Pragma Remote_Call_Interface

Library units categorized with this pragma declare subprograms that can be called and executed remotely. An RCI unit acts as a server for remote calls. There is no memory space shared between server and clients. A subprogram call that invokes one such subprogram is a classical RPC operation; it is a statically bound operation, because the compiler can determine the identity of the subprogram being called.

Dynamically bound calls are provided through two mechanisms:

  • The dereference of an access-to-subprogram value, i.e. a value whose type is a remote access-to-subprogram (RAS).
  • A dispatching call whose controlling argument is an access-to-class-wide operand. The formal is a remote access-to-class-wide (RACW) type. These remote access types can be declared in RCI packages as well.

A remote access type (RAS or RACW) can be viewed as a fat pointer, that is to say a structure with a remote address and a local address (like a URL: <protocol>://<remote-machine>/<local-directory>). The remote address must denote the host of the partition on which the entity has been created; the local address describes the local memory address within the host.

It is very unlikely that RCI units can be duplicated in the distributed system. An implementation may allow separate copies of a RCI unit as long as it ensures that the copies present a consistent state to all clients. In the general case, preserving consistency is very costly. For this reason, the implementation may require a RCI unit to be unique in the distributed system.

8.1.4.2. Regular Remote Subprograms (RCI)

In the following example, a RCIBank offers several remote services: Balance, Transfer, Deposit and Withdraw. On the caller side, the bank client uses the stub files of unit RCIBank. On the receiver side, the bank receiver uses the skeleton files of unit RCIBank including the body of this package.

package Types is
   pragma Pure;

   type Customer_Type is new String;
   type Password_Type is new String;
end Types;
with Types; use Types;
package RCIBank is
   pragma Remote_Call_Interface;

   function Balance
     (Customer : in Customer_Type;
      Password : in Password_Type)
      return Integer;

   procedure Transfer
     (Payer    : in Customer_Type;
      Password : in Password_Type;
      Amount   : in Positive;
      Payee    : in Customer_Type);

   procedure Deposit
     (Customer : in Customer_Type;
      Amount   : in Positive);

   procedure Withdraw
     (Customer : in Customer_Type;
      Password : in Password_Type;
      Amount   : in out Positive);
end RCIBank;
with Types; use Types;
with RCIBank; use RCIBank;
procedure RCIClient is
   B : Integer;
   C : Customer_Type := "rich";
   P : Password_Type := "xxxx";
begin
   B := Balance (C, P);
end RCIClient;

8.1.4.3. Remote Access to Subprograms (RAS)

In the following example, several mirroring banks offer their services through the same database. Each bank registers a reference to each of its services with a central bank. A client of the central bank requests a service from one of the mirroring banks. To satisfy requests, the RCI unit RASBank defines Balance_Type, a remote access to subprogram. (Recall that an access type declared in a remote unit has to be either remote access to subprogram or remote access to class wide type).

Note that to obtain a remote access to subprogram, the subprogram that delivers the remote access must be remote itself. Therefore, MirrorBank is a RCI library unit.

with Types; use Types;
package RASBank is
   pragma Remote_Call_Interface;

   type Balance_Type is access function
     (Customer : in Customer_Type;
      Password : in Password_Type)
      return Integer;

   procedure Register
      (Balance : in Balance_Type);

   function Get_Balance
      return Balance_Type;

   --  [...] Other services
end RASBank;

In the code below, a mirroring bank registers its services to the central bank.

with Types; use Types;
package MirrorBank is
   pragma Remote_Call_Interface;

   function Balance
     (Customer : in Customer_Type;
      Password : in Password_Type)
      return Integer;

   --  [...] Other services
end MirrorBank;
with RASBank, Types; use RASBank, Types;
package body MirrorBank is

   function Balance
     (Customer : in Customer_Type;
      Password : in Password_Type)
      return Integer is
   begin
      return Something;
   end Balance;

begin
   --  Register a dynamically bound remote subprogram (Balance)
   --  through a statically bound remote subprogram (Register)
   Register (Balance'Access);
   --  [...] Register other services
end MirrorBank;

In the code below, a central bank client asks for a mirroring bank and calls the Balance service of this bank by dereferencing a remote access type.

with Types; use Types;
with RASBank; use RASBank;
procedure BankClient is
   B : Integer;
   C : Customer_Type := "rich";
   P : Password_Type := "xxxx";
begin
   --  Through a statically bound remote subprogram (Get_Balance), get
   --  a dynamically bound remote subprogram. Dereference it to
   --  perform a dynamic invocation.
   B := Get_Balance.all (C, P);
end BankClient;

8.1.4.4. Remote Access to Class Wide Types (RACW)

A bank client is now connected to a bank through a terminal. The bank wants to notify a connected client, by means of a message on its terminal, when another client transfers a given amount of money to its account. In the following example, a terminal is designed as a distributed object. Each bank client will register its terminal object to the bank server for further use. In the code below, Term_Type is the root type of the distributed terminal hierarchy.

with Types; use Types;
package Terminal is
   pragma Pure;

   type Term_Type is abstract tagged limited private;

   procedure Notify
     (MyTerm   : access Term_Type;
      Payer    : in Customer_Type;
      Amount   : in Integer) is abstract;

private
   type Term_Type is abstract tagged limited null record;
end Terminal;

In the code below, the RCI unit RACWBank defines Term_Access, a remote access to class wide type. Term_Access becomes a reference to a distributed object. In the next section, we will see how to derive and extend Term_Type, how to create a distributed object and how to use a reference to it.

with Terminal, Types; use Terminal, Types;
package RACWBank is
   pragma Remote_Call_Interface;

   type Term_Access is access all Term_Type'Class;

   procedure Register
     (MyTerm   : in Term_Access;
      Customer : in Customer_Type;
      Password : in Password_Type);

   --  [...] Other services
end RACWBank;

8.1.4.5. Summary of Pragma Remote_Call_Interface

Remote call interface units:

  • Allow subprograms to be called and executed remotely
  • Allow statically bound remote calls (remote subprogram)
  • Allow dynamically bound remote calls (remote access types)
  • Forbid variables and non-remote access types
  • Prevent specification from depending on normal units

8.1.5. Pragma Remote_Types

8.1.5.1. Overview of Pragma Remote_Types

Unlike RCI units, library units categorized with this pragma can define distributed objects and remote methods on them. Both RCI and RT units can define a remote access type as described above (RACW). A subprogram defined in a RT unit is not a remote subprogram. Unlike RCI units, a RT unit can be duplicated on several partitions, in which case all its entities are distinct. This unit is duplicated on each partition in which it is defined.

8.1.5.2. Distributed Object

If we want to implement the notification feature proposed in the previous section, we have to derive Term_Type. Such a derivation is possible in a remote types unit like NewTerminal (see below). Any object of type New_Term_Type becomes a distributed object and any reference to such an object becomes a fat pointer or a reference to a distributed object (see Term_Access declaration in Remote Access to Class Wide Types (RACW)).

with Types, Terminal; use Types, Terminal;
package NewTerminal is
   pragma Remote_Types;

   type New_Term_Type is
      new Term_Type with null record;

   procedure Notify
     (MyTerm   : access New_Term_Type;
      Payer    : in Customer_Type;
      Amount   : in Integer);

   function Current return Term_Access;
end NewTerminal;

In the code below, a client registers his name and his terminal with RACWBank. Therefore, when any payer transfers some money to him, RACWBank is able to notify the client of the transfer of funds.

with NewTerminal, RACWBank, Types; use NewTerminal, RACWBank, Types;
procedure Term1Client is
   MyTerm   : Term_Access   := Current;
   Customer : Customer_Type := "poor";
   Password : Password_Type := "yyyy";
begin
   Register (MyTerm, Customer, Password);
   --  [...] Execute other things
end Term1Client;

In the code below, a second client, the payer, registers his terminal to the bank and executes a transfer to the first client.

with NewTerminal, RACWBank, Types; use NewTerminal, RACWBank, Types;
procedure Term2Client is
   MyTerm   : Term_Access   := Current;
   Payer    : Customer_Type := "rich";
   Password : Password_Type := "xxxx";
   Payee    : Customer_Type := "poor";
begin
   Register (MyTerm, Payer, Password);
   Transfer (Payer, Password, 100, Payee);
end Term2Client;

In the code below, we describe the general design of Transfer. Classical operations of Withdraw and Deposit are performed. Then, RACWBank retrieves the terminal of the payee (if present) and invokes a dispatching operation by dereferencing a distributed object Term. The reference is examined at run-time, and the execution of this operation takes place on the partition on which the distributed object resides.

with Types; use Types;
package body RACWBank is
   procedure Register
     (MyTerm   : in Term_Access;
      Customer : in Customer_Type;
      Password : in Password_Type) is
   begin
      Insert_In_Local_Table (MyTerm, Customer);
   end Register;

   procedure Transfer
     (Payer    : in Customer_Type;
      Password : in Password_Type;
      Amount   : in Positive;
      Payee    : in Customer_Type)
   is
      --  Find Customer terminal.
      Term : Term_Access
        := Find_In_Local_Table (Payee);
   begin
      Withdraw (Payer, Amount);
      Deposit  (Payee, Amount);
      if Term /= null then
         --  Notify on Payee terminal.
         Notify (Term, Payer, Amount);
      end if;
   end Transfer;

   --  [...] Other services
end RACWBank;

8.1.5.3. Transmitting Dynamic Structure

with Ada.Streams; use Ada.Streams;
package StringArrayStream is
   pragma Remote_Types;

   type List is private;
   procedure Append (L : access List; O : in String);
   function  Delete (L : access List) return String;

private
   type String_Access is access String;

   type Node;
   type List is access Node;

   type Node is record
      Content : String_Access;
      Next    : List;
   end record;

   procedure Read
     (S : access Root_Stream_Type'Class;
      L : out List);
   procedure Write
     (S : access Root_Stream_Type'Class;
      L : in List);
   for List'Read use Read;
   for List'Write use Write;
end StringArrayStream;

Non-remote access types cannot be declared in the public part of a remote types unit. However, it is possible to define private non-remote access types as long as the user provides its marshalling procedures, that is to say the mechanism needed to place a value of the type into a communication stream. The code below describes how to transmit a linked structure.

The package declaration provides a type definition of single-linked lists of unbounded strings. An implementation of the marshalling operations could be the following:

package body StringArrayStream is
   procedure Read
     (S : access Root_Stream_Type'Class;
      L : out List) is
   begin
      if Boolean'Input (S) then
         L := new Node;
         L.Content := new String'(String'Input (S));
         List'Read (S, L.Next);
      else
         L := null;
      end if;
   end Read;

   procedure Write
     (S : access Root_Stream_Type'Class;
      L : in List) is
   begin
      if L = null then
         Boolean'Output (S, False);
      else
         Boolean'Output (S, True);
         String'Output (S, L.Content.all);
         List'Write (S, L.Next);
      end if;
   end Write;

   --  [...] Other services
end StringArrayStream;

8.1.5.4. Summary of Remote Types Units

Remote types units:

  • Support the definition of distributed objects
  • Allow dynamically bound remote calls (via remote access types)
  • Allow non-remote access types (with marshalling subprograms)
  • Cannot have a specification that depends on normal units

8.1.6. Pragma Shared_Passive

8.1.6.1. Overview of Pragma Shared_Passive

The entities declared in such a categorized library unit are intended to be mapped on a virtual shared address space (file, memory, database). When two partitions use such a library unit, they can communicate by reading or writing the same variable in the shared unit. This supports the conventional shared variables paradigm. Entryless protected objects can be declared in these units, to provide an atomic access to shared data, thus implementing a simple transaction mechanism. When the address space is a file or a database, the user can take advantage of the persistency features provided by these storage nodes.

8.1.6.2. Shared and Protected Objects

In the code below, we define two kinds of shared objects. External_Synchronization requires that the different partitions updating this data synchronize to avoid conflicting operations on shared objects. Internal_Synchronization provides a way to get an atomic operation on shared objects. Note that only entryless protected types are allowed in a shared passive unit; synchronization must be done with protected procedures.

package SharedObjects is
   pragma Shared_Passive;

   Max : Positive := 10;
   type Index_Type is range 1 .. Max;
   type Rate_Type is new Float;

   type Rates_Type is array (Index_Type) of Rate_Type;

   External_Synchronization : Rates_Type;

   protected Internal_Synchronization is
      procedure Set
        (Index : in Index_Type;
         Rate  : in Rate_Type);

      procedure Get
        (Index : in Index_Type;
         Rate  : out Rate_Type);
   private
      Rates : Rates_Type;
   end Internal_Synchronization;
end SharedObjects;

8.1.6.3. Summary of Pragma Shared_Passive

Shared passive units:

  • Allow direct access to data from different partitions
  • Provide support for shared (distributed) memory
  • Support memory protection by means of entryless protected objects
  • Prevent specification from depending on normal units

8.1.7. More About Categorization Pragmas

8.1.7.1. Variables and Non-Remote Access Types

In RT or RCI package declarations, variable declarations are forbidden, and non-remote access types are allowed as long as their marshalling subprograms are explicitly provided (see Transmitting Dynamic Structure).

8.1.7.2. RPC Failures

Calls are executed at most once: they are made exactly one time or they fail with an exception. When a communication error occurs, System.RPC.Communication_Error is raised.

8.1.7.3. Exceptions

Any exception raised in a remote method or subprogram call is propagated back to the caller. Exception semantics are preserved in the regular Ada way.

package Internal is
   Exc : exception;
end Internal;
package RemPkg2 is
   pragma Remote_Call_Interface;

   procedure Subprogram;
end RemPkg2;
package RemPkg1 is
   pragma Remote_Call_Interface;

   procedure Subprogram;
end RemPkg1;

Let us say that RemPkg2, Internal and RemExcMain packages are on the same partition Partition_1 and that RemPkg1 is on partition Partition_2.

with RemPkg1, Ada.Exceptions; use Ada.Exceptions;
package body RemPkg2 is
   procedure Subprogram is
   begin
      RemPkg1.Subprogram;
   exception when E : others =>
      Raise_Exception (Exception_Identity (E), Exception_Message (E));
   end Subprogram;
end RemPkg2;
with Internal, Ada.Exceptions; use Ada.Exceptions;
package body RemPkg1 is
   procedure Subprogram is
   begin
      Raise_Exception (Internal.Exc'Identity, "Message");
   end Subprogram;
end RemPkg1;
with Ada.Text_IO, Ada.Exceptions; use Ada.Text_IO, Ada.Exceptions;
with RemPkg2, Internal;
procedure RemExcMain is
begin
   RemPkg2.Subprogram;
exception when E : Internal.Exc =>
   Put_Line (Exception_Message (E)); -- Output "Message"
end RemExcMain;

When RemPkg1.Subprogram on Partition_1 raises Internal.Exc, this exception is propagated back to Partition_2. As Internal.Exc is not defined on Partition_2, it is not possible to catch this exception without an exception handler when others. When this exception is reraised in RemPkg1.Subprogram, it is propagated back to Partition_1. But this time, Internal.Exc is visible and can be handled as we would in a single-partition Ada program. Of course, the exception message is also preserved.

8.1.7.4. Pragma Asynchronous

By default, a remote call is blocking: the caller waits until the remote call is complete and the output stream is received. Just like a normal (nonremote) call, the caller does not proceed until the call returns. By contrast, a remote subprogram labeled with pragma Asynchronous allows statically and dynamically bound remote calls to it to be executed asynchronously. A call to an asynchronous procedure doesn’t wait for the completion of the remote call, and lets the caller continue its execution. The remote procedure must have only in parameters, and any exception raised during the execution of the remote procedure is lost.

When pragma Asynchronous applies to a regular subprogram with in parameters, any call to this subprogram will be executed asynchronously. The following declaration of AsynchronousRCI.Asynchronous gives an example.

package AsynchronousRCI is
   pragma Remote_Call_Interface;

   procedure Asynchronous (X : Integer);
   pragma Asynchronous (Asynchronous);

   procedure Synchronous  (X : Integer);

   type AsynchronousRAS is access procedure (X : Integer);
   pragma Asynchronous (AsynchronousRAS);
end AsynchronousRCI;
package AsynchronousRT is
   pragma Remote_Types;

   type Object is tagged limited private;

   type AsynchronousRACW is access all Object'Class;
   pragma Asynchronous (AsynchronousRACW);

   procedure Asynchronous (X : Object);
   procedure Synchronous  (X : in out Object);
   function Create return AsynchronousRACW;

private
   type Object is tagged limited null record;
end AsynchronousRT;

A pragma Asynchronous may apply to a remote access-to-subprogram (RAS) type. An asynchronous RAS can be both asynchronous and synchronous depending on the designated subprogram. For instance, in the code below, remote call (1) is asynchronous but remote call (2) is synchronous.

A pragma Asynchronous may apply to a RACW as well. In this case, the invocation of any method with in parameters is always performed asynchronously. Remote method invocation (3) is asynchronous but remote method invocation (4) is synchronous.

with AsynchronousRCI, AsynchronousRT;
use AsynchronousRCI, AsynchronousRT;
procedure AsynchronousMain is
   RAS  : AsynchronousRAS;
   RACW : AsynchronousRACW := Create;
begin
   --  Asynchronous Dynamically Bound Remote Call (1)
   RAS := AsynchronousRCI.Asynchronous'Access;
   RAS (0);  --  Abbrev for RAS.all (0)
   --  Synchronous Dynamically Bound Remote Call (2)
   RAS := AsynchronousRCI.Synchronous'Access;
   RAS (0);
   --  Asynchronous Dynamically Bound Remote Call (3)
   Asynchronous (RACW.all);
   --  Synchronous Dynamically Bound Remote Call (4)
   Synchronous (RACW.all);
end AsynchronousMain;

This feature supports the conventional message passing paradigm. The user must be aware that this paradigm, and asynchronous remote calls in particular, has several drawbacks:

  • It violates the normal semantics of calls; the caller proceeds without awaiting the return. The semantics are more similar to a ‘remote goto’ than a remote call
  • It prevents easy development and debugging in a non-distributed context
  • It can introduce race conditions

To illustrate the latter, let us take the following example:

package Node2 is
   pragma Remote_Call_Interface;

   procedure Send (X : Integer);
   pragma Asynchronous (Send);
end Node2;
package body Node2 is
   V : Integer := 0;
   procedure Send (X : Integer) is
   begin
      V := X;
   end Send;
end Node2;
package Node1 is
   pragma Remote_Call_Interface;

   procedure Send (X : Integer);
   pragma Asynchronous (Send);
end Node1;
with Node2;
package body Node1 is
   procedure Send (X : Integer) is
   begin
      Node2.Send (X);
   end Send;
end Node1;
with Node1, Node2;
procedure NonDeterministic is
begin
   Node1.Send (1);
   Node2.Send (2);
end NonDeterministic;

Let us say that Main is configured on Partition_0, Node1 on Partition_1 and Node2 on Partition_2. If Node1.Send and Node2.Send procedures were synchronous or if no latency was introduced during network communication, we would have the following RPC order: Main remotely calls Node1.Send which remotely calls Node2.Send which sets V to 1. Then, Main remotely calls Node2.Send and sets V to 2.

Now, let us assume that both Send procedures are asynchronous and that the connection between Partition_1 and Partition_2 is very slow. The following scenario can very well occur. Main remotely calls Node1.Send and is unblocked. Immediately after this call, Main remotely calls Node2.Send and sets V to 2. Once this is done, the remote call to Node1.Send completes on Partition_1 and it remotely calls Node2.Send which sets V to 1.

8.1.7.5. Pragma All_Calls_Remote

A pragma All_Calls_Remote in a RCI unit forces remote procedure calls to be routed through the communication subsystem even for a local call. This eases the debugging of an application in a non-distributed situation that is very close to the distributed one, because the communication subsystem (including marshalling and unmarshalling procedures) can be exercised on a single node.

In some circumstances, a non-distributed application can behave differently from an application distributed on only one partition. This can happen when both All_Calls_Remote and Asynchronous features are used at the same time (see Pragma Asynchronous for an example). Another circumstance occurs when the marshalling operations raise an exception. In the following example, when unit ACRRCI is a All_@-Calls_@-Remote package, the program raises Program_Error. When unit ACRRCI is no longer a All_Calls_Remote package, then the program completes silently.

with Ada.Streams; use Ada.Streams;
package ACRRT is
   pragma Remote_Types;
   type T is private;
private
   type T is new Integer;
   procedure Read
     (S : access Root_Stream_Type'Class;
      X : out T);
   procedure Write
     (S : access Root_Stream_Type'Class;
      X : in T);
   for T'Read  use Read;
   for T'Write use Write;
end ACRRT;
package body ACRRT is
   procedure Read
     (S : access Root_Stream_Type'Class;
      X : out T) is
   begin
      raise Program_Error;
   end Read;

   procedure Write
     (S : access Root_Stream_Type'Class;
      X : in T) is
   begin
      raise Program_Error;
   end Write;
end ACRRT;
with ACRRT; use ACRRT;
package ACRRCI is
   pragma Remote_Call_Interface;
   pragma All_Calls_Remote;

   procedure P (X : T);
end ACRRCI;
package body ACRRCI is
   procedure P (X : T) is
   begin
      null;
   end P;
end ACRRCI;
with ACRRCI, ACRRT;
procedure ACRMain is
   X : ACRRT.T;
begin
   ACRRCI.P (X);
end ACRMain;

8.1.7.6. Generic Categorized Units

generic
package GenericRCI is
   pragma Remote_Call_Interface;

   procedure P;
end GenericRCI;
with GenericRCI;
package RCIInstantiation is new GenericRCI;
pragma Remote_Call_Interface (RCIInstantiation);
with GenericRCI;
package NormalInstantiation is new GenericRCI;

Generic units may be categorized. Instances do not automatically inherit the categorization of their generic units, but they can be categorized explicitly. If they are not, instances are normal compilation units. Like any other categorized unit, a categorized instance must be at the library level, and the restrictions of categorized units apply on instantiation (in particular on generic formal parameters).

8.1.7.7. Categorization Unit Dependencies

Each categorization pragma has very specific visibility rules. As a general rule, RCI > RT > SP > Pure, where the comparison indicates allowed semantic dependencies. This means that a Remote_Types package can make visible in its specification only Remote_Types, Shared_Passive and Pure units.

8.2. Partition Communication Subsystem

8.2.1. Marshalling and Unmarshalling Operations

The Partition Communication Subsystem (PCS) is the runtime library for distributed features. It marshals and unmarshals client and server requests into a data stream suitable for network transmission.

Parameter streams are normally read and written using four attributes:

  • Write: write an element into a stream, valid only for constrained types
  • Read: read a constrained element from a stream
  • Output: same as Write, but write discriminants or array bounds as well if needed
  • Input: same as Read, but read discriminants or bounds from the stream (the Input attribute denotes a function)

An Ada compiler provides default ‘Read and ‘Write operations. But it is up to the implementation of the PCS to provide default ‘Read and ‘Write to ensure proper operation between heterogeneous architectures (see Heterogeneous System).

The user can override these operations, except for predefined types. Overriding with a custom version provides the user with a way to debug its application (even outside of the Distributed Systems Annex). On the other hand, remaining with the default implementation allows the user to take advantage of optimized and portable representations provided by the PCS.

with Ada.Streams; use Ada.Streams;
package New_Integers is
   pragma Pure;

   type New_Integer is new Integer;

   procedure Read
     (S : access Root_Stream_Type'Class;
      V : out New_Integer);
   procedure Write
     (S : access Root_Stream_Type'Class;
      V : in New_Integer);

   for New_Integer'Read  use Read;
   for New_Integer'Write use Write;
end New_Integers;
package body New_Integers is
   procedure Read
     (S : access Root_Stream_Type'Class;
      V : out New_Integer)
   is
      B : String := String'Input (S);
   begin
      V := New_Integer'Value (B);
   end Read;

   procedure Write
     (S : access Root_Stream_Type'Class;
      V : in New_Integer)
   is
   begin
      String'Output (S, New_Integer'Image (V));
   end Write;
end New_Integers;

The language forces the user to provide Read and Write operations for non-remote access types. Transmitting an access value by dumping its content into a stream makes no sense when the value is going to be transmitted to another partition (with a different memory space). To transmit non-remote access types see Transmitting Dynamic Structure.

8.2.2. Incorrect Remote Dispatching

When a remote subprogram takes a class wide argument, there is a risk of using an object of a derived type that will not be clean enough to be transmitted. For example, given a type called Root_Type, if a remote procedure takes a Root_Type’Class as an argument, the user can call it with an instance of Derived_Type that is Root_Type enriched with a field of a task type. This will lead to a non-communicable type to be transmitted between partitions.

To prevent this, paragraph E.4(18) of the Ada Reference Manual explains that any actual type used as parameter for a remote call whose formal type is a class wide type must be declared in the visible part of a Pure or Remote_Types package. This property also holds for remote functions returning class wide types. To summarize, the actual type used should have been eligible for being declared where the root type has been declared. If a `bad’ object is given to a remote subprogram, Program_Error will be raised at the point of the call.

8.2.3. Partition Ids

U’Partition_ID identifies the partition where the unit U has been elaborated. For this purpose, the PCS provides an integer type Partition_ID to uniquely designate a partition. Note that a Partition_ID is represented as a universal integer, and has no meaning outside of the PCS. The RM requires that two partitions of a distributed program have different Partition_ID’s at a given time. A Partition_ID may or may not be assigned statically (at compile or link time). A Partition_ID may or may not be related to the physical location of the partition.

Partition_ID’s can be used to check whether a RCI package is configured locally.

with RCI;
with Ada.Text_IO;
procedure Check_PID is
begin
   if RCI'Partition_ID = Check_PID'Partition_ID then
      Ada.Text_IO.Put_Line ("package RCI is configured locally");
   else
      Ada.Text_IO.Put_Line ("package RCI is configured remotely");
   end if;
end Check_PID;

8.2.4. Concurrent Remote Calls

It is not defined by the PCS specification whether one or more threads of control should be available to process incoming messages and to wait for their completion. But the PCS implementation is required to be reentrant, thereby allowing concurrent calls on it to service concurrent remote subprogram calls into the server partition. This means that at the implementation level the PCS manages a pool of helper tasks. This (apart from performance) is invisible to the user.

8.2.5. Consistency and Elaboration

A library unit is consistent if the same version of its declaration is used in all units that reference it. This requirement applies as well to a unit that is referenced in several partitions of a distributed program. If a shared passive or RCI library unit U is included in some partition P, It is a bounded error to elaborate another partition P1 of a distributed program that that depends on a different version of U. As a result of this error, Program_Error can be raised in one or both partitions during elaboration.

U’Version yields a string that identifies the version of the unit declaration and any unit declaration on which it depends. U’Version_Body yields a string that identifies the version of the unit body. These attributes are used by the PCS to verify the consistency of an application.

After elaborating the library units, but prior to invoking the main subprogram, the PCS checks the RCI unit versions, and then accept any incoming RPC. To guarantee that it is safe to call receiving stubs, any incoming RPC is kept pending until the partition completes its elaboration.

8.2.6. Abortion and Termination

If a construct containing a remote call is aborted, the remote subprogram call is cancelled. Whether the execution of the remote subprogram is immediately aborted as a result of the cancellation is implementation defined.

An active partition terminates when its environment task terminates. In other terms, a partition cannot terminate before the Ada program itself terminates. The standard termination mechanism applies, but can be extended with extra rules (see Partition Attribute Termination for examples).

8.3. Most Features in One Example

The example shown on the following figure highlights most of the features of DSA. The system is based on a set of factories and workers and a storage. Each entity is a partition itself. A factory hires a worker from a pool of workers (hire - 1) and assigns a job (query - 2) to him. The worker performs the job and saves the result (reply - 3) in a storage common to all the factories. The worker notifies the factory of the end of his job (notify - 4).

When a worker has completed his job, the result must be saved in a common storage. To do this, we define a protected area in SP package Storage (see following code). An entryless protected object ensures atomic access to this area.

package Storage is
   pragma Shared_Passive;

   protected Queue is
      procedure Insert (Q, R : Integer);
      procedure Remove
        (Q : in Integer;
         R : out Integer);
   private
      --  Other declarations
   end Queue;
end Storage;

Common is a Remote_Types package that defines most of the remote services of the above system (see following code). First, we define a way for the workers to signal the completion of his job. This callback mechanism is implemented using RAS Notify.

with Storage; use Storage;
package Common is
   pragma Remote_Types;

   type Notify is
      access procedure (Q : Integer);
   pragma Asynchronous (Notify);

   type Worker is
      abstract tagged limited private;
   procedure Assign
     (W : access Worker;
      Q : in Integer;
      N : in Notify) is abstract;

   type Any_Worker is
      access all Worker'Class;
   pragma Asynchronous (Any_Worker);

private
   type Worker is abstract tagged limited null record;
end Common;

We define an abstract tagged type Worker which is intended to be the root type of the whole distributed objects hierarchy. Assign allows a factory to specify a job to a worker and a way for the worker to signal its employer the completion of this job. Any_Worker is a remote access to class wide type (RACW). In other words, it is a reference to a distributed object of any derived type from Worker class. Note that the two remote access types (Any_Worker and Notify) are declared as asynchronous. Therefore, any override of Assign will be executed asynchronously. To be asynchronous, an object of type Notify has to be a reference to an asynchronous procedure.

NewWorker is derived from type Worker and Assign is overridden.

with Common, Storage; use Common, Storage;
package NewWorkers is
   pragma Remote_Types;

   type NewWorker is new Worker with private;

   procedure Assign
     (W : access NewWorker;
      Q : Integer;
      N : Notify);
private
   type NewWorker is new Worker with record
      NewField : Field_Type; --  [...] Other fields
   end record;
end NewWorkers;

The following code shows how to derive a second generation of workers NewNewWorker from the first generation NewWorker. As mentioned above, this RT package can be duplicated on several partitions to produce several types of workers and also several remote workers.

with Common, Storage, NewWorkers; use Common, Storage, NewWorkers;
package NewNewWorkers is
   pragma Remote_Types;

   type NewNewWorker is new NewWorker with private;

   procedure Assign
     (W : access NewNewWorker;
      Q : Integer;
      N : Notify);
private
   type NewNewWorker is new NewWorker with record
      NewField : Field_Type; --  [...] Other fields
   end record;
end NewNewWorkers;

In the following code, we define a unique place where workers wait for jobs. WorkerCity is a Remote_Call_Interface package with services to hire and free workers. Unlike Remote_Types packages, Remote_Call_Interface packages cannot be duplicated, and are assigned to one specific partition.

with Common; use Common;
package WorkerCity is
   pragma Remote_Call_Interface;

   procedure Insert (W : in  Any_Worker);
   procedure Remove (W : out Any_Worker);
end WorkerCity;

In order to use even more DSA features, Factory is defined as a generic RCI package (see sample above). Any instantiation defines a new factory (see sample above). To be RCI, this instantiation has to be categorized once again.

with Storage; use Storage;
generic
package Factory is
   pragma Remote_Call_Interface;

   procedure Notify (Q : Integer);
   pragma Asynchronous (Notify);
end Factory;
with Factory;
package NewFactory is new Factory;
pragma Remote_Call_Interface (NewFactory);

8.4. A small example of a DSA application

In this section we will write a very simple client-server application using PolyORB DSA. The server will provide a Remote Call Interface composed of a single Echo_String function that will take a String and return it to the caller.

Here is the code for the server:

server.ads: .. literalinclude:: ../examples/dsa/echo/server.ads

language:ada

server.adb: .. literalinclude:: ../examples/dsa/echo/server.adb

language:ada

And here is the code for the client:

client.adb: .. literalinclude:: ../examples/dsa/echo/client.adb

language:ada

For more details about the Distributed Systems Annex, see the Ada Reference Manual :cite:`ada-rm`.

8.5. Building a DSA application with PolyORB

This section describes how to build a complete distributed Ada application using the PolyORB implementation of the DSA.

8.5.1. Introduction to PolyORB/DSA

A distributed Ada application comprises a number of partitions which can be executed concurrently on the same machine or, and this is the interesting part, can be distributed on a network of machines. The way in which partitions communicate is described in Annex E of the Ada Reference Manual.

A partition is a set of compilation units that are linked together to produce an executable binary. A distributed program comprises two or more communicating partitions.

The Distributed Systems Annex (DSA) does not describe how a distributed application should be configured. It is up to the user to define what are the partitions in his program and on which machines they should be executed.

The tool po_gnatdist and its configuration language allows the user to partition his program and to specify the machines on which the individual partitions are to execute.

po_gnatdist reads a configuration file (whose syntax is described in section The Configuration Language) and builds several executables, one for each partition. It also takes care of launching the different partitions (default) with parameters that can be specific to each partition.

8.5.2. How to Configure a Distributed Application

  • Write a non-distributed Ada application, to get familiar with the PolyORB environment. Use the categorization pragmas to specify the packages that can be called remotely.
  • When this non-distributed application is working, write a configuration file that maps the user categorized packages onto specific partitions. This concerns particularly remote call interface and remote types packages. Specify the main procedure of the distributed application (see Partition Attribute Main).
  • Type `po_gnatdist <configuration-file>‘.
  • Start the distributed application by invoking the start-up shell script or default Ada program (depending on the Starter option, see Pragma Starter).

8.5.3. Gnatdist Command Line Options

po_gnatdist [switches] configuration-file [list-of-partitions]

The switches of po_gnatdist are, for the time being, exactly the same as those of gnatmake, with the addition of –PCS, which allows the user to override the default selection of distribution runtime library (PCS). By default po_gnatdist outputs a configuration report and the actions performed. The switch -n allows po_gnatdist to skip the first stage of recompilation of the non-distributed application. Switch -r requests a relocatable starter (see Pragma Starter).

The names of all configuration files must have the suffix .cfg. There may be several configuration files for the same distributed application, as the user may want to use different distributed configurations depending on load and other characteristics of the computing environment.

If a list of partitions is provided on the command line of the po_gnatdist command, only these partitions will be built. In the following configuration example, the user can type :

po_gnatdist *<configuration> <partition_2> <partition_3>*

8.5.4. The Configuration Language

The configuration language is Ada-like. As the capabilities of PolyORB will evolve, so will this configuration language. Most of the attributes and pragmas can be overridden at run-time by command line arguments or environment variables.

8.5.4.1. Language Keywords

All the Ada keywords are reserved keywords of the configuration language. po_gnatdist generates full Ada code in order to build the different executables. To avoid naming conflicts between Ada and the configuration language, all the Ada keywords have been reserved even if they are not used in the configuration language.

In addition, the following keywords are defined:

  • configuration to encapsulate a configuration
  • partition that is a predefined type to declare partitions

8.5.4.2. Pragmas and Representation Clauses

It is possible to modify the default behavior of the configuration via a pragma definition.

PRAGMA ::=
   **pragma** PRAGMA_NAME [(PRAGMA_ARGUMENTS)];

It is also possible to modify the default behavior of all the partitions via an attribute definition clause applied to the predefined type Partition.

REPRESENTATION_CLAUSE ::=
   **for** Partition'ATTRIBUTE_NAME **use** ATTRIBUTE_ARGUMENTS;

It is also possible to modify the default behavior of a given partition via an attribute definition clause applied to the partition itself.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'ATTRIBUTE_NAME **use** ATTRIBUTE_ARGUMENTS;

When an attribute definition clause is applied to a given object of a predefined type, this overrides any attribute definition of the predefined type. In the next sections, attributes apply to a given object rather than to the predefined type.

8.5.4.3. Configuration Declaration

The distribution of one or several Ada programs is described by a single configuration unit. This configuration unit has a specification part and an optional body part. A configuration unit is declared as an Ada procedure would be. The keyword configuration is reserved for this purpose.

CONFIGURATION_UNIT ::=
   **configuration** IDENTIFIER **is**
      DECLARATIVE_PART
   [**begin**
      SEQUENCE_OF_STATEMENTS]
   **end** [IDENTIFIER];

8.5.4.4. Partition Declaration

In the declarative part, the user declares his partitions and can change their default behavior. po_gnatdist provides a predefined type Partition. The user can declare a list of partitions and can also initialize these partitions with an initial list of Ada units.

DECLARATIVE_PART ::= {DECLARATIVE_ITEM}

DECLARATIVE_ITEM ::=
   PARTITION_DECLARATION
 | REPRESENTATION_CLAUSE
 | SUBPROGRAM_DECLARATION
 | PRAGMA

SUBPROGRAM_DECLARATION ::=
   MAIN_PROCEDURE_DECLARATION
 | PROCEDURE_DECLARATION
 | FUNCTION_DECLARATION

PARTITION_DECLARATION ::=
   DEFINING_IDENTIFIER_LIST : Partition
      [:= ENUMERATION_OF_ADA_UNITS];

DEFINING_IDENTIFIER_LIST ::=
   DEFINING_IDENTIFIER {, DEFINING_IDENTIFIER}

STATEMENT ::=
   IDENTIFIER := ENUMERATION_OF_ADA_UNITS;

SEQUENCE_OF_STATEMENTS ::=
   STATEMENT {STATEMENT}

Once declared, a partition is an empty list of Ada units. The operator ”:=” adds the Ada units list on the right side to the current list of Ada units that are already mapped to the partition. This is a non-destructive operation. Whether a unit is a relevant Ada unit or not is checked later on by the back-end of po_gnatdist. These assignments can occur in the declarative part as well as in the body part.

ENUMERATION_OF_ADA_UNITS ::= ({ADA_UNIT {, ADA_UNIT}});

8.5.4.5. Location Declaration

There are several kinds of location in the configuration language. We shall present them in the next subsections, but here is a short overview of these locations:

  • Boot_Location defines the network locations to use to communicate with the the boot server during the boot phase
  • Self_Location defines the network locations to use by others to communicate with the current partition
  • Data_Location defines the data storage location used by the current partition to map its shared passive units

A location is composed of a support name and a specific data for this support. For instance, a network location is composed of a protocol name like tcp and a protocol data like <machine>:<port>. A storage location is composed of a storage support name like dfs (for Distributed File System) and a storage support data like a directory /dfs/glade.

LOCATION      ::= ([Support_Name =>] STRING_LITERAL,
                   [Support_Data =>] STRING_LITERAL)

LOCATION_LIST ::= (LOCATION [,LOCATION)])

Note that a location may have an undefined or incomplete support data. In this case, the support is free to compute a support data. For instance, (“tcp”, “”) specifies that the protocol is used but that the protocol data <machine>:<port> is to be determined by the protocol itself.

A location or a list of locations can be can be concatenated into a single string to be used as a command line option or an environment variable (see Partition Runtime Parameters).

If a partition wants to communicate with another partition once the location list of the latter is known, the caller will use the first location of the callee whose protocol is locally available. For instance, if a callee exports three locations (“N1”, “D1”), (“N2”, “D2”) and (“N3”, “D3”), a caller with protocols N2 and N3 locally available will try to communicate with the callee using the protocol of name N2 and of specific data D2.

8.5.4.6. Partition Attribute Main

Basically, the distributed system annex (DSA) helps the user in building a distributed application from a non-distributed application (Of course, this is not the only possible model offered by DSA). The user can design, implement and test his application in a non-distributed environment, and then should be able to switch from the non-distributed case to a distributed case. As mentioned before, this two-phase design approach has several advantages.

In a non-distributed case, the user executes only one main executable possibly with a name corresponding to the main unit name of his application. With po_gnatdist, in a distributed case, a main executable with a name corresponding to the main unit name is responsible for starting the entire distributed application. Therefore, the user can start his application the same way he used to do in the non-distributed case.

For this reason, the configuration language provides a way to declare the main procedure of the non-distributed application.

MAIN_PROCEDURE_IDENTIFIER ::=
  ADA_UNIT
MAIN_PROCEDURE_DECLARATION ::=
   **procedure** MAIN_PROCEDURE_IDENTIFIER **is in** PARTITION_IDENTIFIER;

In this case, the partition in which the main procedure has been mapped is called the main partition. It includes in its code a call to this main procedure. The main partition has an additional specific role, because the boot server is located on it (see PolyORB PCS Internals).

The main procedures for the other partitions have a null body. However, the user can also modify this behavior by providing an alternate main procedure. To do this, an alternate main subprogram has to be declared and assigned to the partition Main attribute.

PROCEDURE_DECLARATION ::=
   **procedure** PROCEDURE_IDENTIFIER;

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Main **use** PROCEDURE_IDENTIFIER;

8.5.4.7. Pragma Starter

By default, the executable for a distributed application is an Ada starter procedure which will launch all other partitions. The host for each partition will be interactively obtained from the user at run time if not statically specified (see Partition Attribute Host).

Pragma Starter allows an alternate starter to be requested.

CONVENTION_LITERAL ::= Ada   |
                       Shell |
                       None

PRAGMA ::=
   **pragma** Starter ([Convention =>] CONVENTION_LITERAL);
  • The default method consists in launching partitions from the main partition Ada subprogram using a remote shell (see below).
  • The user may ask for a Shell script that starts the different partitions one at a time on the appropriate remote machines, using a remote shell. As the Ada starter, the Shell script starter ask for partition hosts interactively when a partition host is not already defined. Having a textual shell script allows the user to edit it and to modify it easily.
  • The user may ask for a None starter. In this case, it is up to the user to launch the different partitions.
  • By default, the absolute path to each partition executable is determined at build time and embedded in the starter. However, if gnatdist command line switch -r is used, a relocatable starter is generated. For a relocatable starter, if the Executable_Dir for a partition is a relative path (or left unspecified), then it will be resolved at run time relative to the location of the starter. This allows the user to move the starter and partition executables around after build.

8.5.4.8. Pragma Remote_Shell

When pragma Starter is Ada or Shell, the main partition launches the other partitions. The remote shell used as a default is determined during PolyORB configuration and installation. It is either rsh, remsh or the argument passed to –with-rshcmd=[ARG]. The pragma Remote_Shell allows the user to override the default.

PRAGMA ::=
   **pragma** Remote_Shell
     ([Command =>] STRING_LITERAL,
      [Options =>] STRING_LITERAL);

The Command parameter indicates the name of the remote shell command name and the Options parameter corresponds to the additional flags to pass to the remote shell command.

8.5.4.9. Pragma Name_Server

NAME_SERVER_LITERAL ::= Embedded   |
                        Standalone |
                        None

PRAGMA ::=
   **pragma** Name_Server ([Name_Server_Kind =>] NAME_SERVER_LITERAL);

By default, partitions in a PolyORB/DSA application rely on an external, stand-alone name server launched by the user, and whose location is retrieved from runtime configuration.

A pragma Name_Server with parameter Embedded can be used to request the PCS to instead set up a name server within the main partition. If the Ada starter is used, the location of the name server is passed automatically to slave partitions.

A pragma Name_Server with parameter None specifies that no name server is present in the application. In this case the location of each partition must be specified in the po_gnatdist configuration file, or in PolyORB run-time configuration.

8.5.4.10. Pragma Boot_Location

When a partition starts executing, one of the first steps consists in a connection to the boot server. This pragma provides one or more locations in order to get a connection with the boot server.

PRAGMA ::=
   PRAGMA_WITH_NAME_AND_DATA
 | PRAGMA_WITH_LOCATION
 | PRAGMA_WITH_LOCATION_LIST

PRAGMA_WITH_NAME_AND_DATA ::=
   **pragma** Boot_Location
     ([Protocol_Name =>] STRING_LITERAL,
      [Protocol_Data =>] STRING_LITERAL);

PRAGMA_WITH_LOCATION ::=
   **pragma** Boot_Location ([Location =>] LOCATION);

PRAGMA_WITH_LOCATION_LIST ::=
   **pragma** Boot_Location ([Locations =>] LOCATION_LIST);

This boot server location can be concatenated into a single string to be used as a command line option or an environment variable (see Partition Runtime Parameters).

**Note: pragma Boot_Server is now obsolete. It is recommended to use pragma Boot_Location. This wording is more consistent with the rest of the configuration language (see Self_Location Partition_Option_self_location**_and_Data_Location_@ref{Partition_Option_data_location).}

8.5.4.11. Partition Attribute Self_Location

Except for the boot partition on which the boot server is located, a partition is reachable through a dynamically computed location (for instance, the partition looks for a free port when the protocol is tcp). The user may want such a partition to be reachable from a given fixed location defined in configuration.

This is achieved by setting the Self_Location attribute for the partition. In particular a location must be defined for the main partition, and each partition on which an RCI is assigned, if no name server is used.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Self_Location **use** LOCATION;
 | **for** PARTITION_IDENTIFIER'Self_Location **use** LOCATION_LIST;

If the attribute definition clause applies to the predefined type Partition, the locations have to be incomplete. Otherwise, all the partitions would be reachable through the same locations, which is definitively not recommended.

When an attribute self_location definition clause applies to a given partition, the protocol units needed for this partition are linked in the executable. By default, when the self_location attribute is not redefined, the default protocol used by the partition and loaded in its executable is the tcp protocol.

8.5.4.12. Partition Attribute Passive

By default, a partition is an active partition. This attribute allows to define a passive partition. In this case, po_gnatdist checks that only shared passive units are mapped on the partition. As this partition cannot register itself, its location is hard-coded in all the partitions that depend on its shared passive units.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Passive **use** BOOLEAN_LITERAL;

8.5.4.13. Partition Attribute Data_Location

Shared passive units can be mapped on passive or active partitions. In both cases, it is possible to choose the data storage support and to configure it with the specific data of a location.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Data_Location **use** LOCATION;
 | **for** PARTITION_IDENTIFIER'Data_Location **use** LOCATION_LIST;

When an attribute data_location definition clause applies to a given partition, the data storage support units needed for this partition are linked in the executable. By default, when the data_location attribute is not redefined, the default storage support used by the partition and loaded in its executable is the dfs support. dfs, Distributed File System, is a storage support available as soon as files can be shared between partitions.

It is not possible to map the different shared passive units of a given partition on different data storage locations. PolyORB requires all the shared passive units of a given partition to be mapped on the same storage support. When the attribute data_location applied to a partition is a list of locations, all the storage support units needed for this partition are linked in the executable. By default, only the first one is activated. The user can choose to change the activated support by another one specified in the location list. This can be done using the partition option data_location (see Partition_Option_data_location).

As passive partitions cannot be activated, it is not possible to provide a location list as a data_location attribute. It is not possible to change dynamically its location either.

8.5.4.14. Partition Attribute Allow_Light_PCS

On some circumstances, po_gnatdist can detect that a partition does not need the full PCS functionalities. This occurs in particular when the partition does use any task, any RCI unit or any RACW object. Therefore, the partition does not receive any message that is not a reply to a previous request. In this case, the PCS does not drag in the tasking library and a light PCS is linked in the partition executable. This specific configuration is automatically determined by po_gnatdist with the ALI file information.

This optimization can be inappropriate especially when the user wants to use the “Distributed Shared Memory” storage support which runs Li and Hudak’s algorithm. In this case, messages are exchanged without being replies to previously sent requests and the normal PCS should be linked instead of the light one. Note also that po_gnatdist cannot know for sure that the DSM storage support assigned at configuration time is used at run-time. The user can configure this optimization with the following attribute.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Allow_Light_PCS **use** BOOLEAN_LITERAL;

8.5.4.15. Pragma Priority

It might be necessary for real-time applications to get control over the priority at which a remote procedure call is executed. By default, the PCS sends the priority of the client to the server which sets the priority of an anonymous task to this value. The pragma Priority allows to decide which priority policy should apply in the distributed application.

PRIORITY_POLICY_LITERAL ::= Server_Declared
                          | Client_Propagated

PRAGMA ::=
   **pragma** Priority ([Policy =>] PRIORITY_POLICY_LITERAL);
  • The default policy Client_Propagated consists in propagating the client priority to the server.
  • The policy Server_Declared consists in executing the remote procedure call at a priority specific to the partition. This priority can be set using the partition attribute Priority.

8.5.4.16. Partition Attribute Priority

This attribute allows to set the priority at which level a remote procedure call is executed on a server when the priority policy is Server_Declared. By default, the default priority of the anonymous task is the default task priority.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Priority **use** INTEGER_LITERAL;

8.5.4.17. Partition Attribute Host

Logical nodes (or partitions) can be mapped onto physical nodes. The host-name can be either a static or dynamic value. In case of a static value, the expression is a string literal. In case of a dynamic value, the representation clause argument is a function that accepts a string as parameter and that returns a string value. When the function is called, the partition name is passed as parameter and the host-name is returned.

FUNCTION_DECLARATION ::=
   **function** FUNCTION_IDENTIFIER
     (PARAMETER_IDENTIFIER : [**in**] String)
      **return** String;

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Host **use** STRING_LITERAL;
 | **for** PARTITION_IDENTIFIER'Host **use** FUNCTION_IDENTIFIER;

The signature of the function must be the following : it takes a string parameter which corresponds to a partition name. It returns a string parameter which corresponds to the host-name. The function that returns the host-name can be an Ada function (default) or a shell script. A pragma Import is used to import a function defined in Ada or in Shell (see Pragma Import).

This function is called on the main partition by the PCS to launch a given partition on a given logical node. In case of load balancing, the function can return the most appropriate among a set of hosts.

8.5.4.18. Pragma Import

Two kinds of subprograms are allowed in the configuration language. A main procedure is used as a partition Main attribute and a function is used as a partition Host attribute.

PROCEDURE_DECLARATION ::=
     **procedure** PROCEDURE_IDENTIFIER;
FUNCTION_DECLARATION ::=
     **function** FUNCTION_IDENTIFIER
        (PARAMETER_IDENTIFIER : [**in**] String)
         **return** String;

The function can be an Ada function (default) or a shell script. To import a shell script, the pragma Import must be used:

PRAGMA ::=
   **pragma** Import
      ([Entity        =>] FUNCTION_IDENTIFIER,
       [Convention    =>] CONVENTION_LITERAL,
       [External_Name =>] STRING_LITERAL);

**pragma** Import (Best_Node, Shell, "best-node");

In this case, the PCS invokes the shell script with the partition name as a command line argument. The shell script is supposed to return the partition host-name (see Partition Attribute Host).

8.5.4.19. Partition Attribute Directory

Directory allows the user to specify in which directory the partition executable is stored. This can be useful in heterogeneous systems when the user wants to store executables for the same target in a given directory. Specifying the directory is also useful if the partition executable is not directly visible from the user environment. For instance, when a remote command like rsh is invoked, the executable directory has to be present in the user path. If the Directory attribute has been specified, the executable full name is used.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Directory **use** STRING_LITERAL;

8.5.4.20. Partition Attribute Command_Line

The user may want to pass arguments on the command line of a partition. However, when a partition is launched automatically by the main partition, the partition command line includes only PolyORB arguments. To add arguments on the command line, the user can take advantage of the following attribute.

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Command_Line **use** STRING_LITERAL;

8.5.4.21. Partition Attribute Environment_Variables

The attribute Environment_Variables allows the user to specify a list of environment variables that should be passed from the main partition to slave partitions when using a generated (shell or Ada) launcher.

This attribute can be applied to all partitions by defining it for the predefined type Partition, or to a specific partition. Note that in the latter case, the list does not replace the default one but instead complements it (i.e. variables specified for Partition are passed in addition to the partition specific ones).

Use of this features requires that remote nodes provide the POSIX env(1) command.

STRING_LITERAL_LIST ::=
   STRING_LITERAL
   | STRING_LITERAL**,** STRING_LITERAL_LIST

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Environment_Variables **use (**STRING_LITERAL_LIST**);**

8.5.4.22. Partition Attribute Termination

The Ada Reference Manual does not provide any specific rule to handle global termination of a distributed application (see Abortion and Termination).

In PolyORB/DSA, by default, a set of partitions terminates when each partition can terminate and when no message remains to be delivered. A distributed algorithm that checks for this global condition is activated periodically by the main boot server.

TERMINATION_LITERAL ::= Global_Termination |
                        Local_Termination  |
                        Deferred_Termination

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Termination **use** TERMINATION_LITERAL;
  • When a partition is configured with the global termination policy, it terminates as soon as the main boot server sends a signal to do so. The main boot server checks periodically whether the application can terminate. When all partitions are ready to terminate, the main boot server sends to each partition a termination request. The global termination policy is the default policy.
  • The deferred termination policy is very similar to the global termination. The only difference is that when a partition with a deferred termination policy receives a termination request, it just ignores it. This policy allows a partition to run forever without preventing a set of partitions from terminating.
  • When a partition is configured with the local termination policy, it terminates as soon as the classical Ada termination is detected by the partition. It means that this partition does not wait for the termination request of the main boot server.

8.5.4.23. Partition Attribute Reconnection

When no RCI package is configured on a partition, such a partition can be launched several times without any problem. When one or more RCI packages are configured on a partition, such a partition cannot be launched more than once. If this partition were to be launched repeatedly, it would not be possible to decide which partition instance should execute a remote procedure call.

When a partition crashes or is stopped, one may want to restart this partition and possibly restore its state - with Shared_Passive packages, for instance. In such a situation, the partition is already known to other partitions and possibly marked as a dead partition. Several policies can be selected:

RECONNECTION_LITERAL ::= Reject_On_Restart  |
                         Fail_Until_Restart |
                         Block_Until_Restart

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Reconnection **use** RECONNECTION_LITERAL;
  • When this partition is configured with the Reject_On_Restart reconnection policy, the dead partition is kept dead and any attempt to restart it fails. Any remote call to a subprogram located on this partition results in a Communication_Error exception. The Reject_On_Restart policy is the default policy.
  • When this partition is configured with the Fail_Until_Restart reconnection policy, the dead partition can be restarted. Any remote call to a subprogram located on this partition results in an exception Communication_Error as long as this partition has not been restarted. As soon as the partition is restarted, remote calls to this partition are executed normally.
  • When this partition is configured with the Block_Until_Restart reconnection policy, the dead partition partition can be restarted. Any remote call to a subprogram located on this partition is suspended until the partition is restarted. As soon as the partition is restarted, remote calls to this partition are executed normally. The suspended remote procedure calls to this partition are resumed.

8.5.4.24. Pragma Version

A library unit is consistent if the same version of its declaration is used throughout (see Consistency and Elaboration). It can be useful to deactivate these checks, especially when the user wants to be able to update a server without updating a client.

PRAGMA ::=
   **pragma** Version ([Check =>] BOOLEAN_LITERAL);

8.5.4.25. Partition Attribute Task_Pool

When multiple remote subprogram calls occur on the same partition, they are handled by several anonymous tasks. These tasks can be allocated dynamically or re-used from a pool of (preallocated) tasks. When a remote subprogram call is completed, the anonymous task can be deallocated or queued in a pool in order to be re-used for further remote subprogram calls. The number of tasks in the anonymous tasks pool can be configured by means of three independent parameters.

  • The task pool minimum size indicates the number of anonymous tasks preallocated and always available in the PCS. Preallocating anonymous tasks can be useful in real-time systems to prevent task dynamic allocation.
  • The task pool high size is a ceiling. When a remote subprogram call is completed, its anonymous task is deallocated if the number of tasks already in the pool is greater than the ceiling. If not, then the task is queued in the pool.
  • The task pool maximum size indicates the maximum number of anonymous tasks in the PCS. In other words, it provides a way to limit the number of remote calls in the PCS. When a RPC request is received, if the number of active remote calls is greater than the task pool maximum size, then the request is kept pending until an anonymous task completes its own remote call and becomes available.
REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'Task_Pool **use** TASK_POOL_SIZE_ARRAY;

TASK_POOL_SIZE_ARRAY ::=
  (NATURAL_LITERAL,  *--  Task Pool Minimum Size*
   NATURAL_LITERAL,  *--  Task Pool High Size*
   NATURAL_LITERAL); *--  Task Pool Maximum Size*

In order to have only one active remote call at a time, the task pool configuration is declared as follows:

**for** Partition'Task_Pool **use** (0, 0, 1);

8.5.4.26. Partition Attribute ORB_Tasking_Policy

By default, the Thread_Pool ORB tasking policy is used for all partitions. This attribute allows selection of an alternate policy among those provided by PolyORB (see PolyORB ORB Tasking policies) for each partition.

ORB_TASKING_POLICY_LITERAL ::= Thread_Pool        |
                               Thread_Per_Session |
                               Thread_Per_Request

REPRESENTATION_CLAUSE ::=
   **for** PARTITION_IDENTIFIER'ORB_Tasking_Policy **use** ORB_TASKING_POLICY_LITERAL;

Note: @ref{Partition Attribute Task_Pool has no effect when another policy than Thread_Pool is activated.}

8.5.4.27. A Complete Example

Almost every keyword and construct defined in the configuration language has been used in the following sample configuration file.

configuration MyConfig is                                          

  Partition_1 : Partition := ();
  procedure Master_Procedure is in Partition_1;                    

  Partition_2, Partition_3 : Partition;

  for Partition_2'Host use "foo.bar.com";                          

  function Best_Node (Partition_Name : String) return String;
  pragma Import (Shell, Best_Node, "best-node");
  for Partition_3'Host use Best_Node;                              

  Partition_4 : Partition := (RCI_B5);                             

  for Partition_1'Directory use "/usr/you/test/bin";             
  for Partition'Directory use "bin";                             

  procedure Another_Main;
  for Partition_3'Main use Another_Main;                           

  for Partition_3'Reconnection use Block_Until_Restart;          
  for Partition_4'Command_Line use "-v";                           
  for Partition_4'Termination use Local_Termination;               

  pragma Starter (Convention => Ada);                                  

  pragma Boot_Server
    (Protocol_Name => "tcp",
     Protocol_Data => "`hostname`:`unused-port`");                 

  pragma Version (False);                                          

begin                                                              
   Partition_2 := (RCI_B2, RCI_B4, Normal);                        
   Partition_3 := (RCI_B3);                                        
end MyConfig;
  • Line 01 Typically, after having created the following configuration file the user types:

    po_gnatdist myconfig.cfg
    

    If the user wants to build only some partitions then he will list the partitions to build on the po_gnatdist command line as follows:

    po_gnatdist myconfig.cfg partition_2 partition_3
    

    The name of the file prefix must be the same as the name of the configuration unit, in this example myconfig.cfg. The file suffix must be cfg. For a given distributed application the user can have as many different configuration files as desired.

  • Line 04 Partition 1 contains no RCI package. However, it will contain the main procedure of the distributed application, called Master_Procedure in this example. If the line procedure Master_Procedure is in Partition_1; was missing, Partition 1 would be completely empty. This is forbidden, because a partition has to contain at least one library unit.

    po_gnatdist produces an executable with the name of Master_Procedure which will start the various partitions on their host machines in the background. The main partition is launched in foreground. Note that by killing this main procedure the whole distributed application is terminated.

  • Line 08 Specify the host on which to run partition 2.

  • Line 12 Use the value returned by a program to figure out at execution time the name of the host on which partition 3 should execute. For instance, execute the shell script best-node which takes the partition name as parameter and returns a string giving the name of the machine on which partition_3 should be launched.

  • Line 14 Partition 4 contains one RCI package RCI_B5 No host is specified for this partition. The startup script will ask for it interactively when it is executed.

  • Line 16 Specify the directory in which the executable of partition partition_1 will be stored.

  • Line 17 Specify the directory in which all the partition executables will be stored (except partition_1, see Pragmas and Representation Clauses). Default is the current directory.

  • Line 20 Specify the partition main subprogram to use in a given partition.

  • Line 22 Specify a reconnection policy in case of a crash of Partition_3. Any attempt to reconnect to Partition_3 when this partition is dead will be blocked until Partition_3 restarts. By default, any restart is rejected (Reject_On_Restart). Another policy is to raise Communication_Error on any reconnection attempt until Partition_3 has been restarted.

  • Line 23 Specify additional arguments to pass on the command line when a given partition is launched.

  • Line 24 Specify a termination mechanism for partition_4. The default is to compute a global distributed termination. When Local_Termination is specified a partition terminates as soon as local termination is detected (standard Ada termination).

  • Line 26 Specify the kind of startup method the user wants. There are 3 possibilities: Shell, Ada and None. Specifying Shell builds a shell script. All the partitions will be launched from a shell script. If Ada is chosen, then the main Ada procedure itself is used to launch the various partitions. If method None is chosen, then no launch method is used and the user must start each partition manually.

    If no starter is given, then an Ada starter will be used.

    In this example, Partition_2, Partitions_3 and Partition_4 will be started from Partition_1 (ie from the Ada procedure Master_Procedure).

  • Line 30 Specify the use of a particular boot server.

  • Line 32 It is a bounded error to elaborate a partition of a distributed program that contains a compilation unit that depends on a different version of the declaration of an RCI library unit than the one included in the partition to which the RCI library unit was assigned. When the pragma Version is set to False, no consistency check is performed.

  • Line 34 The configuration body is optional. The user may have fully described his configuration in the declaration part.

  • Line 35 Partition 2 contains two RCI packages RCI_B2 and RCI_B4 and a normal package. A normal package is not categorized.

  • Line 36 Partition 3 contains one RCI package RCI_B3

8.5.5. Partition Runtime Parameters

You can adjust some parameters of your DSA applications using the PolyORB configuration file, polyorb.conf. The parameters relevant to the Ada Distributed Systems Annex are specified in the [dsa] section.

See Run-time configuration for complete documentation of PolyORB’s runtime configuration facilities.

name_service = [IOR/corbaloc]
You can set this parameter instead of the environment variable POLYORB_DSA_NAME_SERVICE. Though if you use a Starter, ensure that this parameter is set for all the partitions, as this is not done automatically as for the POLYORB_DSA_NAME_SERVICE environment variable.
max_failed_requests = [integer]
Each partition will attempt a given number of requests to the name server before failing. This allows some time for every partition to register in the name server.
delay_between_failed_requests = [duration in milliseconds]
As above, only this specifies the delay between requests.
termination_initiator = [true/false]
Is this partition a termination initiator.
termination_policy = [global_termination/deferred_termination/local_termination]
The termination policy for this partition.
tm_time_between_waves = [duration in milliseconds]
The delay between termination waves.
tm_time_before_start = [duration in milliseconds]
The delay before the termination manager starts sending waves.
detach = [true/false]
If true, the partition will be detached.
rsh_options = [string]
Options passed to the rsh command when using the module polyorb.dsa_p-remote_launch
rsh_command = [string]
Which command should the module polyorb.dsa_p-remote_launch use to spawn remote programs.

8.5.6. Gnatdist Internals

Here is what goes on in po_gnatdist when building a distributed application:

  • Each compilation unit in the program is compiled into an object module (as for non distributed applications). This is achieved by calling gnatmake on the sources of the various partitions.
  • Stubs and skeletons are compiled into object modules (these are pieces of code that allow a partition running on machine A to communicate with a partition running on machine B). Several timestamp checks are performed to avoid useless code recompilation and stub generation.
  • po_gnatdist performs a number of consistency checks. For instance it checks that all packages marked as remote call interface (RCI) and shared passive (SP) are mapped onto partitions. It also checks that a RCI or SP package is mapped onto only one partition.
  • Finally, the executables for each partition in the program are created. The code to launch partitions is embedded in the main partition except if another option has been specified (see Pragma Starter). In this case, a shell script (or nothing) is generated to start the partitions on the appropriate machines. This is specially useful when one wants to write client / server applications where the number of instances of the partition is unknown.

All Gnatdist intermediate files (object files, etc) are stored under a common directory named “dsa”. The user may remove this whole directory and its content when he does not intend to rebuild his distributed applications.

8.5.7. PolyORB PCS Internals

This section provides notes on the PolyORB implementation of the DSA PCS. Some of these features are not configurable by the user.

8.5.7.1. Application Startup

A name server normally needs to be started prior to starting any application partition. Once the name server is started, its location must be passed to all partitions as the name_service runtime parameter in the [dsa] section of the configuration. When using an Ada starter, it is sufficient to pass the name server location to the starter, and it will be propagated automatically to all partitions. When using an embedded name server, the name server is part of the main partition, and does not need to be passed explicitly.

Upon elaboration, each partition registers its RCI packages with the name server. Once this is done, remote calls to RCI subprograms can proceed. Partitions cache the replies from the name server so that during the course of normal execution, inter-partition calls only involve the caller and callee partitions (not the name server).

When the name server kind is set to None, no name server is started, and no attempt is made to register RCI units. Their locations must then be set in the po_gnatdist configuration file using Self_Location attributes for all partitions, or overridden in run-time configuration by setting the <partition>’location parameter in the @t:cite:dsa section. A location pair (<protocol-name>, <protocol-data>) is encoded as a URI: <protocol-name>://<protocol-data>.

For example, to specify that a partition server_part is to be reachable using TCP on host somehost, port 5555, either use the following setting in the gnatdist configuration file:

for server_part'Self_Location use ("tcp", "somehost:5555");

or the following settings in PolyORB runtime configuration:

[dsa]
server_part'location=tcp://somehost:5555

RCI units then act as ‘clearinghouses’ for other partitions to exchange RACWs and set up dynamic communication paths.

8.5.7.2. Heterogeneous System

The GNAT environment provides default stream attributes, except for non-remote access types (see Transmitting Dynamic Structure and Marshalling and Unmarshalling Operations). The implementation of the default attributes of predefined types can be found in System.Stream_Attributes (s-stratt.adb).

The PolyORB PCS provides alternative data representations by default to ensure portability of the data stream across partitions executing on heterogeneous architectures. Users may override these representation aspects by configuring the protocol personality of their choice.

8.5.7.3. Allocating Partition Ids

The Partition_ID is allocated dynamically, at run-time. Each partition connects to a Partition ID Server which is located on the boot server and asks for a free Partition_ID. The advantage of this approach is that it supports easily client / server solution (client partitions may be duplicated, they will obtain different Partition Ids). There is no need to recompile or relink all the partitions when a new partition is added to the system. The Partition_ID is not tied in any way to a specific protocol or to a specific location.

8.5.7.4. Executing Concurrent Remote Calls

When multiple remote subprogram calls occur on the same partition, they are handled by several anonymous tasks. The number of tasks in the anonymous tasks pool can be configured by three figures (see Partition Attribute Task_Pool). Therefore, the user may have to synchronize global data in the Remote_Call_Interface or Remote_Types unit to preserve concurrent access on data. If the user want to suppress the multiple requests features, he can force the configuration of the anonymous tasks pool to (0 | 1, 0 | 1, 1). That means that there will be at most one anonymous task running at a time.

8.5.7.5. Priority Inheritance

It is compiler-dependent whether the caller priority is preserved during a remote procedure call. In fact, it can be unsafe to rely on priorities, because two partitions may have different priority ranges and policies. Nevertheless, PolyORB preserves the caller priority. This priority is marshaled and unmarshaled during the remote procedure call and the priority of the anonymous task on the server is set to the caller priority.

This default policy can be modified by using pragma Priority Pragma Priority and partition attribute Priority Partition Attribute Priority.

8.5.7.6. Remote Call Abortion

When a remote procedure call is aborted, PolyORB will abort the calling task on the caller side. It will also try to abort the remote anonymous task performing the remote call, unless runtime parameter abortable_rpcs in section [tasking] is set False on the server.

8.6. Running a DSA application

By default po_gnatdist will use the Ada starter. So if you have not specified pragma Starter (None); in the po_gnatdist configuration file, you should have a starter in your build directory, named after the main procedure defined in the configuration file. In this case you just have to run this program.

If you don’t want to use the Starter and have specified pragma Starter (None); in your configuration file, then you should have, in your Partition’Directory, one binary for each of your partitions. You’ll have to start each of these programs manually.

In both cases you must specify a name server for your application. You can use for example the one included in PolyORB: po_cos_naming. When running this name server it will output its IOR URI named POLYORB_CORBA_NAME_SERVICE.

Just ensure that you set the global environment variable POLYORB_DSA_NAME_SERVICE to an IOR URI referencing the running name server. When using the po_cos_naming name server just set POLYORB_DSA_NAME_SERVICE environment variable to the first value output for POLYORB_DSA_NAME_SERVICE before launching each DSA partition.

Here is a small trace output that demonstrates the setup

polyorb/examples/dsa/echo% ../../../tools/po_cos_naming/po_cos_naming&
polyorb/examples/dsa/echo% POLYORB_CORBA_NAME_SERVICE=''....''

polyorb/examples/dsa/echo% export POLYORB_DSA_NAME_SERVICE=''...''
polyorb/examples/dsa/echo% ./client
The client has started!
Thus spake my server upon me:Hi!